《ISO-TR-12603-1996.pdf》由会员分享，可在线阅读，更多相关《ISO-TR-12603-1996.pdf（12页珍藏版）》请在三一文库上搜索。
1、TECHNICAL REPORT IS0 TR 12603 First edition 1996-04-o 1 Building construction machinery and equipment - Classification Machines et matkiels pour la construction des bdtiments - Classification Reference number lSO/TR 12603:1996(E) Copyright International Organization for Standardization Provided by I
2、HS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:43:59 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO/TR 12603:1996(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of n
3、ational standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Inter
4、national organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The main task of technical committees is to prepare Intern
5、ational Stan- dards, but in exceptional circumstances a technical committee may pro- pose the publication of a Technical Report of one of the following types: - type 1, when the required support cannot be obtained for the publi- cation of an International Standard, despite repeated efforts; - type 2
6、, when the subject is still under technical development or where for any other reason there is the future but not immediate possibility of an agreement on an International Standard; - type 3, when a technical committee has collected data of a different kind from that which is normally published as a
7、n International Standard (“state of the art”, for example). Technical Reports of types 1 and 2 are subject to review within three years of publication, to decide whether they can be transformed into Inter- national Standards. Technical Reports of type 3 do not necessarily have to be reviewed until t
8、he data they provide are considered to be no longer valid or useful. lSO/TR 12603, which is a Technical Report of type 2, was prepared by Technical Committee lSO/TC 195, Building construction machinery and equipment. This document is being issued in the Technical Report (type 2) series of publicatio
9、ns (according to subclause G.3.2.2 of part 1 of the ISO/IEC Di- rectives, 1995) as a “prospective standard for provisional application” in the field of building construction machinery and equipment because there is an urgent need for guidance on how standards in this field should be used to meet an
10、identified need. 0 IS0 1996 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organiza
11、tion for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:43:59 MDTNo reproduction o
12、r networking permitted without license from IHS -,-,- ISO/TR 12603:1996(E) This document is not to be regarded as an “International Standard”. It is proposed for provisional application so that information and experience of its use in practice may be gathered. Comments on the content of this documen
13、t should be sent to the IS0 Central Secretariat. A review of this Technical Report (type 2) will be carried out not later than three years after its publication with the options of: extension for another three years; conversion into an International Standard; or withdrawal. Annex A of this Technical
14、 Report is for information only. . III Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:43:59 MDTNo reproduction or networking permitted without license from IHS -,-,- TECHNICA
15、L REPORT 0 IS0 ISO/TR 12603:1996(E) Building construction machinery and equipment - Classification 1 Scope This Technical Report specifies a classification of machines and equipment used in the building and construction field. This field is divided into seven classes of traditional and specified use
16、 and the different machines are classrfied accordingly. As far as possible, the sub-classes of the machines and equipment comply with both pub- lished and draft European and International Standards. Additionally, the classification tables show the IS0 and CEN Technical Committees and Working Groups
17、respon- sible for the International and European Standards related to each class. Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:43:59 MDTNo reproduction or networking permit
18、ted without license from IHS -,-,- ISO/TR 12603:1996(E) 2 Classification 2 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:43:59 MDTNo reproduction or networking permitted wit
