《Pro ENGINEER Wildfire 5.0 Configuration Options.pdf》由会员分享，可在线阅读，更多相关《Pro ENGINEER Wildfire 5.0 Configuration Options.pdf（158页珍藏版）》请在三一文库上搜索。
1、 Pro/ENGINEER Wildfire 5.0 Configuration Options October 2009 Parametric Technology Corporation Copyright 2009 Parametric Technology Corporation and/or Its Subsidiary Companies. All Rights Reserved. User and training guides and related documentation from Parametric Technology Corporation and its sub
2、sidiary companies (collectively “PTC“) are subject to the copyright laws of the United States and other countries and are provided under a license agreement that restricts copying, disclosure, and use of such documentation. PTC hereby grants to the licensed software user the right to make copies in
3、printed form of this documentation if provided on software media, but only for internal/personal use and in accordance with the license agreement under which the applicable software is licensed. Any copy made shall include the PTC copyright notice and any other proprietary notice provided by PTC. Tr
4、aining materials may not be copied without the express written consent of PTC. This documentation may not be disclosed, transferred, modified, or reduced to any form, including electronic media, or transmitted or made publicly available by any means without the prior written consent of PTC and no au
5、thorization is granted to make copies for such purposes. Information described herein is furnished for general information only, is subject to change without notice, and should not be construed as a warranty or commitment by PTC. PTC assumes no responsibility or liability for any errors or inaccurac
6、ies that may appear in this document. The software described in this document is provided under written license agreement, contains valuable trade secrets and proprietary information, and is protected by the copyright laws of the United States and other countries. It may not be copied or distributed
7、 in any form or medium, disclosed to third parties, or used in any manner not provided for in the software licenses agreement except with written prior approval from PTC. UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND CRIMINAL PROSECUTION. PTC regards software pira
8、cy as the crime it is, and we view offenders accordingly. We do not tolerate the piracy of PTC software products, and we pursue (both civilly and criminally) those who do so using all legal means available, including public and private surveillance resources. As part of these efforts, PTC uses data
9、monitoring and scouring technologies to obtain and transmit data on users of illegal copies of our software. This data collection is not performed on users of legally licensed software from PTC and its authorized distributors. If you are using an illegal copy of our software and do not consent to th
10、e collection and transmission of such data (including to the United States), cease using the illegal version, and contact PTC to obtain a legally licensed copy. For Important Copyright, Trademark, Patent, Licensing and Data Collection Information: For Windchill products, select About Windchill at th
11、e bottom of the product page. For InterComm products, on the Help main page, click the link for Copyright 20xx. For other products, click Help About on the main menu for the product. UNITED STATES GOVERNMENT RESTRICTED RIGHTS LEGEND This document and the software described herein are Commercial Comp
12、uter Documentation and Software, pursuant to FAR 12.212(a)-(b) (OCT95) or DFARS 227.7202-1(a) and 227.7202-3(a) (JUN95), and are provided to the US Government under a limited commercial license only. For procurements predating the above clauses, use, duplication, or disclosure by the Government is s
13、ubject to the restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252.227-7013 (OCT88) or Commercial Computer Software-Restricted Rights at FAR 52.227-19(c)(1)-(2) (JUN87), as applicable. 01162009 Parametric Technology Corporation,
14、140 Kendrick Street, Needham, MA 02494 USA Parametric Technology Corporation iii Pro/ENGINEER Wildfire 5.0 Configuration Options Table of Contents Pro/ENGINEER Wildfire 5.0 Configuration Options 1 Pro/ENGINEER Wildfire 4.0 to 5.0 Configuration Options Changes 127 Pro/ENGINEER Wildfire 5.0 Configurat
15、ion Options NameCategoryDescriptionValuesDefault value accessory_window_displayWithout categoryDocked - Displays the accessory window embedded in the active window. Undocked - Displays the accessory window as a standalone window. undocked, dockeddocked accuracy_lower_boundEnvironmentEnter an accurac
