《ARCGIS制图时符号叠加显示冲突解决方案.doc》由会员分享，可在线阅读，更多相关《ARCGIS制图时符号叠加显示冲突解决方案.doc（3页珍藏版）》请在三一文库上搜索。
1、ARCGIS制图时符号叠加显示冲突解决方案在制图的过程当中，经常会碰到在一个较小区域内，要同时摆放几个符号，制作过程中可能有些符号没有显示，解决这一冲突的办法是，鼠标右键点击符号图层的属性。在属性对话框中选择，Placeme nt Properties，点击 conflict Detect ion，设置 Label weight 禾口 Feature weight 的 值，就可以解决符号叠加显示的冲突。Placement PropertiesPlacementConflict DetectionLabel weight:MediumThis determines whether the lab
2、els in this layer can be overlapped by labels from other layers. The higher the weight the less likely the labels are to be overlapped.Feature WeightFeature weight: | M ediumThis determines whether the features in this layer :an be overlapped by labels from this or any other layer, .abels will only
3、be placed over features with a lower weight.Tip: For fastest drawing speed use feature weigh: None.BufferBuffer defined as a ratio of the label's height: 10This prevents adjacent labels from being placed too close together by defining a buffer around each label within which no other labels will be placed.Tip: 0 = no label buffer, 1 = label buffer same height as label.v Place overlapping labels