《EC-Declaration-of-Conformity-V.2.docx》由会员分享，可在线阅读，更多相关《EC-Declaration-of-Conformity-V.2.docx（2页珍藏版）》请在三一文库上搜索。
1、EC Declaration of ConformityThe undersigned, supplierCompany NameCompany addressCompany Town + Post CodeCompany CountryMust to haveHerewith declares that the productProduct nameProduct identification Model-Seriesis in conformity with the provisions of the following EC Directive(s) when installed and
2、 used in accordance with the installation instructions and user manual contained in the product documentation :98/37/EC Machine Directive2006/95/EC Low Voltage Directive2004/108/EC EMC DirectiveYou may need to list here 97/23/EC Pressure Equipment Directive, if pressure vessels are used in your mach
3、ine.and that the standards and/or technical specifications referenced below have been applied :EN ISO 12100-1 : 2003 Basic concepts, general principles for Design : Basic terminology, MethodologyEN ISO 12100-2 : 2003 Basic concepts, general principles for Design : Technical PrinciplesEN 415-3 : 1999
4、 Safety of packaging machines Part 3 : Form, fill and seal machinesEN ISO 13850 : 2008 Emergency Stop, Principles for Design.EN 953 : 1997 Guards General requirements for the design and construction of fixed and movable guards.EN ISO 14121-1 : 2007 Risk assessment Part 1 : PrinciplesEN 60204-1 : Ele
5、ctrical Equipment of Machines part 1 : general requirementsEN 60034-9 : 2005 Noise limitsEN 61000-6-4:2001 Electromagnetic compatibility (EMC) Part 6-4 : Generic standards Emission for industrial environmentsEN 61000-6-2:2001 Electromagnetic compatibility (EMC) Part 6-2 : Generic standards Immunity
6、for industrial environmentsAlso check if EN 349:1993, EN 811:1996 appliesA machine corresponding with the abovementioned type and model has been type tested according module B (or Module G?) and found in compliance with the above by following notified body: Name of Notified BodyAdress of Notified Bo
7、dyTown + Post Code + Country + ID number EC type-examination Certificate number + Date (yr/month/day)The Technical Construction file is kept at the abovementioned supplier s address.EN 60204-1:2006 is requiredto be listed. Butnot all the restnorms listed hereare must to bestated in theDOC. Choose th
8、eones you follow.You may notinvolve any notifiedbody to do specifictest. In this case,you can take thissession out.Or if you do the test according to module A, just list A there.For Making, ourvendors do not havethe Software, URD,final Processsummary andOverall RiskAssessment, itsbetter to state the
9、documentation is kept at our plant and list the plant name,address etc here.This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of the manufacturer that the machine mentioned above complies with all essential requirements in the way specified and is conformity with the type for which above mentioned EC type examination certificate has been issued.Name and function Manufacturer stamp Signature and title