《h3c导入配置文件的方法.doc》由会员分享，可在线阅读，更多相关《h3c导入配置文件的方法.doc（2页珍藏版）》请在三一文库上搜索。
1、精品文档 h3c 导入配置文件的方法 一、交换机的配置文件导入 1、查看交换机的原来的型号以及系统配置文件 (重要不然导进入不生效可能 ) 1.1、 dis ver 1.2、dir /all 2、 用 con 线插进新的交换机确认型号以及系统在配置管理 vlan接口划入vian, PC配置跟 vlan 同一段(保证连通性) 2.1、 Switch 配置 vlan inter vlan 2 ip add 172.17.254.53 24 inter g1/0/1 port acc vlan 2 2.2、配置 PC 的 IP、gateway! 3、 导入配置文件(导入之前定义好 tftp 的目录)
2、 tftp 172.17.254.1 get 3F-s5528c.cfg startup.cfg File will be transferred in binary mode Downloading file from remote TFTP server, please wait TFTP: 8348 bytes received in 0 second(s) File downloaded successfully. startup saved-configuration startup.cfg ma - 配置主文件 Please wait . Done! startup saved-c
3、onfiguration startup.cfg backup - 备份文件下次启动的顺序 Please wait . Done! sav - 保存以上操作 The current configuration will be written to the device. Are you sure? Y/N:y Please input the file name(*.cfg)flash:/startup.cfg (To leave the existing filename unchanged, press the enter key): flash:/startup.cfg exists,
4、overwrite? Y/N:n - 注意 reboot - 重新启动 Start to check configuration with next startup configuration file, please wait. DONE! This command will reboot the device. Current configuration will be lost in next startup if you continue. Continue? Y/N:y #Apr 26 20:09:47:936 2000 H3C DEV/1/REBOOT: Reboot device
5、 by command. Current startup saved-configuration file: NULL Next main startup saved-configuration file: flash:/startup.cfg Next backup startup saved-configuration file: flash:/startup.cfg dis startup 看配置主次文件是否生效！ startup saved-configuration startup.cfg main Please wait . Done! 精品文档 %Apr 26 20:09:48:21 2000 H3C DEV/4/SYSTEM REBOOT: System is rebooting now. Press ENTER to get started. %Apr 26 20:00:39:607 2000 3F-S5528C SHELL4/LOGIN: Console login from aux0