19、hout license from IHS -,-,- 0 IS0 lSO/TR 12603:1996(E) Foundation engineering and soil 2 compaction machinery and IS0 Technical International CEN Technical European equipment Committee Standard Committee Standard 2.1 Piling and extracting equipment TC 195 TC 151/WG 2 prEN 996 2.1 .I Pile drivers (ra
20、mmers) 2.1.2 Extracting equipment 2.1.3 Sounding equipment 2.2 Drilling and boring equipment TC 195 TC 151/WG 2 TC 127) TC 151/WG 3 2.2.1 Drill rigs TC 151/WG 3 EN 791 2.2.2 Soil drill rigs TC 151/WG 3 2.2.3 Diaphragm wall cutters 1 TC151/WG2 1 2.3 Rollers TC 127 TC 151/WG 5 prEN 500 2.3.1 Smooth dr
21、um rollers 2.3.2 Pneumatic tyred rollers 2.3.3 Combination rollers 2.4 Compactors I TC 127 I ) TC151/WG 1 1 prEN 474-l 1 2.4.1 Rammers, compactors and vi- brating tampers I TC 151/WG 5 EN 500-4 2.4.2 Vibrating plate compactors 2.5 Others 1) Horizontal drilling and boring equipment. TC 151/WG 5 TC 15
22、1/WG 5 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:43:59 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO/TR 12603:1996(E) 0 IS0 Machinery and
23、 equipment for 3 manufacturing, transporting and IS0 Technical International processing concrete and mortar and Committee Standard for reinforcement and formwork CEN Technical Committee European Standard 3.1 Equipment for storage of materials 1 TC 195 I 1 TC 148/WG 4 1 1 3.2 Batching and mixing equi
24、pment TC 195 TC 151/WG 8 3.2.1 Concrete mixers 3.2.2 Mortar mixers 3.3 Transporting equipment (including TC 195 pumps) 3.3.1 Concrete pumps TC 195 TC 151/WG 8) 3.3.2 Mortar pumps TC 195 3.3.3 Conveyors TC 101 TC 148 Belts TC 188 3.3.4 Elevators I TC 101 I I 3.4 Spreading and grouting equipment ! TC
25、195 I 3.4.1 Concrete spraying machines 3.4.2 Injection equipment 3.5 Compaction and finishing equipment 1 TC 195 I I I I 3.5.1 Concrete compactors I I I I I 3.5.2 Finishing coat machines 1 TC151/WG8 1 I 3.6 Formworks and moulds TC 195 3.7 Machinery and equipment for re- TC 195 TC 151/WG 8 inforcemen
26、t work 3.7.1 Steel bar bending/cutting ma- chines I I I I 3.7.2 Steel mesh bending/cutting ma- chines I I I I 3.8 Prestressing equipment TC 195 TC 151/WG 10 I 3.9 Demolition equipment I TC 195 I 1 TC 151/WG 14 1 I 3.10 Equipment for removing and recycling concrete 3.11 Machines and equipment for agg
27、regate processing 3.11 .I Crushing equipment 3.11.2 Screening equipment 3.11.3 Washing equipment 3.11.4 Conveying equipment 3.11.5 Others 3.12 Others I) Pumps TC 195 TC 151/WG 9 TC151/WG 14 TC 195 TC 195 Copyright International Organization for Standardization Provided by IHS under license with ISO
28、Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:43:59 MDTNo reproduction or networking permitted without license from IHS -,-,- 0 IS0 ISO/TR 12603:1996(E) 4.9 Mobile and hanging scaffolds, cradles TC 195 TC 53 4.10 Mobile elevating work platforms TC 195 TC 98 4.11 Liftin
29、g access platforms TC 178 TC 98 4.12 Others Specialized machinery and 5 equipment used in building construction 5.1 Machinery and equipment for pave- ment construction and restoration 5.1 .I Pavers 5.1.2 Slipform pavers 5.1.3 Planers 5.1.4 Pavement recyclers 5.2 Pipe-laying and pipe-jacking (pushing
30、) machinery 5.3 Others I I I IS0 Technical International CEN Technical European Committee Standard Committee Standard TC 151/WG 5 I 5 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2
31、007 20:43:59 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO/TR 12603:1996(E) Q IS0 i6 Equipment for installation, finishing work and maintenance 6.1 Roof covering equipment 6.2 Insulation equipment 6.3 Plastering and wall-covering equipment 6.4 Flooring equipment 6.5 P
32、ainting equipment 6.6 Equipment for sanitary, electrical, gas and air-conditioning installations 6.6.1 Equipment for sanitary instal- l lations 6.6.2 Equipment for electrical instal- lations 6.6.3 Equipment for gas installations 6.6.4 Equipment for air-conditioning installations 6.7 Equipment for fi
33、xing and connecting 6.8 Cleaning equipment 1 6.9 Others IS0 Technical Committee TC 195 TC 195 TC 195 TC 195 TC 195 TC 195 TC 195 TC 195 International I CEN Technical I European Standard Committee Standard TC 128 General-use machinery and 7 equipment used in construction processes 7.1 Machinery and e
34、quipment for energy generation, conversion and trans- mission 7.1 .I Electricity 7.1.2 Heat 7.1.3 Compressed air TC 118 TC 232 EN1012 7.2 Electric, non-electric, pneumatic and hydraulic tools I I I I 7.2.1 Electric tools IEC TC 61 TC 44 X IECTC78 7.2.2 Internal combustion engines TC 70 7.2.3 Pneumat
