《BS-7016-6-1992 ISO-7967-6-1992.pdf》由会员分享，可在线阅读，更多相关《BS-7016-6-1992 ISO-7967-6-1992.pdf（20页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS 7016-6: 1992 ISO 7967-6: 1992 Components and systems of reciprocating internal combustion engines Part 6: Glossary of terms for lubricating systems UDC 621.432-71:001.4 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006,
2、Uncontrolled Copy, (c) BSI BS 7016-6:1992 This British Standard, having been prepared under the direction of the Machinery and Components Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 October 1992 BSI 10-1999 The following BSI refere
3、nces relate to the work on this standard: Committee reference MCE/14 Draft for comment 90/74059 DC ISBN 0 580 21217 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Machinery and Components Standards Policy Committee (MCE/-) to Technica
4、l Committee MCE/14, upon which the following bodies were represented: Association of Consulting Engineers British Railways Board Ministry of Defence Society of Motor Manufacturers and Traders Ltd. The following bodies were also represented in the drafting of the standard, through subcommittees and p
5、anels: Agricultural Engineers Association Association of British Generating Set Manufacturers British Industrial Truck Association Health and Safety Executive Marine Engine and Equipment Manufacturers Association Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Ba
6、nk University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 BSI 10-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative reference1 3Arrangement of terms and definitions2 4Types of lubricatin
7、g system3 5Lubricating systems3 6Components of lubricating systems5 7Components of lubricating oil filters9 Alphabetical indexes English11 French12 Russian13 List of referencesInside back cover Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2
8、006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 ii BSI 10-1999 National foreword This Part of BS 7016 has been prepared under the direction of the Machinery and Components Standards Policy Committee and is identical with ISO 7967-6:1992 Reciprocating internal combustion engines Vocabulary of componen
9、ts and systems Part 6: Lubicating systems published by the International Organization for Standardization (ISO). ISO 7967 consists of nine Parts as follows: Part 1: Structure and external covers; Part 2: Main running gear; Part 3: Valves, camshaft drive and actuating mechanisms; Part 4: Pressure cha
10、rging and air/exhaust gas ducting systems; Part 5: Cooling systems; Part 6: Lubricating systems; Part 7: Governing systems; Part 8: Starting systems; Part 9: Control and monitoring systems. Parts 1 to 9 of ISO 7967 will be implemented as Parts 1 to 9 of BS 7016. A British Standard does not purport t
11、o include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International StandardCorresponding British Standard ISO 2710
12、:1978BS 5676:1979 Vocabulary for reciprocating internal combustion engines (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 14, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have
13、 had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 BSI 10-19991 Licensed Copy: London South Ban
14、k University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 2 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 BSI 10-1999
15、3 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 4 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (
16、c) BSI BS 7016-6:1992 BSI 10-19995 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 6 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT
17、+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 BSI 10-19997 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 8 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank Un
18、iversity, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 BSI 10-19999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 10 BSI 10-1999 Licensed Copy: London South Ban
19、k University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 BSI 10-199911 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 12 BSI 10-1
20、999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 BSI 10-199913 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy,
21、 (c) BSI 14 blank Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6:1992 BSI 10-1999 List of references See national foreword. Licensed Copy: London South Bank University, London South Bank University,
22、Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-6: 1992 ISO 7967-6: 1992 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe
23、and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products
24、 and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers membe
25、rs an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001.
26、 In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standard
27、s through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to dat
28、e with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, i
29、n the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise with
30、out prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permiss
31、ion of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:41 GMT+00:00 2006, Uncontrolled Copy, (c) BSI