《PA66美国杜邦101F物性表.pdf》由会员分享，可在线阅读，更多相关《PA66美国杜邦101F物性表.pdf（8页珍藏版）》请在三一文库上搜索。
1、PRODUCT INFORMATION DuPont Zytel 101F NC010 NYLON RESIN Product Information Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammabil
2、ity properties, good abrasion and chemical resistance. In addition, Zytel nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel nylon resin, including most flame retardant grades,
3、offer the ability to be coloured. The good melt stability of Zytel nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately e
4、quipped installations. For disposal, local regulations have to be observed. Zytel nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry. Zytel 101F NC010 is an internally lubricated polyamide 66 resin for i
5、njection moulding. It was developed for fast cycles and high productivity. General informationValueUnitTest Standard Resin IdentificationPA66-ISO 1043 Part Marking CodePA6650%ISO 527-1/-2 Strain at Break, 23C, 50mm/min40 / -%ISO 527-1/-2 Flexural Modulus2800 / 1200MPaISO 178 Tensile creep modulusISO
6、 899-1 1h* / 1400MPa 1000h* / 930MPa Charpy impact strengthISO 179/1eU 23CN / NkJ/m -30C400 / NkJ/m Charpy notched impact strengthISO 179/1eA 23C6 / 13kJ/m -30C4.5 / 3kJ/m Izod notched impact strengthISO 180/1A 23C5.5 / 11kJ/m -30C6 / 4kJ/m -40C5.5 / -kJ/m Izod impact strengthISO 180/1U 23C300 / NkJ
7、/m -30C300 / -kJ/m Thermal propertiesdry / condUnitTest Standard Melting temperature, 10C/min262 / *CISO 11357-1/-3 Glass transition temperature, 10C/min60 / -CISO 11357-1/-2 Temp. of deflection under loadISO 75-1/-2 1.8 MPa70 / *C 0.45 MPa200 / *C Page: 1 of 8Revised: 2015-02-12 To find out more, v
8、isit DuPont Performance Polymers or contact nearest DuPont location. North AmericaAsia PacificEurope/Middle East/Africa Tel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E
9、.I. du Pont de Nemours and Company or its affiliates. All rights reserved. DuPont Zytel 101F NC010 NYLON RESIN Vicat softening temperature, 50C/h, 50N240 / *CISO 306 Coeff. of linear therm. expansion, parallel100 / *E-6/KISO 11359-1/-2 Coeff. of linear therm. expansion, normal110 / *E-6/KISO 11359-1
10、/-2 Thermal conductivity of melt0.16W/(m K)- Spec. heat capacity of melt2790J/(kg K)- Eff. thermal diffusivity5E-8m/s- RTI, electricalUL 746B 0.75 mm130 / *C 1.5mm130 / *C RTI, impactUL 746B 0.75 mm75C 1.5mm75 / *C RTI, strengthUL 746B 0.75 mm85C 1.5mm85 / *C Flammabilitydry / condUnitTest Standard
11、Burning Behav. at 1.5mm nom. thickn.V-2 / *classIEC 60695-11-10 Thickness tested1.5 / *mmIEC 60695-11-10 UL recognitionUL / *-UL 94 Burning Behav. at thickness hV-2 / *classIEC 60695-11-10 Thickness tested0.71 / *mmIEC 60695-11-10 Oxygen index28 / *%ISO 4589-1/-2 Glow Wire Flammability IndexIEC 6069
12、5-2-1/2 0.75mm960 / -C 1.5mm960 / -C 3mm960 / -C Glow Wire Ignition TemperatureIEC 60695-2-1/3 0.75mm725 / -C 1.5mm750 / -C 3mm800 / -C Electrical propertiesdry / condUnitTest Standard Relative permittivityIEC 60250 100Hz3.8 / 8- 1MHz3.6 / 4.6- Dissipation factorIEC 60250 100Hz140 / -E-4 1MHz180 / 1
13、000E-4 Volume resistivity1E13 / 1E13Ohm*mIEC 60093 Electric strength31.5 / 26kV/mmIEC 60243-1 CTI, 23C0 / -PLCUL 746A Other propertiesdry / condUnitTest Standard Humidity absorption, 2mm2.6 / *%Sim. to ISO 62 Water absorption, 2mm8.5 / *%Sim. to ISO 62 Density1140 / -kg/mISO 1183 Density of melt970k