16、y value to override the default lower limit.The minimum value for relative accuracy is 1E- 06. 0.0001 acis_export_paramsData ExchangeFor ACIS interface allows to export object, feature and entity level parameters. yes, nono acis_export_unitsData ExchangeAllows selection of model units for ACIS expor
17、t. in, ft, m, mm, cm, micron, default default acis_out_versionWithout categoryAllows the user to choose ACIS export version. 4, 55 acrobat_readerPrinting on Windows NT. add_lower_level_comps_to_layer LayersSetting this option to yes will check off the Favor Current Layer option, which allows lower l
18、evel components to be added to top level layers. yes, nono add_weld_mpWeldYes - System includes welds when calculating mass properties and approximates light weight weld mass properties. No - System excludes welds when calculating mass properties. yes, nono advanced_intersectionAssemblyControl the a
19、ppearance of the intersection tool and scope of available functionalities. yes, nono advanced_style_surface_editWithout categoryUse advanced options by default for Surface Edit in Style. yes, nono Parametric Technology CorporationPro/ENGINEER Wildfire 5.0 Configuration Options1 WWW.CNCREO.COM NameCa
20、tegoryDescriptionValuesDefault value ae_propagate_detail_dependency User InterfaceSets the AE detail dependency for AEs that are locally propagated. If set to independent, the AEs parameter call outs will update to other propagated AEs parameters. dependent, independentdependent aec_dwg_anno_attrpar
21、_spec_file PipingSpecifies the aec drawing annotation attribute/parameter specification file name. aec_dwg_anno_attrpara m_spec.ptd aec_object_type_filePipingSpecifies the aec object type file name. aec_object_type.ptd aec_parameter_fileWithout categorySpecifies the file name of the user defined pip
22、ing parameter codes. af_copy_references_flagUser InterfaceToggle display of Copy References column in Annotation Feature definition dialog no, yesno align_cable_bundlesElectromechanical Align NEWLY CREATED bundles where they meet or branch out yes, noyes allow_anatomic_featuresFeaturesAllow the crea
23、tion of pre-Pro/E 2000i geometry features including ear, neck, lip, slot, flange, shaft, local push, radius dome and section dome. yes, nono allow_confirm_windowUser InterfaceDisplay a confirmation window when exiting Pro/ENGINEER. This enables you to use the mouse to confirm/cancel exiting Pro/ENGI
24、NEER. yes, noyes allow_delete_many_in_drawingsWithout categoryMake the Delete Many command available in yes, nonoallow_delete_many_in_drawingsWithout categoryMake the Delete Many command available in drawing mode. The Delete Many command is not supported by undo but can improve performance when dele
25、ting a significant number of items. yes, nono allow_float_opt_checkoutSystemYes - Allows checkout failure for floating modules. no, yesno allow_fully_dependent_copyFeaturesEnables the usage of advanced copy/paste functionality tocontrol degree of dependency on the pasted object. yes, noyes allow_har
26、n_mfg_assy_retrievalElectromechanical Allow to retrieve a harness mfg assembly directly. yes, nono allow_import_file_extensionData Management Allow additonal files with extensions to be shown in the import dialog allow_move_attach_in_dtl_moveDrawingYes - Move and Move Attach commands in drawing mode
27、 act together. No - Move and Move Attach commands in drawing mode do not act together. yes, noyes Parametric Technology CorporationPro/ENGINEER Wildfire 5.0 Configuration Options2 WWW.CNCREO.COM NameCategoryDescriptionValuesDefault value allow_move_view_with_moveDrawingDisallow the movement of drawi
28、ng views with the mouse. yes, nono allow_package_childrenAssemblySets what type of children packaged components can have. ALL - Features and components can be a children of packaged component. FEAT - Only features can be children of packaged components. NONE - Packaged components cannot have childre
29、n. all, feat, noneall allow_ply_cross_sectionMiscellaneousYes - Enables Pro/COMPOSITE to create a cross- section of composite plys. yes, noyes allow_redo_intersectionsAssemblyYes - Displays the ReIntersect command in the ASSY FEAT menu. yes, nono allow_ref_scope_changeWithout categoryNo - Displays t
30、he message “Reference scope changes are prohibited by the configuration file settings“ when the Ref Scope user interface is changed. yes, noyes allow_refs_to_geom_reps_in_drw s DrawingYes - Allows you to create drawing references to geometry representations (includes dimensions, notes, and leaders).
