《NCR18650B规格书.pdf》由会员分享，可在线阅读，更多相关《NCR18650B规格书.pdf（16页珍藏版）》请在三一文库上搜索。
1、 Contents Page 1. Publication Record 1 2. Safety Instructions 2-5 3. Extent of the Application 6 4. Battery Classification and Type 6 5. Nominal Specifications 6 6. Electrical Characteristics 7-8 7. Design and Dimensions 8 8. Appearance 8 9. Shipping Charge 8 10. Precautions on Designing of Note PC,
2、 9-10 the Charger and the Battery Pack 11. Storing Conditions 11 12. Handing Precautions for Lithium Ion Cells 11 13. Warranty Exemptions 12 14. Other Remarks 12 15. Standard Charging Method 12 16. Battery Warranty Period 13 17. Battery Safety Requirements 13 18. Document Terms 13 (Only Tentative Sp
3、ecification) Title Specifications of Lithium Ion battery (Cylindrical Type) page 2/13 2. Safety Instructions Prohibited Actions The cell contains flammable objects such as organic solvents. If the battery is mishandled, it may cause fire, smoke or an explosion and the batterys functionality will be
4、seriously damaged. Please read and check the following prohibited actions. Also, please equip a protection in the application so the application troubles dont affect the battery. Additionally, SANYO highly recommends embedding these instructions into the owners manual. ！ ? Immersion Do not immerse t
5、he battery with liquid such as water, sea water or soda. If the protection circuit in the battery is broken with liquid, the battery cannot be protected and may on fire, smoke, explode, or cause heat generation. by unexpected electrical load. ? High Temperature Do not use or place the battery near f
6、ire, a heater or a high temperatures (more than 80). The batterys polyolefin separator may get damaged from the heat and could cause an internal short circuit. This may cause the battery to catch on fire, smoke, explode, or cause heat generation. ? Charger and Charge Condition Do not use unauthorize
7、d chargers. If the battery is charged under unacceptable conditions (For example: usage in restricted temperature ranges, over voltage, or over current with unauthorized chargers) the battery may catch on fire, smoke, explode, or cause heat generation. ? Reverse Polarity Do not force a reverse-charg
8、e or a reverse-connection. The battery has correct polarity. If the battery doesnt fit, please check the batterys orientation and do not force into the battery mount. If the battery is forced to set with a different polarity, the battery may catch on fire, smoke, explode, or cause heat generation. ?
9、 Direct Connection Do not connect the battery with AC plug (outlet) or car plugs. The battery requires a specific charger. If the battery connects with the outlet directly, the battery may catch on fire, smoke, explode, or cause heat generation. File No NCR18650-055 Energy Company, SANYO Electric Co
10、., Ltd. Lithium-Ion Battery Business Unit Battery System Management Department Title Specifications of Lithium Ion battery (Cylindrical Type) page 3/13 ? Inappropriate Use with Other Equipment Do not adapt the battery to unspecified applications. If the battery is used for unspecified applications o
11、r systems, the battery may get damaged or catch on fire, smoke, explode, or cause heat generation. ? Incineration and Heat Please keep the battery away from heat and fire The battery materials will get damaged and may catch on fire, smoke, explode, or cause heat generation. ? Short-Circuit Do not ma
12、ke a short-circuit. Do not connect the + and - terminals with conductive material. Do not carry or store the battery with metal objects (such as wire, necklace or hairpins). If the battery is in a short-circuit, excessive large current will flow and may catch on fire, smoke, explode, or cause heat g
13、eneration. ? Impact Avoid unnecessary impact to the battery Unnecessary impact may cause the battery to leak, heat generation, smoke, fire or explode. Also, the protection circuit may break and that will lose the function of the batterys protection system. ? Penetration Do not penetrate with a nail
14、or strike with a hammer The battery cell may get destroyed or damaged. And the batterys protection circuit may get damaged and case an internal short-circuit. Additionally, the battery may catch on fire, smoke, explode, or cause heat generation. ? Soldering Do not directly solder the battery The ins
15、ulator could melt or the gas release vent might get damaged from the heat. Additionally, the battery may catch on fire, smoke, explode, or cause heat generation. ? Disassemble and Reconstruction Do not disassemble the battery If the protection circuit gets damaged, the battery will not be protected.
