《SAE螺纹标准.docx》由会员分享,可在线阅读,更多相关《SAE螺纹标准.docx(2页珍藏版)》请在三一文库上搜索。
1、SAE STRAIGHT THREAD PORT DIMENSIONS SAE information is provided as an aid to designers. For com-plete specifi cations refer to SAE Standards J1926 for straight thread ports and J518 JUN93 for 4-Bolt fl ange ports.FOR BEST RESULTS USE A FORM TOOL TO MACHINE CAVITYNOMINALCFSIZETUBETHREADAB*+.015DE+.00
2、5GHCODESIZESIZEMINMIN.000MINMAX.000MIN1 21/85/16-24.062.390.074.468.062.358.67212 33/163/8-24.125.390.074.468.062.421.75012 41/47/16-20.172.454.093.547.062.487.82812 55/161/2-20.234.454.093.547.062.550.90612 63/89/16-18.297.500.097.609.062.616.96912 81/23/4-16.391.562.100.688.094.8111.18815 105/87/8
3、-14.484.656.100.781.094.9421.34415 123/41 1/16-12.609.750.130.906.0941.1481.62515 147/81 3/16-12.719.750.130.906.0941.2731.76515 1611 5/16-12.844.750.130.906.1251.3981.91015 201 1/41 5/8-121.078.750.132.906.1251.7132.27015 241 1/21 7/8-121.312.750.132.906.1251.9622.56015 3222 1/2-121.781.750.132.906
4、.1252.5873.48015 40 *2 1/23-122.344.750.1321.250.0943.0883.87515 48 *33 1/2-122.844.750.1321.250.0943.5884.43815*REQUIRES USING A BOTTOM TAP*NOT AN SAE STANDARD. INSER TATM PRODUCTS, I STANDARD.SAE STRAIGHTBlue Bell, Pa. 19422THREAD PORTDIMENSIONS 2002 ADACONN + INSERTA All rights reserved. Printed in USA /