14、g/m- Film Propertiesdry / condUnitTest Standard Strain at yield, parallel4.5 / *%ISO 527-3 VDA PropertiesValueUnitTest Standard Emission of organic compounds6.5gC/gVDA 277 Odour3classVDA 270 Injectiondry / condUnitTest Standard Drying Recommendedyes- Drying Temperature80C- Drying Time, Dehumidified
15、Dryer2 - 4h- Processing Moisture Content0.2%- Melt Temperature Optimum290C- Page: 2 of 8Revised: 2015-02-12 To find out more, visit DuPont Performance Polymers or contact nearest DuPont location. North AmericaAsia PacificEurope/Middle East/Africa Tel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Te
16、l: +81 3 5521 8600Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. DuPont Zytel 101F NC010 NYLON RESIN Min. melt temperature280C- Max. melt temperature300C- Max. scr
17、ew tangential speed0.4 / *m/s- Mold Temperature Optimum70C- Min. mould temperature50C- Max. mould temperature90C- Hold pressure range50 - 100MPa- Hold pressure time4s/mm- Ejection temperature190C- Characteristics Injection MouldingProcessing PelletsDelivery form Release agentAdditives North America
18、Europe Asia Pacific South and Central America Near East/Africa Global Regional Availability Page: 3 of 8Revised: 2015-02-12 To find out more, visit DuPont Performance Polymers or contact nearest DuPont location. North AmericaAsia PacificEurope/Middle East/Africa Tel: +1 302 999-4592 Toll-Free (USA):
19、 800 441-0575 Tel: +81 3 5521 8600Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. DuPont Zytel 101F NC010 NYLON RESIN Diagrams Dynamic Shear modulus-temperature (co
20、nd.) Temperature in C Shear modulus in MPa -50050100150200250 1E1 1E2 1E3 1E4 Dynamic Tensile modulus-temperature (dry) Temperature in C Dyn. Tensile modulus in MPa tan d E in MPa -100-50050100150200 1E0 1E1 1E2 1E3 1E4 1E-1 1E0 1E1 1E2 1E3 0 0.05 0.1 0.15 0.2 Page: 4 of 8Revised: 2015-02-12 To find
21、 out more, visit DuPont Performance Polymers or contact nearest DuPont location. North AmericaAsia PacificEurope/Middle East/Africa Tel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trademark or registered tr
22、ademark of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. DuPont Zytel 101F NC010 NYLON RESIN Dynamic Tensile modulus-temperature (cond.) Temperature in C Dyn. Tensile modulus in MPa tan d E in MPa -100-50050100150200 1E2 1E3 1E4 1E0 1E1 1E2 0 0.05 0.1 Page: 5 of 8Revise
23、d: 2015-02-12 To find out more, visit DuPont Performance Polymers or contact nearest DuPont location. North AmericaAsia PacificEurope/Middle East/Africa Tel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trade
24、mark or registered trademark of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. DuPont Zytel 101F NC010 NYLON RESIN Chemical Media Resistance Acids Acetic Acid (5% by mass) (23C) Citric Acid solution (10% by mass) (23C) Lactic Acid (10% by mass) (23C) Hydrochloric Acid (3
25、6% by mass) (23C) Nitric Acid (40% by mass) (23C) Sulfuric Acid (38% by mass) (23C) Sulfuric Acid (5% by mass) (23C) Chromic Acid solution (40% by mass) (23C) Bases Sodium Hydroxide solution (35% by mass) (23C) Sodium Hydroxide solution (1% by mass) (23C) Ammonium Hydroxide solution (10% by mass) (2
26、3C) Alcohols Isopropyl alcohol (23C) Methanol (23C) Ethanol (23C) Hydrocarbons n-Hexane (23C) Toluene (23C) iso-Octane (23C) Ketones Acetone (23C) Ethers Diethyl ether (23C) Mineral oils SAE 10W40 multigrade motor oil (23C) SAE 10W40 multigrade motor oil (130C) SAE 80/90 hypoid-gear oil (130C) Insul