16、 Then, the battery may catch on fire, smoke, explode, or cause heat generation. ? Charge near High Temperatures Do not charge the battery near high temperatures If the battery is charged near high temperatures, the battery may not be able to charge due to the activation of the protection circuit. In
17、 these conditions, the protection circuit may break and the battery may catch on fire, smoke, explode, or cause heat generation. File No NCR18650-055 Energy Company, SANYO Electric Co., Ltd. Lithium-Ion Battery Business Unit Battery System Management Department Title Specifications of Lithium Ion ba
18、ttery (Cylindrical Type) page 4/13 ！ ? Ingestion Keep away from infants The battery should be kept away from infants. In case of swallowing the battery, see a doctor immediately. ? Storing Do not put the battery in the microwave or other cooking appliances The battery may on fire, smoke, explode, or
19、 cause heat generation due to heat or the electrical impact from the microwave. ? Mixed Use Do not mix the battery with other batteries. The battery should not be used with other batteries with different capacity, chemistry or manufacturer. Do not connect with other batteries or mix with other batte
20、ries. The battery may catch on fire, smoke, explode, or cause heat generation. ? Rust, Changing Color and Deformities Do not use abnormal batteries. Please stop using the battery if there are noticeable abnormalities such as abnormal smell, heat, deformities, or discoloration. The battery may have a
21、 defect and may catch fire, smoke, heat generation or explode if used continuously. ? Charging Time Stop charging if the charging process cannot be finished. If the battery can not finish the charging process within the specified time, please stop the charging process. The battery may catch on fire,
22、 smoke, explode, or cause heat generation. ? Leakage Do not use a leaking battery near flames If the battery or liquid leaking from the battery has a pungent odor, the battery should keep away from flames. The battery may ignite and explode. ? Leakage Do not touch a leaking battery If the liquid lea
23、king from the battery gets into eyes, it will cause significant damage. If the leaking liquid gets into your eyes, please flush eyes immediately with pure water. Please consult a physician immediately. If the liquid remains in the eyes it will cause significant damage. ? Transport Pack the battery t
24、ightly during transport To prevent short-circuit or damages, please tightly pack the battery into a case or a carton box. File No NCR18650-055 Energy Company, SANYO Electric Co., Ltd. Lithium-Ion Battery Business Unit Battery System Management Department Title Specifications of Lithium Ion battery (
25、Cylindrical Type) page 5/13 ！ ? Use under Direct Sunlight Do not use or leave the battery in excessive heat such as in a car in direct sunlight. The battery may catch on fire, smoke, explode, or cause heat generation. Also, it might cause a deterioration of batterys characteristics and battery life.
26、 ? Static Electricity The battery pack has a protection circuit. Do not use the battery where it generates static electricity (more than 100V) that might damage the protection circuit. If the protection circuit is broken, the battery may catch on fire, smoke, explode, or cause heat generation. ? Cha
27、rging Temperature Range Charging temperature range is regulated between 0 and 40. Do not charge the battery out of the specified temperature range. Otherwise, it may cause heat generation, leakage or a serious damage. Also, it might cause deterioration of the batterys characteristics and battery lif
28、e. ? Manual Please read the manual before usage. Please save the manual for future reference. ? Charging Method Please read the chargers manual for the charging method. ? First Time Use Please contact the supplier If the battery has unusual odor, heat generation or rusts during the first usage. ? Us
29、e by Children Parents must explain how to use the system and the battery. Please check back periodically to ensure children are using the system and the battery correctly. ? Inflammable Materials Please keep away from flammable materials during the charge and the discharge. It may catch on fire, smo
30、ke, explode, or cause heat generation. ? Leakage If electrolyte leak from the battery and adhere to the skin or clothes, immediately flush it with water. Otherwise, it may cause skin irritation. ? Insulation If lead wires or metal objects come out from the battery, please seal and insulate them comp
31、letely. Otherwise, the battery may cause a short circuit and catch on fire, smoke, explode, or cause heat generation. ? Recycle Please recycle the battery according to local rules or regulations after use. File No NCR18650-055 Energy Company, SANYO Electric Co., Ltd. Lithium-Ion Battery Business Uni
32、t Battery System Management Department Title Specifications of Lithium Ion battery (Cylindrical Type) page 6/13 3. Extent of the Application This specification is applied to SANYO Lithium Ion Battery of NCR18650B-H00HA for Notebook Type Personal Computer with Shenzhen Syren Energy Co., Ltd. For spec
33、ial applications in which quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or cause threat of personal injury such as for weapon, aircraft and aerospace equipment, aircraft electronics equipment, medical equipment (a part of class 2
34、equipment, class 3 or more equipment), or cause large-scale system troubles, explosion-proof equipment, electric vehicle, hybrid electric vehicle, and electric motor cycle (except electric power-assisted bicycle), this specification shall not be applied. 4. Battery Classification and Type 4.1 Batter
35、y Classification SANYO Lithium Ion Battery 4.2 Battery Type NCR18650B-H00HA (This model is controlled by Wassenaar Arrangement.) 5. Nominal Specifications Items Specifications Notes 5.1 Rated Capacity (Minimum) 3200mAh 0.65A discharge at 20 5.2 Nominal Capacity (Minimum) 3250mAh 0.65A discharge at 2
36、5 5.3 Nominal Capacity (Typical) 3350mAh Reference only 5.4 Nominal Voltage 3.6V 0.65A discharge 5.5 Discharging End Voltage 2.5V 5.6 Charging Current (Std.) 1.62A 5.7 Charging Voltage 4.20 0.03V 5.8 Charging Time (Std.) 4.0 hours 5.9 Continuous Discharging Current (Max.)1 4.87A 0 +40 5.10 Internal
37、Resistance less than 100m AC Impedance 1 kHz 5.11 Weight less than 48.5g Charge 0 +40 5.12 Operating Temperature Discharge -20 +60 5.13 less than 1 month-20 +50 Percentage of Storing Conditions less than 3 months-20 + 45 recoverable capacity less than 1 year -20 + 20 80%2 1 The maximum discharge cur
38、rent for a single cell use. However after the battery pack assembly , there will be a limitation of maximum discharge current due to a protection circuit or a protection device. 2 Percentage of recoverable capacity = (Discharging time after storage / Initial discharging time) 100 The discharging tim
39、e is measured by the discharge current of 0.65A until 2.5V of end voltage after the battery is fully charged at 25. File No NCR18650-055 Energy Company, SANYO Electric Co., Ltd. Lithium-Ion Battery Business Unit Battery System Management Department Title Specifications of Lithium Ion battery (Cylind
40、rical Type) page 7/13 6. Electrical Characteristics Items Conditions Criteria 6.1 Full Charge The battery is charged with 1.62A constant current until the voltage reaches 4.20V. Then, the current is reduced in order to keep the constant voltage of 4.20V. The total charging time is 4.0 hours at 25 .
41、Within 1 hour, after fully charged at 25, the battery is discharged with 0.65A continuously until 2.5V of end voltage at 25. More than 300min. 6.2 Capacity Within 1 hour, after fully charged at 25, the battery is discharged with 3.25A continuously until 2.5V of end voltage at 25. More than 54min. 6.
42、3 Cycle Life The battery is repeated 300 times of Charge and Discharge cycles, (Charged by CC-CV of 1.62A-4.20V for 4.0 hours, Discharged by CC of 3.25A to 2.5V (E.V.) at 25. After the 300 cycles, the discharge time is measured by the Item 6.2. More than 180min. Within 1 hour, after fully charged at
43、 25, the battery is stored at 0 for 3 hours. After that, the discharge time is measured Item 6.2. at 0 . More than 30min.6.4 Temperature Characteristics Within 1 hour, after fully charged at 25, the battery is stored at 60 for 3 hours. After that, the discharge time is measured Item 6.2. at 60 . Mor
44、e than 50min. 6.5 Storage at Fully Charged State After fully charged at 25, the battery is stored for 20 days at 60 . After the storage, the battery is set in 25 for 3 hours. Then, the discharge time is measured Item 6.2. Then, the same battery is fully charged again and checked the second discharge
45、 time by the Item 6.2 at 25 . More than 30min. More than 40min. File No NCR18650-055 Energy Company, SANYO Electric Co., Ltd. Lithium-Ion Battery Business Unit Battery System Management Department Title Specifications of Lithium Ion battery (Cylindrical Type) page 8/13 6.6 Storage at Full Discharged
46、 State After fully charged at 25, the battery is discharged by the Item 6.2. Then, the battery is stored for 20 days at 60 . After the storage, the battery is set in 25 for 3 hours. Then, the discharge time is measured by Item 6.2. at 25. More than 50min. 6.7 Drop After fully charged at 25, the cell
47、 is dropped 3 times in random direction from a height of 1 m onto a flat surface of concrete. No rupture, no fire STANDARD TEST CONDITIONS: The testes shall be implemented with new batteries that were delivered within the last 7 days. The tests shall be performed at 252 (The standard temperature of
48、second grade is specified by JIS Z 8703 (Standard Test Conditions), 6520 % (The standard humidity of twentieth grade is specified by JIS Z 8703 (Standard Test Conditions). The grade of voltmeter and ammeter in the tests shall be higher than Class 0.5 which is specified by JIS C 1102 (Electric Indica
49、tor). 7. Design and Dimensions The battery design is shown in the following documents or drawings. (Drawing No. NCR18650B) 8. Appearance The battery should not have the following appearance issues at delivery: Scratch Rust Discoloration Dirt Deformation Leakage The battery should be in good condition. File No NCR18650-055 Energy Comp