AS-4037-1999.pdf

上传人:韩长文 文档编号:3733062 上传时间:2019-09-22 格式:PDF 页数:84 大小:1.60MB
返回 下载 相关 举报
AS-4037-1999.pdf_第1页
第1页 / 共84页
AS-4037-1999.pdf_第2页
第2页 / 共84页
AS-4037-1999.pdf_第3页
第3页 / 共84页
AS-4037-1999.pdf_第4页
第4页 / 共84页
AS-4037-1999.pdf_第5页
第5页 / 共84页
亲,该文档总共84页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

《AS-4037-1999.pdf》由会员分享,可在线阅读,更多相关《AS-4037-1999.pdf(84页珍藏版)》请在三一文库上搜索。

1、AS 40371999 Australian Standard Pressure equipmentExamination and testing Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 25 Aug 2008 This Australian Standard was prepared by Committee ME/1, Pressure Equipment. It was approved on behalf of the Council of Standards Australia on 16 August 1999 and publis

2、hed on 5 September 1999. The following interests are represented on Committee ME/1: A.C.T. WorkCover Australasian Corrosion Association Australasian Institute of Engineer Surveyor Australian Aluminium Council Australian Building Codes Board Australian Chamber of Commerce and Industry Australian Indu

3、stry Group Australian Institute of Energy Australian Institute of Petroleum Boiler and Pressure Vessel Manufacturers Association of Australia Bureau of Steel Manufacturers of Australia Department for Administration and Information Services, S.A. Department of Employment Training and Industrial Relat

4、ions, Qld Department of Industries and Business, N.T. Department of Infrastructure, Energy and Resources (Tasmania) Department of Labour, New Zealand Electricity Corporation of New Zealand Electricity Supply Association of Australia Institute of Materials Engineering Australasia Institution of Engin

5、eers, Australia Institution of Professional Engineers, New Zealand National Association of Testing Authorities, Australia New Zealand Engineering Federation New Zealand Heavy Engineering Research Association New Zealand Institute of Welding New Zealand Petrochemical Users Group Victorian WorkCover A

6、uthority Welding Technology Institute of Australia WorkCover N.S.W. WorkSafe Western Australia Review of Australian Standards. To keep abreast of progress in industry, Australian Standards are subject to periodic review and are kept up to date by the issue of amendments or new editions as necessary.

7、 It is important therefore that Standards users ensure that they are in possession of the latest edition, and any amendments thereto. Full details of all Australian Standards and related publications will be found in the Standards Australia Catalogue of Publications; this information is supplemented

8、 each month by the magazine The Australian Standard, which subscribing members receive, and which gives details of new publications, new editions and amendments, and of withdrawn Standards. Suggestions for improvements to Australian Standards, addressed to the head office of Standards Australia, are

9、 welcomed. Notifi cation of any inaccuracy or ambiguity found in an Australian Standard should be made without delay in order that the matter may be investigated and appropriate action taken. This Standard was issued in draft form for comment as DR 98310. Accessed by UNIVERSITY OF SOUTH AUSTRALIA on

10、 25 Aug 2008 AS 40371999 Australian Standard Pressure equipmentExamination and testing Originated as AS 40371992. Second edition 1999. Published by Standards Australia (Standards Association of Australia) 1 The Crescent, Homebush, NSW 2140 ISBN 0 7337 2923 1 Accessed by UNIVERSITY OF SOUTH AUSTRALIA

11、 on 25 Aug 2008 AS 403719992 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME/1, Pressure Equipment to supersede AS 40371992, Boilers and pressure vesselsExamination and testing. This Standard is the result of a consensus among representatives on

12、 the Joint Committee to produce it as a Joint Australian/New Zealand Standard. Consensus means general agreement by all parties. Consensus includes an attempt to remove all objections and implies much more than the concept of a simple majority, but not necessarily unanimity. It is consistent with th

13、is meaning that a member may be included in the Committee list and yet not be in full agreement with all clauses of this Standard. The objective of this Standard is to reduce misunderstanding, costs and delays in non- destructive examination, improve safety, prevent unnecessary duplication of tests

14、and promote greater confidence in reciprocal acceptance of approved procedures. This Standard is one of the core documents which form part of the revised arrangement of the pressure equipment Standards under the umbrella of AS/NZS 1200, Pressure equipment. The first issue of the Standard unified and

15、 replaced the requirements for the non- destructiveexaminationmethodsoftestandthequalificationofnon-destructive examinationpersonnelspecifiedinAS 1210,Pressurevessels,AS 1228,Pressure equipmentBoilers and AS 4041, Pressure piping. This revised issue is utilized by direct reference in the above Stand

16、ards. The main changes in this revision are as follows: Incorporation of Amendment No.1 to AS 40371992. Updated referenced documents. Recognition of moves to self-regulation in the pressure equipment industry. Replacement of inspection authority with inspection body and introduction of testing body.