27、ating Oil (23C) Motor oil OS206 304 Ref.Eng.Oil, ISP (135C) Automatic hypoid-gear oil Shell Donax TX (135C) Hydraulic oil Pentosin CHF 202 (125C) Standard Fuels ISO 1817 Liquid 1 - E5 (60C) ISO 1817 Liquid 2 - M15E4 (60C) ISO 1817 Liquid 3 - M3E7 (60C) Page: 6 of 8Revised: 2015-02-12 To find out mor
28、e, visit DuPont Performance Polymers or contact nearest DuPont location. North AmericaAsia PacificEurope/Middle East/Africa Tel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trademark or registered trademark
29、of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. DuPont Zytel 101F NC010 NYLON RESIN ISO 1817 Liquid 4 - M15 (60C) Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23C) Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23C) Diesel fuel (pref. ISO 1817 Liquid
30、 F) (23C) Diesel fuel (pref. ISO 1817 Liquid F) (90C) Diesel fuel (pref. ISO 1817 Liquid F) (90C) Salt solutions Sodium Chloride solution (10% by mass) (23C) Sodium Hypochlorite solution (10% by mass) (23C) Sodium Carbonate solution (20% by mass) (23C) Sodium Carbonate solution (2% by mass) (23C) Zi
31、nc Chloride solution (50% by mass) (23C) Other Ethyl Acetate (23C) Hydrogen peroxide (23C) DOT No. 4 Brake fluid (130C) Ethylene Glycol (50% by mass) in water (108C) 1% nonylphenoxy-polyethyleneoxy ethanol in water (23C) 50% Oleic acid + 50% Olive Oil (23C) Water (23C) Water (90C) Phenol solution (5
32、% by mass) (23C) Symbols used: possibly resistant Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, prope
33、rty change). not recommended - see explanation Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure). Contact DuPont for Material Safety Data Sheet,
34、general guides and/or additional information about ventilation, handling, purging, drying, etc. ISO Mechanical properties measured at 4.0mm (Hytrel measured at 2 mm), IEC Electrical properties measured at 2.0mm, all ASTM properties measured at 3.2mm, and test temperatures are 23C unless otherwise st
35、ated. The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be u
36、sed to establish specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and di
37、sposal are outside our control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product, evaluation under end-use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a
38、recommendation to infringe on patents. Caution: Do not use in medical applications involving permanent implantation in the human body. For other medical applications, discuss with your DuPont customer representative and read Medical Caution H-50103-4. Page: 7 of 8Revised: 2015-02-12 To find out more
39、, visit DuPont Performance Polymers or contact nearest DuPont location. North AmericaAsia PacificEurope/Middle East/Africa Tel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trademark or registered trademark o
40、f E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. DuPont Zytel 101F NC010 NYLON RESIN Copyright 2014 DuPont or its affiliates. All Rights Reserved. The DuPont Oval Logo, DuPont, The miracles of science and all products denoted with or are registered trademarks or trademar
41、ks of E.I. du Pont de Nemours and Company or its affiliates. Page: 8 of 8Revised: 2015-02-12 To find out more, visit DuPont Performance Polymers or contact nearest DuPont location. North AmericaAsia PacificEurope/Middle East/Africa Tel: +1 302 999-4592 Toll-Free (USA): 800 441-0575 Tel: +81 3 5521 8600Tel: +41 22 717 51 11 Copyright 2014 DuPont. The DuPont Oval Logo is a trademark or registered trademark of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved.