《51单片机按键控制数码管程序.doc》由会员分享，可在线阅读，更多相关《51单片机按键控制数码管程序.doc（2页珍藏版）》请在三一文库上搜索。
1、#include#define uint unsigned int#define uchar unsigned char uchar c;sbit p10=P10;sbit p11=P11;sbit p12=P12;sbit p13=P13;sbit p14=P14;sbit p15=P15;sbit p16=P16;sbit p17=P17;void delay(uint z);int b=0,1,2,3,4,5,6,7;/设置每一位显示的数字unsigned char code Tab=0xc0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8, 0x80,0x90,0
2、x88,0x83,0xC6,0xA1,0x86,0x8E;/共阳极数码管int a=0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80;void main() EA=1;EX0=1;IT0=1;P1=0xff; while(1) for(c=0;c0;a-) for(b=110;b0;b-);int_0()interrupt 0EA=0;if(p10=0) b0=(b0+1)%10;if(p11=0) b1=(b1+1)%10;if(p12=0) b2=(b2+1)%10;if(p13=0) b3=(b3+1)%10;if(p14=0) b4=(b4+1)%10;if(p15=0) b5=(b5+1)%10;if(p16=0) b6=(b6+1)%10;if(p17=0) b7=(b7+1)%10;EA=1;