17、 Alignment with AS/NZS 3992 and AS 4458. Recognition for automatic non-destructive examination (NDE). Introduction of time of flight diffraction (ToFD) ultrasonic examination. Introduction of requirements for acoustic emission. Editorial improvements and clarification in various areas. Clarification

18、 of NDE for boiler tube. Provision for non-destructive examination of non-metallic materials. Statements referred in mandatory terms in notes to tables and figures are deemed to be requirements of this Standard. The terms normative and informative have been used in this Standard to define the applic

19、ation of the appendix to which they apply. A normative appendix is an integral part of a Standard, whereas an informative appendix is only for information and guidance. Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 25 Aug 2008 3AS 40371999 CONTENTS Page SECTION 1 SCOPE AND GENERAL 1.1SCOPE . . . . .

20、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 1.2APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 1.3REFERENCED DOCUMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 1.4DEFINITIONS . . .

21、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 SECTION 2 MATERIAL GROUPING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 SECTION 3 NON-DESTRUCTIVE EXAMINATION METHODSWELDED JOINTS 3.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . .

22、 . . . . . . . . . . . . . . . . . .11 3.2VISUAL EXAMINATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 3.3RADIOGRAPHIC EXAMINATION OF WELDED JOINTS . . . . . . . . . . . .11 3.4ULTRASONIC EXAMINATION OF WELDED JOINTS . . . . . . . . . . . . . .15 3.5MAGNETIC PARTICLE EXA

23、MINATION OF WELDED JOINTS . . . . . . .16 3.6PENETRANT EXAMINATION OF WELDED JOINTS . . . . . . . . . . . . . . .16 3.7OTHER METHODS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 SECTION 4 QUALIFICATION OF NON-DESTRUCTIVE EXAMINATION PERSONNEL 4.1RADIOGRAPHIC AND

24、ULTRASONIC EXAMINATION . . . . . . . . . . . . .17 4.2VISUAL, MAGNETIC PARTICLE, DYE PENETRANT, EDDY CURRENT AND ACOUSTIC EMISSION EXAMINATION. . . . . .17 4.3EXAMINATION OF IMPORTED COMPONENTS . . . . . . . . . . . . . . . . . .17 SECTION 5 NON-DESTRUCTIVE EXAMINATION SCHEDULE . . . . . . . . . . .

25、 . .18 SECTION 6 STAGE OF NON-DESTRUCTIVE EXAMINATION . . . . . . . . . . . . . .18 SECTION 7 EXTENT OF NON-DESTRUCTIVE EXAMINATION OF WELDED JOINTS 7.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 7.2TYPES OF WELDED JOINTS. . . . . . . . . . .

26、. . . . . . . . . . . . . . . . . . . . .19 7.3100 PERCENT EXAMINATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 7.4SPOT EXAMINATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 SECTION 8 ACCEPTANCE CRITERIA FOR WELD IMPERFECTIONS REVEALED BY NON-D

27、ESTRUCTIVE EXAMINATION 8.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 8.2POROSITY CHARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 8.3SURFACE IMPERFECTIONS . . . . . . . . . . . . . . . . . . . . . . . . .

28、 . . . . . . . .35 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 25 Aug 2008 AS 403719994 Page SECTION 9 RE-EXAMINATION AND REPAIR OF WELDED JOINTS WITH IMPERFECTIONS OUTSIDE OF LEVELS OF ACCEPTANCE CRITERIA 9.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29、 . . . .42 9.2WELDS SUBJECT TO 100 PERCENT EXAMINATION . . . . . . . . . . . . . .42 9.3WELDS SUBJECT TO SPOT EXAMINATION. . . . . . . . . . . . . . . . . . . .42 SECTION 10 NON-DESTRUCTIVE EXAMINATION OF PRODUCTION AND WELDER QUALIFICATION TEST WELDS. . . . . . . . . . . . . . . . . .43 SECTION 11

30、ADDITIONAL NON-DESTRUCTIVE EXAMINATION FOR CONSTRUCTION IN SPECIFIC MATERIALS 11.1CLAD AND LINED CONSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . .44 11.2HIGH ALLOY STEEL CONSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . .44 11.3NICKEL ALLOYS . . . . . . . . . . . . . . . . . .

