《BS EN 573-4-2004 Aluminium and aluminium alloys — Chemical composition and form of wrought products — Part 4 Forms of products.pdf》由会员分享，可在线阅读，更多相关《BS EN 573-4-2004 Aluminium and aluminium alloys — Chemical composition and form of wrought products — Part 4 Forms of products.pdf（24页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 573-4:2004 Aluminium and aluminium alloys Chemical composition and form of wrought products Part 4: Forms of products The European Standard EN 573-4:2004 has the status of a British Standard ICS 77.150.10; 77.120.10 ? Licensed Copy: Institute Of Technology Tallaght, Institute
2、of Technology, Wed Sep 27 23:44:27 BST 2006, Uncontrolled Copy, (c) BSI BS EN 573-4:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 26 January 2004 BSI 26 January 2004 ISBN 0 580 43332 3 National foreword This British Standard is the off
3、icial English language version of EN 573-4:2004. It supersedes BS EN 573-4:1995 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee NFE/35, Light metals and their alloys, to Subcommittee NFE/35/5, Wrought aluminium and aluminium alloys, which has the resp
4、onsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled
5、 “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance wi
6、th a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related interna
7、tional and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 20, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was
8、last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Sep 27 23:44:27 BST 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 573-4 January 2004 ICS 77.150.10; 77.120.10Su
9、persedes EN 573-4:1994 English version Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products Aluminium et alliages daluminium - Composition chimique et forme des produits corroys - Partie 4: Formes des produits Aluminium und Aluminiumlegierung
10、en - Chemische Zusammensetzung und Form von Halbzeug - Teil 4: Erzeugnisformen This European Standard was approved by CEN on 4 December 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nat
11、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in a
12、ny other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germ
13、any, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050
14、 Brussels 2004 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 573-4:2004: E Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Sep 27 23:44:27 BST 2006, Uncontrolled Copy, (c) BSI EN 573-4:2004 (E) 2 Cont
15、ents page Foreword3 1Scope 5 2Normative references5 3Classification5 4Forms of products .5 Annex A (normative) Guidelines for the registration of new wrought aluminium and aluminium alloys in CEN/TC 132 standards and for the elimination of existing alloys from these standards17 A.1General principles
16、17 A.2Rules for registration of new alloys.17 A.2.1General conditions 17 A.2.2Additional conditions for “Class A“ alloys .17 A.3Procedure for registration of new alloys.18 A.3.1Proposal of registration of a new alloy18 A.3.2Approval procedure for “Class A“ alloys prior to TC enquiry 18 A.3.3Implemen
17、tation of new alloys in CEN/TC 132 standards.18 A.4Modification of the rating of an alloy from “Class A“ to “Class B“18 A.5Deletion of alloys from EN 573-3 and EN 573-418 Annex B (informative) European standards specifying mechanical properties for product groups relevant to Tables 1 to 819 Bibliogr
18、aphy20 Table 1 Applications and forms of products 1000 series .7 Table 2 Applications and forms of products 2000 series .8 Table 3 Applications and forms of products 3000 series .9 Table 4 Applications and forms of products 4000 series .10 Table 5 Applications and forms of products 5000 series .11 T
19、able 6 Applications and forms of products 6000 series.13 Table 7 Applications and forms of products 7000 series.15 Table 8 Applications and forms of products 8000 series.16 Table B.119 Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Sep 27 23:44:27 BST 2006, Uncontrolle
20、d Copy, (c) BSI w w w . b z f x w . c o m EN 573-4:2004 (E) 3 Foreword This document (EN 573-4:2004) has been prepared by Technical Committee CEN /TC 132, “Aluminium and aluminium alloys“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national stand
21、ard, either by publication of an identical text or by endorsement, at the latest by July 2004, and conflicting national standards shall be withdrawn at the latest by July 2004. Within its programme of work, Technical Committee CEN/TC 132 has been entrusted to prepare the following standard : EN 573-
22、4, Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4 : Forms of products. This standard is part of a set of five standards. The other standards deal with : EN 573-1, Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 1 :
23、Numerical designation system. EN 573-2, Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 2 : Chemical symbol based designation system. EN 573-3, Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 3 : Chemical composition. EN
24、 573-5, Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 5 : Codification of standardized wrought products. This document supersedes EN 573-4:1994. CEN/TC 132 has decided to revise this standard every two years if necessary. The following technical changes have
25、 been introduced during the revision : clause 1 :note modified ; Tables 1 to 8 :columns Rolling ingots and Extrusion ingots deleted ; column Extruded and drawn products split up ; Table 3 :alloys EN AW-3105B and EN AW-3005A added ; Table 4 :alloy EN AW-4014 deleted ; alloys EN AW-4016, EN AW-4017 an
26、d EN AW-4018 added ; Table 5 :alloys EN AW-5119A, EN AW-5449, EN AW 5654A, EN AW-5356A, EN AW-5456B EN AW-5556B, EN AW-5183A, EN AW-5383, EN AW- 5186 and EN AW-5187 added ; Table 6 :alloys EN AW-6008 and EN AW-6016 added ; Table 8 :alloys EN AW-8021B and EN AW-8015 added ; Annexes A and B :added. An
27、nex A is normative. Annex B is informative. Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Sep 27 23:44:27 BST 2006, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 573-4:2004 (E) 4 According to the CEN/CENELEC Internal Regulations, the national standards organ