31、 These references may become invalid if the referenced geometry changes resulting in geometry representations not updating in drawings. yes, nono g allow_rfs_default_gtols_alwaysDimensions YES - both workpiece and reference part are allowed; AUTO - only workpiece is allowed. yes, no, autono analysis
32、_crt_tmp_file_on_regenFile Storage No - z- extension lines will not be displayed. yes, noyes dm_auto_open_zipData Management YES - Windchill CAD packages or zip files will open automatically. NO - User selects which file in contents to open. yes, noyes Parametric Technology CorporationPro/ENGINEER W
33、ildfire 5.0 Configuration Options24 WWW.CNCREO.COM NameCategoryDescriptionValuesDefault value dm_cache_limitData Management Enter amount of disk space (in megabytes) to allocate for local file storage. The change to the existing setting will take effect after Pro/ENGINEER is restarted dm_cache_modeD
34、ata Management Indicate which objects will be written to local cache when objects in Pro/E memory are saved. none, modified, allall dm_checkout_on_the_flyData Management Controls the default action presented to the user when Check Out on the fly dialog comes up checkout, continuecheckout dm_enable_i
35、mport_export_uiWithout category yes, nono dm_enable_simple_import_expor t Without category yes, noyes dm_fallback_server_locationData Management Specifies the server location where objects will be saved when Pro/ENGINEER does not provide an ability to specify the target save location. This option is
36、 applicable for Windchill ProductPoint only. dm_http_compression_levelData Management Set the data compression factor (0-9, 0= no compression) for data exchange with a Windchill server. dm_nc_referencesWithout categorySets whether reference relationships will be created in Windchill between the manu
37、facturing model and its deliverables(CL file, tape file and DMIS file). yes, noyes dm_offline_after_eventData Management Allow the user to choose to work offline when there is a loss of server connection. Staying online will continue to retry server operations. yes, noyes dm_offline_options_activate
38、dData Management Yes - Synchronize, Download and Upload boxes are checked when going online. No - Only Synchronize box is checked when going online. yes, noyes Parametric Technology CorporationPro/ENGINEER Wildfire 5.0 Configuration Options25 WWW.CNCREO.COM NameCategoryDescriptionValuesDefault value
39、 dm_overwrite_contents_on_updat e Data Management Yes: Windchill Workspace Update will overwrite locally/modified out of date objects with the ones in the server. No (Default): Windchill Workspace Update will update metadata only. yes, nono dm_remember_serverData Management Primary server/workspace
40、must be set by user for each Pro/E session. no, yesyes dm_save_as_attachmentData Management Controls the default option for Save A Copy when models are saved as in non-Pro/E format. Yes - It will by default save it as secondary content attachment to the original CAD Document. No- It will by default
41、save it as Primary CAD Document yes, no dm_search_primary_serverData Management Search the primary server for dependencies not found in the workspace. yes, noyes dm_secondary_uploadData Management Indicate when modified Pro/E objects on a secondary server will be moved from the local cache to the us
42、ers workspace on the server. automatic, explicitautomatic dm_synchronize_in_backgroundData Management Yes: Enables workspace synchronization in the background. No (Default): Workspace synchronization will happen in the foreground. yes, nono synchronization will happen in the foreground. dm_upload_ob
43、jectsData Management Indicate when modified Pro/E objects will be moved from the local cache to the user workspace on the server. automatic, explicitexplicit dm_user_presenceData Management Enable user presence indicator and actions.This capability requires a connection with a PDM server and require
44、s an installed and running Microsoft communicator client. yes, noyes dont_show_symbol_nodesDesign ManagerDo not show references derived from relations in Parent/Child viewer. yes, nono Parametric Technology CorporationPro/ENGINEER Wildfire 5.0 Configuration Options26 WWW.CNCREO.COM NameCategoryDescr
45、iptionValuesDefault value draw_models_read_onlyDrawingYes - Drawing model files are read-only.No model changes can be made.Cosmetic_only - Only cosmetic changes can be made to the model.Design changes are not allowed.Cosmetic changes include adding driven dimensions, cross sections, and explode stat
46、es. yes, no, cosmetic_onlyno draw_points_in_model_unitsDrawingDefines the current draft views coordinate values as model units rather than drawing units. The GET POINT menu uses the scale of the draft view and the draft views model units for relative and absolute coordinate entry and display in the
47、Message Window. yes, nono drawing_ole_image_dpiDrawingResolution of OLE object images. The range of valid values is 0 to 600 dots per inch. 150 drawing_setup_fileDrawingSets the default drawing setup file option values for your Pro/ENGINEER session, otherwise, the system uses the default drawing set
48、up file option values. Certain parameters in the file are valid only if you have a license for Pro/DETAIL. /text/prodetail.dtl dih d did iDiRl tift d h d d diiTh150drawing_shaded_view_dpiDrawingResolution of exported shaded drawing views.The range of valid values is 0 to 600 dots per inch. 150 drawi
49、ng_view_origin_csysDrawingThe named coordinate system will be used as the origin of a newly created view or of a modified view.None - The system will not use a previously specified coordinate system. none drm_policy_serverUser InterfaceAllows a user to preset the server policy that is to be used when Apply Policy command is utilized. dwg_export_formatData ExchangeProvides the ability to choose DWG file version when exporting from Pro/E drawing. 14,