31、 . . . . . . . . . . . . . . . . . . . . . . .45 11.4UNALLOYED TITANIUM OR ZIRCONIUM . . . . . . . . . . . . . . . . . . . . . .45 11.5QUENCHED AND TEMPERED STEELS . . . . . . . . . . . . . . . . . . . . . . . . .45 11.6DISSIMILAR METAL JOINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32、. . . .45 11.7ACCEPTANCE CRITERIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 SECTION 12 ADDITIONAL NON-DESTRUCTIVE EXAMINATION FOR TEMPORARY ATTACHMENTS AND ARC STRIKES 12.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33、46 12.2REPAIR OF IMPERFECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 SECTION 13 ADDITIONAL NON-DESTRUCTIVE EXAMINATION FOR COMPONENTS DESIGNED FOR SPECIFIC PURPOSE OR CONSTRUCTION 13.1COMPONENTS CONTAINING LETHAL SUBSTANCES . . . . . . . . . . . . .47 13.2COMPONENTS SUBJE

34、CT TO EXTERNAL PRESSURE . . . . . . . . . . . . . .47 13.3PNEUMATICALLY TESTED CONSTRUCTIONS . . . . . . . . . . . . . . . . . .47 13.4EXPANSION BELLOWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 SECTION 14 REPORTS AND RECORDS OF WELDED CONSTRUCTIONS 14.1APPLICATION .

35、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 14.2INFORMATION TO BE REPORTED. . . . . . . . . . . . . . . . . . . . . . . . . . .48 14.3SPECIFIC INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 14.4IDENTIFICATION OF WELDS. . . .

36、 . . . . . . . . . . . . . . . . . . . . . . . . . . .48 14.5RETENTION OF RECORDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 SECTION 15 NON-DESTRUCTIVE EXAMINATION OF CASTINGS 15.1METHOD OF EXAMINATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 15.2E

37、XTENT OF EXAMINATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 15.3ACCEPTANCE CRITERIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 15.4REPAIRS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 15.5MARKING

38、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 15.6REPORTING OF EXAMINATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 15.7RETENTION OF RECORDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Accessed by UNIVERSITY

39、 OF SOUTH AUSTRALIA on 25 Aug 2008 5AS 40371999 Page SECTION 16 NON-DESTRUCTIVE EXAMINATION OF FORGINGS 16.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 16.2METHOD AND EXTENT OF EXAMINATION . . . . . . . . . . . . . . . . . . . .52 16.3REFERENC

40、E STANDARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 16.4CALIBRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 16.5SCANNING REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 16.6ACCEPTANCE CRITERI

41、A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 16.7INTERPRETATION OF RESULTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 16.8REPORTING EXAMINATION AND RECORDS. . . . . . . . . . . . . . . . . . .52 16.9RETENTION OF RECORDS . . . . . . . . . . . . . . . . .

42、. . . . . . . . . . . . . . . . .53 SECTION 17 HYDROSTATIC TESTING 17.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 17.2TEST PRESSURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 17.3HYDROSTATIC TEST PROCE

43、DURE . . . . . . . . . . . . . . . . . . . . . . . . . . .54 17.4TEST REQUIREMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 17.5REPORTING OF RESULTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 SECTION 18 PNEUMATIC TESTS 18.1APPLICATION . . .

44、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 18.2GENERAL PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 18.3EXAMINATION OF WELDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 18.4TEST TEMPERATURE. . . . .

45、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 18.5TEST PRESSURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 18.6TEST PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 18.7TEST REQUIREMENTS. . . . .

46、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 18.8REPORTING OF RESULTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 18.9COMBINED HYDROSTATIC/PNEUMATIC TEST . . . . . . . . . . . . . . . . . .57 SECTION 19 LEAK TESTS 19.1PRELIMINARY LEAK TEST . . . . . . . .

47、 . . . . . . . . . . . . . . . . . . . . . . . . .58 19.2SENSITIVE LEAK TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 SECTION 20 ALTERNATIVE TESTS TO HYDROSTATIC AND PNEUMATIC TESTING 20.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

48、. . . . . . . . . .59 20.2APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 SECTION 21 PROOF HYDROSTATIC TESTS . . . . . . . . . . . . . . . . . . . . . . . . . . .60 SECTION 22 SPECIAL EXAMINATIONS AND TESTS . . . . . . . . . . . . . . . . . . . .60

49、 SECTION 23 ACOUSTIC EMISSION EXAMINATION 23.1GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 23.2OBJECTIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 23.3APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 23.4PRE-EXAMINATION REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . .62 23.5EXAMINATION PROCEDURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 23.6QUALIFICATION OF EXAMINATION PROCEDUR

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 其他


经营许可证编号:宁ICP备18001539号-1