35、ic tools TC 118/SC 3 TC 255 EN792 7.2.4 Hydraulic tools TC 255 EN792 7.3 Equipment for welding and other join- TC 44/SC4 TC 121/SC7 ing processes TC 441SC8 7.4 Pumps TC 115 TC 197 7.5 Measuring and inspection devices 7.6 Others Copyright International Organization for Standardization Provided by IHS
36、 under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/23/2007 20:43:59 MDTNo reproduction or networking permitted without license from IHS -,-,- Q IS0 Annex A (informative) Bibliography ISO/TR 12603:1996(E) I IS0 4301-l :1986, Cranes and lifting appliances - Class
37、ification - Part 1: General. 2 IS0 4301-2: 1985, Lifting appliances - Classi- fication - Part 2: Mobile cranes. 3 IS0 4306-I :1990, Cranes - Vocabulary - fart 1: General. 4 IS0 6165:-l, Earth-moving machinery - Basic types - Vocabulary. S IS0 6747:1988, Earth-moving machinery - Tractors - Terminolog
38、y and commercial speci- fications. 6 IS0 7131 :-J, Earth-moving machinery - Load- ers - Terminology and commercial specifi- cations. 7 IS0 7132: 1990, Earth-moving machinery - Dumpers - Terminology and commercial specifications. 8 IS0 7133: 1994, Earth-moving machinery - Tractor-scrapers - Terminolo
39、gy and commercial specifications. 9 IS0 7134:1993, Earth-moving machinery - Graders - Terminology and commercial speci- fications. I 0 IS0 7135:1993, Earth-moving machinery - Hy- draulic excavators - Terminology and commer- cial specifications. I I IS0 8812:-3, Earth-moving machinery - Backhoe loade
40、rs - Terminology and commer- cial specifications. I 21 prEN 474-l :I 992, Earth-moving machinery - General requirements. I33 EN 474-2, Earth-moving machinery - Safety - Part 2: Requirements for tractor- dozers. 141 EN 474-3, Earth-moving machinery - Safety - Part 3: Requirements for loaders. 15 EN 4
41、74-4, Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders, I 6) prEN 474-5, Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators. 17 prEN 474-6, Earth-moving machinery - Safety - Part 6: Requirements for dumpers and site carriers. 18 prEN 474-7, Eart
42、h-moving machinery - Safety - Part 7: Requirements for tractor scrapers. 19 prEN 474-8, Earth-moving machinery - Safety - Part 8: Requirements for graders. 20 prEN 474-9, Earth-moving machinery - Safety - Part 9: Requirements for pipelayers. 21 prEN 474-10, farth-moving machinery - Safety - Part 10:
43、 Requirements for trenchers. 22 prEN 474-l 1, Earth-moving machinery - Safety - Part II: Requirements for landfill compactors. 23 prEN 500-1, Mobile road construction machines - Safety - Part 1: General require- ments. 24 prEN 500-2, Mobile road construction machines - Safety - Part 2: Specific requ
44、ire- ments for road-milling machines. 1) To be published. (Revision of IS0 6165:1987) 2) To be published. (Revision of IS0 7131:1984) 3) To be published. Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not
45、 for Resale, 04/23/2007 20:43:59 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO/TR 12603:1996(E). 0 IS0 25 prEN 500-3, Mobile road construction machines - Safety - Part 3: Specific require- ments for soil stabilization machines. 26 EN 500-4, Mabile road construction ma
46、chines - Safety - Part 4: Specific require- ments for compaction machines. 27 prEN 500-5, Mobile road construction machines - Safety - Part 5: Specific require- ments for joint cutters. 28 prEN 500-6, Mobile road cons true tion machines - Safety - Part 6: Specific require- ments for paver-finishers.
47、 29 EN 791, Drill rigs - Safety. 30 EN 792-1, Handheld non-electric power tools - Safety requirements - Part 7: Genera/ safety requirements for all types of handheld non-electrical power tools. 31 EN 792-2, Handheld non-electric power tools - Safety requirements - Part.? Safety requirements related
48、to the energy supply of power tools. 32 prEN 792-3, Handheld non-electric power tools - Safety requirements - Part3: Rotary drilling tools, drills, requirements. 33 prEN 792-4, Handheld non-electric power tools - Safety requirements - Part4: Percussive non-rotary power tools. 34 prEN 792-5, Handheld nonelectric power tools - Safety requirements - Part 5: Rotary percussive drills. 35 prEN 792-6, Handheld non-electric power tools - Safety requirements - Pa