《BS-EN-12548-1999.pdf》由会员分享，可在线阅读，更多相关《BS-EN-12548-1999.pdf（16页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12548:1999 Incorporating Corrigenda Nos. 1 and 2 Lead and lead alloys Lead alloy ingots for electric cable sheathing and for sleeves The European Standard EN 12548:1999 has the status of a British Standard ICS 77.150.60 ? Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28
2、08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12548:1999 This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee on 15 December 1999 BSI 2006 ISBN 0 580 35149 1 National foreword Thi
3、s British Standard is the official English language version of EN 12548:1999. It supersedes BS 801:1984 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee NFE/22, Lead and lead alloys, which has the responsibility to: A list of organizations represented
4、on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by
5、 using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immuni
6、ty from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in th
7、e UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 12, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No.
8、DateComments 14065 Corrigendum No. 1 29 August 2002Addition of supersession details to national foreword 16645 Corrigendum No. 2 29 September 2006 Update to running header Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NOR
9、ME EUROPENNE EUROPISCHE NORM EN 12548 September 1999 ICS 77.150.60 English version Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves Plomb et alliages de plomb - Lingots en alliages de plomb pour gaines et manchons de cbles lectriques Blei und Bleilegerungen - Ble
10、ilegerungen in Blcken fr Kabelmntel und Muffen This European Standard was approved by CEN on 19 August 1999. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any altera
11、tion. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by transla
12、tion under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, It
13、aly, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 1999 CENAll rights of exploitation in any form
14、and by any means reserved worldwide for CEN national Members. Ref. No. EN 12548:1999 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 2 EN 12548:1999 Contents Foreword3 1Scope 4 2Normative references4 3Terms and definitions4 4Designati
15、on.5 4.1Material number.5 4.2Product.5 5Ordering information.5 6Requirements.6 6.1Chemical composition6 6.2Shape and size 6 6.3Surface condition .6 7Sampling and analysis6 7.1Sampling6 7.2Analysis6 7.3Rounding of the results of analysis6 8Documentation.7 8.1General 7 8.2Certificate of analysis.7 8.3
16、Declaration of conformity.7 9Marking and labelling7 9.1Marking 7 9.2Labelling.7 10Safety 7 Annex A (normative) European numbering system for lead and lead alloys 9 A.1Introduction 9 A.2General 9 A.3Details of the system9 A.4Allocation and administration of material numbers10 Annex B (informative) Cr
17、oss-references between alloy designations11 Bibliography12 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 3 EN 12548:1999 Foreword This European Standard has been prepared by Technical Committee CEN/TC 306 “Lead and lead alloys“, the S
18、ecretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2000, and conflicting national standards shall be withdrawn at the latest by March 2000. According to th
19、e CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, S
20、weden, Switzerland and the United Kingdom. Within its programme of work, Technical Committee CEN/TC 306 requested CEN/TC 306/WG 2 “Lead alloys” to prepare the following standard : EN 12548, Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves. Licensed Copy: sheffiel
21、dun sheffieldun, na, Sat Oct 28 08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 4 EN 12548:1999 1 Scope This European Standard specifies the designation, chemical composition, sampling and analysis, marking, labelling and other requirements for lead alloys in ingot form which are used for t
22、he manufacture of electric cable sheathing and sleeves. 2 Normative references This European Standard incorporates by dated or undated references, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter.
23、 For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 12402, Lead and lead alloys - Methods
24、of sampling for analysis. ISO 11014-1, Safety data sheet for chemical products - Part 1 : Content and order of sections. NOTEFor the chemical analysis, prestandards in preparation by CEN/TC 306/WG 3, see bibliography. 3 Terms and definitions For the purposes of this European Standard, the following
25、definitions apply: 3.1 cast product of one furnace or crucible melt. NOTEAll the ingots from a single cast have the same identifying mark. 3.2 ingot cast product intended for remelting and/or processing. 3.3 jumbo very large ingot, with a mass generally much more than 50 kg. 3.4 lead alloy metallic
26、substance consisting predominantly of lead, with one or more metallic elements intentionally included or retained. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 5 EN 12548:1999 3.5 bundle collection of ingots taken from a single cast
27、and secured if necessary, for the purposes of handling, shipment and storage. 4 Designation 4.1 Material number The material is designated by number (see table 1). This material number designation is in accordance with the system given in annex A (normative). 4.2 Product The product designation for
28、products to this standard shall consist of : - denomination (Lead alloy ingot or Lead alloy jumbo) ; - number of this European Standard (EN 12548) ; - material number (see 4.1). The derivation of a product designation is shown in the following example : EXAMPLE Lead alloy ingot EN 12548 - PB021K Den
29、omination Number of this European Standard Material number 5 Ordering information In order to facilitate the enquiry, order and confirmation of order procedures between the purchaser and the supplier, the purchaser shall state on his enquiry and order the following information : a) quantity of produ
30、ct required (mass) ; b) product designation (see 4.2) ; c) nominal mass of an ingot (in kilograms) and of a bundle or a jumbo (in tonnes). In addition, the purchaser shall also state on the enquiry and the order if any of the following is required : d) higher minimum levels for any elements listed i
31、n table 1 (see note 1 in table 1) ; e) maximum limits for any element(s) not listed in table 1 (see note 2 in table 1) ; f) mark and/or colour coding see 9.1 d) ; g) any special product form (see 6.2) ; h) certificate of analysis (see 8.2), and/or a declaration of conformity (see 8.3). Licensed Copy
32、: sheffieldun sheffieldun, na, Sat Oct 28 08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 6 EN 12548:1999 EXAMPLE : Ordering details for 200 t lead alloy ingots, conforming to EN 12548, in material number PB021K, nominal ingot mass 50 kg, nominal mass of a bundle 1 t , with colour coding ye
33、llow, with declaration of conformity : 200 t Lead alloy ingot - EN 12548 - PB021K - nominal ingot mass 50 kg - nominal bundle mass 1 t - colour coding yellow - with declaration of conformity 6 Requirements 6.1 Chemical composition The composition of the lead alloys shall conform to the requirements
34、given in table 1. 6.2 Shape and size The shape and size of ingots and jumbos shall be at the discretion of the supplier, unless otherwise agreed between the purchaser and the supplier. 6.3 Surface condition The surface condition of the ingots and jumbos shall be such that it does not affect the comp
35、osition and is not detrimental to the use of the products 7 Sampling and analysis 7.1 Sampling Sampling shall be carried out in accordance with EN 12402. 7.2 Analysis When analysis is carried out by the supplier to verify conformity of a cast, the analytical methods used shall be at his discretion.
