《iDirect NMS iBuilder Module -v2_PPT.pdf》由会员分享，可在线阅读，更多相关《iDirect NMS iBuilder Module -v2_PPT.pdf（14页珍藏版）》请在三一文库上搜索。
1、NMSNMS iBuilderiBuilder Network Network Management Management System (NMS)System (NMS) iBuilderiBuilder 2 Copyright NoticeCopyright NoticeCopyright NoticeCopyright Notice iDirect Technologies Technical Training Manual Copyright 2002; 2004 - 2006, iDirect, Inc. All rights reserved. This training mate
2、rial may not be reproduced, in part or in whole, without the permission of iDirect, Inc. All other brands or product names are trademarks or registered trademarks of their respective holders. Printed in the USA. No part of this work covered by copyright may be reproduced in any form. Reproduction, a
3、daptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. This publication is provided by iDirect Technologies as-is without warranty of any kind, either express or implied, including, but not limited to, the implied warranties or condition
4、s of merchantability or fitness for a particular purpose. iDirect Technologies shall not be liable for any errors or omissions which may occur in this publication, nor for incidental or consequential damages of any kind resulting from the furnishing, performance, or use of this publication. Informat
5、ion published here is current or planned as of the date of publication of this document. Because we are improving and adding features to our products continuously, the information in this document is subject to change without notice. 3 NMS Features iSite Site Installation Tools Direct Connection to
6、a Modem GUI Client for iSCPC and Network Accelerator iMonitor Async Reporting of Events, Alarms, Warnings Real-time and Historical Network Data Access “Network Probe” for Detailed Investigation Remote Continuous Wave (CW) carrier from Probe iBuilder Configuration and Control Creates Network Componen
7、ts Controls Operational Parameters 4 NMS Architecture Real-time Network Data Configuration, Firmware Updates NetModem Networks NetModemNetModem NetworksNetworks Linux BackLinux Back- -EndEnd Config Database Real-time Archive Server Suite Archive Consolidation Monitor, Report Remote User iMonitor Mon
8、itor and Control NOC Station iBuilder iMonitor Control iBuilder NOC Station 5 NMS Client-Server Architecture API Code Client (GUI, utility, or another server) Requests, Responses Database read/write Server Logic API Code DB Interface network I/F networks 6 iDS v 7.0 Network TopologiesiDS v 7.0 Netwo
9、rk Topologies NMS Three Network Topologies Rx SCPC Downstream Remote 1 Tx S Remote 3 Remote 2 TDMA Upstreams Star networks, SCPC to TDMA Mesh networks, TDMA to TDMA iSCPC networks, SCPC to SCPC Upstream Subnet Protocol Processor Upstream Router NMS Server Tunnel Subnet Internet Mesh Links Remote Use
10、r iMonitor NOC Station iBuilder iMonitor iSCPC iSCPC Remote iSCPC Remote iSCPC Downstream iSCPC Upstream S iSCPC Downstream iSCPC Upstream iSCPC link (remote-to-remote or remote-to-HLC) 7 NMS Client Software Installation Loading iDS Client Software Components Download the latest nms_clients.zip from
11、 TAC webpage (version dependent) PC System Requirements Windows NT, Windows 2000 or Windows XP Windows 2000 Must have Service Pack 3 Windows 98/95 are Not Supported NMS Client Load Software Uncompress Files (Using WinZip, Pkzip, etc.) Includes EDAS.zip file for addressing chassis EDAS board (unzip a
12、nd launch EDAS SysCheck 3.0) Run NMS Clients Setup.exe to Install NMS Clients (GUI) ?Creates Desktop Folder ?Folder Contains Shortcut Icons for the Installed GUI Version 8 NMS iBuilder Client Software Login (Enlarged for viewing) Operator Login Information admin/admin (initial default) select Server
13、; enter IP address 9 Accept/View Changes “Accept Changes” Icon Turns Red When Changes Have Been Made By a Second Operator, via iBuilder Since Last Login Click on This Red Icon to Open “Accept Changes” Dialog Box Agree to “Accept Changes” to Refresh iBuilder Display Only “Accepting Changes” does not
14、confirm agreement or authorize changes View current changes via “View ? Configuration Changes” window Without Accepting, Operator Display is Stale and potentially inaccurate Closing and re-opening iBuilder will refresh display and accept changes Main Toolbar “Tool” “View” Configuration Changes No Pe
15、nding Changes Accept Changes 10 iBuilder Main Screen Tool Bar Min, Max, Close Open Window Workspace Status Bar Window Banner Menu Bar Component Legend” Opens Status Legend for Reference 4. “View; Configuration Changes” Opens Table for Viewing 5. “View; Details” Opens Configuration Detail for Referen
16、ce 3 2 1 13 Configuration State Configure DEACTIVATED Create New Remote (via iBuilder) INCOMPLETE NOMINAL NEVER APPLIED Activation (Initial) Deactivate Activate CHANGES PENDING Change Configuration Apply Configuration & Reset Configuration Does NOT Match Confirms Configuration with NMS (after every Network Acquisition) Configuration Match Commission Remote NMSNMS iBuilderiBuilder iDSiDS v7.0 v7.0 December 2006December 2006 Network Network Management Management System (NMS)System (NMS) iBuilderiBuilder Thanks, . . .Thanks, . . . Questions? . . .Questions? . . .