28、izations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United King
29、dom. Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Sep 27 23:44:27 BST 2006, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 573-4:2004 (E) 5 1 Scope This European Standard gives the forms of products which are currently available for wrought aluminium and alu
30、minium alloys, for each major field of application. It applies to aluminium and aluminium alloys with the chemical compositions specified in EN 573-3. NOTESome of the products listed in the present standard can be subject to patent or patent applications, and their listing herein does not in any way
31、 imply the granting of a licence under such patent right. CEN/TC 132 affirms it is its policy that in the case when a patentee refuses to grant licences on standardised standard products under reasonable and not discriminatory conditions then this product shall be removed from the corresponding stan
32、dard. It uses the four-figure numerical and the alternative chemical symbol based alloy designation systems specified respectively in EN 573-1 and EN 573-2. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative r
33、eferences are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references
34、 the latest edition of the publication referred to applies (including amendments). EN 573-2, Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 2 : Chemical symbol based designation system. EN 573-3, Aluminium and aluminium alloys - Chemical composition and form
35、of wrought products Part 3 : Chemical composition. EN 602, Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food. 3 Classification For the purposes of this part of this European Standard, aluminium
36、and aluminium alloys are classified into two classes, A and B, as follows. Class A : Aluminium and aluminium alloys for the relevant field of application, for which the mechanical properties are specified in the corresponding European Standard (see annex B) ; Class B : Aluminium and aluminium alloys
37、 produced in limited volume for the relevant field of application, and/or Aluminium and aluminium alloys used for special applications not covered by a European Standard. The mechanical properties of these alloys are not specified in the corresponding European Standard when one exists. NOTE 1Toleran
38、ces on dimensions and form, as specified in the relevant European Standards, apply to both “Class A“ and “Class B“ aluminium and aluminium alloys. NOTE 2Aluminium and aluminium alloys for aerospace applications, which are standardized by AECMA but stand outside the field of general engineering, are
39、in “Class B“. Their mechanical properties and tolerances on form and dimensions are specified in the relevant European Aerospace Standards. 4 Forms of products Tables 1 to 8 give, for each major field of application, the availability of each alloy as defined by their classification as a “Class A“ or
40、 a “Class B“ alloy. Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Sep 27 23:44:27 BST 2006, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 573-4:2004 (E) 6 The last column indicates whether the alloy is in conformity Y or N (Yes or No) with EN 602, which spec
41、ifies the requirements for the chemical composition of wrought aluminium and aluminium alloys used for the production of materials and articles intended to be in contact with food. The informative annex B indicates which European Standards specify mechanical properties for the product groups accordi
42、ng to Tables 1 to 8. Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Sep 27 23:44:27 BST 2006, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 573-4:2004 (E) 7 Table 1 Applications and forms of products 1000 series Alloy designationForgings and Wire and drawing
43、stockDrawn products Extruded products FoilFinstockSheet, strip and plate Can stock and SlugsElectro- welded Alloys for NumericalChemical symbolsforging stock ElectricalWeldingMechanicalclosurestubefoodstuff application EN AW-1199 EN AW-1098 EN AW-1198 EN AW-1090 EN AW-1085 EN AW-Al 99,99 EN AW-Al 99
44、,98 EN AW-Al 99,98(A) EN AW-Al 99,90 EN AW-Al 99,85 - - - - - - - - - - - B - - - - A - B - - - - - - - - - - - B - B - - - - - - - B B B - B - - - - - - A - - - - - - - - Y Y Y Y Y EN AW-1080A EN AW-1070A EN AW-1370 EN AW-1060 EN AW-1050A EN AW-Al 99,8(A) EN AW-Al 99,7 EN AW-EAl 99,7 EN AW-Al 99,6
45、EN AW-Al 99,5 - - - - B - - A - - A - - - A A A - - A B B B A B A - B A - - - B A - - - - A A A - B A - - - - B A A - - A - - - - - Y Y Y Y Y EN AW-1350 EN AW-1350A EN AW-1450 EN AW-1235 EN AW-1200 EN AW-EAl 99,5 EN AW-EAl 99,5(A) EN AW-Al 99,5 Ti EN AW-Al 99,35 EN AW-Al 99,0 - - - - - A - - - - - -
46、 B - - - - - - B B - - - A A - - - A - - - B A - - - - A - B - - A - - - - - - - - - A - - - - - Y Y Y Y Y EN AW-1200A EN AW-1100 EN AW-Al 99,0(A) EN AW-Al 99,0Cu - - - - - - - - - B - B - B - A B B - - - - - - Y Y Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Wed Sep 27
47、23:44:27 BST 2006, Uncontrolled Copy, (c) BSI w w w . b z f x w . c o m EN 573-4:2004 (E) 8 Table 2 Applications and forms of products 2000 series Alloy designationForgings and Wire and drawing stockDrawn products Extruded products FoilFinstockSheet, strip Can stock and SlugsElectro- welded Alloys f
48、or NumericalChemical symbolsforging stock ElectricalWeldingMechanicaland plateclosurestubefoodstuff application EN AW-2001 EN AW-2007 EN AW-2011 EN AW-2011A EN AW-2014 EN AW-Al Cu5,5MgMn EN AW-Al Cu4PbMgMn EN AW-Al Cu6BiPb EN AW-Al Cu6BiPb(A) EN AW-Al Cu4SiMg - - B - A - - - - - - - - - - - - A - -
49、B A A A A B A A A A - - - - - - - - - - - - - - A - - - - - - - A - - - - - - - N N N N N EN AW-2014A EN AW-2214 EN AW-2017A EN AW-2117 EN AW-2618A EN AW-Al Cu4SiMg(A) EN AW-Al Cu4SiMg(B) EN AW-Al Cu4MgSi(A) EN AW-Al Cu2,5Mg EN AW-Al Cu2Mg1,5Ni B B B - B - - - - - - - - - - A - A A - A B A - B A B A - B - - - - - - - - - - A B A B B - - - - - - - - - - - - - - - N N N N N EN AW-2219 EN AW-2319 EN AW-2024 EN AW-2124 EN AW-20