36、NOTE 1When optical emission spectrometry is used, the method should conform to ENV 12908. In case of dispute concerning the results of analysis, the relevant methods of analysis of the prENVs in preparation (see bibliography) to be used to control the compositional conformity of a consignment, apply
37、. NOTE 2Due to the nature of samples prepared, only chemical analyses are feasible. 7.3 Rounding of the results of analysis The values obtained shall be rounded to the same number of decimal places as used to express the specified limit in table 1. The following rules shall be used for rounding : a)
38、 if the figure immediately after the last figure to be retained is less than 5, the last figure to be retained shall be kept unchanged ; b) if the figure immediately after the last figure to be retained is equal to or greater than 5, the last figure to be retained shall be increased by one. Licensed
39、 Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 7 EN 12548:1999 8 Documentation 8.1 General The supplier shall provide with each consignment the following minimum documentation, including a certificate of analysis in accordance with 8.2 and/or,
40、 if requested by the purchaser, a declaration of conformity in accordance with 8.3 : a) name and address ; b) material number ; c) mass of supplied product ; d) certificate of analysis (see 8.2). Other information can also be included, if agreed between the purchaser and the supplier. 8.2 Certificat
41、e of analysis The certificate of analysis is a document which certifies the chemical composition of each cast. The chemical composition shall be reported as the average of the results obtained on the samples taken during moulding unless otherwise agreed between the purchaser and the supplier. Other
42、information can also be included, if agreed between the purchaser and the supplier. 8.3 Declaration of conformity If a declaration of conformity is required, the content shall be agreed between the purchaser and the supplier. 9 Marking and labelling 9.1 Marking Each ingot shall be clearly and perman
43、ently marked with the following minimum information : a)name or identification mark of the manufacturer (usually cast into the product) ; b)cast identity. In addition, if agreed between the purchaser and the supplier : c)material number or short designation (see table 1) ; d)any additional marking (
44、for example, purchaser, colour code, etc.). The marking of jumbos shall be agreed between the purchaser and the supplier. 9.2 Labelling If required, labelling shall be agreed between the purchaser and the supplier. 10 Safety Any risks involved in handling and use of lead are detailed in the supplier
45、s safety data sheet. This data sheet shall conform to ISO 11014-1. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:53:16 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 8 EN 12548:1999 Table 1 - Chemical composition of lead alloy ingots for electric cable sheathing and for sleeves Composit
46、ion in % (mass fraction) Material numberShort designation for stamping ElementAlloying elementsImpurities a AsBiCaCdCuSbSnTePbAgAsBiCdCuNiSbSnTeZn PB001K001Kmin.-0,80-Rem- max.-0,95-0,0050,0050,050,0010,0030,001-0,010,0020,0005 PB002K002Kmin.-0,50-Rem- max.-0,60-0,0050,0050,050,0010,0030,001-0,0050,
47、0020,0005 PB011K011Kmin.-0,14-0,35-Rem- max.-0,16-0,45-0,00250,0010,015-0,0030,00050,003-0,0020,0005 PB012K012Kmin.-0,06-0,17-Rem- max.-0,09-0,23-0,00250,0010,015-0,0030,00050,003-0,0020,0005 PB021K021Kmin.-0,150,35-Rem- max.-0,250,45-0,0050,0010,030,0010,0030,001-0,0020,0005 PB022K022Kmin.-0,060,35
48、-Rem- max.-0,100,45-0,0050,0010,030,0010,0030,001-0,0020,0005 PB023K023Kmin.-0,080,17-Rem- max.-0,120,23-0,0050,0010,030,0010,0030,001-0,0020,0005 PB031K031Kmin.0,150,08-0,10-Rem- max.0,180,12-0,13-0,0025-0,00050,0030,00050,003-0,0020,0005 PB032K032Kmin.0,070,04-0,05-Rem- max.0,090,06-0,07-0,0025-0,00050,0030,00050,003-0,0020,0005 PB041K041Kmin.-0,030-0,035Rem- max.-0,045-0,0450,0050,0010,030,001-0,00100,0010,02-0,0005 PB042K042Kmin.-0,014-0,014Rem- max.-0,020-0,0200,00250,0010,0150,001-0,00050,0010,02-0,0005 PB043K043Kmin.-0,006-0,006Rem- max.-0,009-0,0090,00250,0010,0150,001-0,00050,001