《【BS标准word原稿】BS EN 12053-2001 工业卡车的安全 噪声发射测量的试验方法.doc》由会员分享，可在线阅读，更多相关《【BS标准word原稿】BS EN 12053-2001 工业卡车的安全 噪声发射测量的试验方法.doc（24页珍藏版）》请在三一文库上搜索。
1、豆丁网：http:/ STANDARD BS EN12053:2001Incorporating Corrigenda Nos 1 and 2Safety of industrialtrucks Test methods for measuring noise emissionsThe European Standard EN 12053:2001 has the status of aBritish StandardICS 17.140.30; 53.060 - - ,- , , , , - Copyright European Committee for StandardizationPr
2、ovided by IHS under license with CENNo reproduction or networking permitted without license from IHSNot for ResaleBS EN 12053:2001National forewordThis British Standard is the official English language version ofEN 12053:2001, including Corrigendum July 2002.The UK participation in its preparation w
3、as entrusted to Technical CommitteeMHE/7, Industrial trucks Safety, which has the responsibility to:aid enquirers to understand the text;present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;monitor related inte
4、rnational and European developments and promulgate them in the UK.A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found i
5、n the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsib
6、le for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.-,-,-This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes
7、 into effect on15 August 2001 BSI 6 February 2003ISBN 0 580 37072 0Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page,pages 2 to 18, an inside back cover and a back cover.The BSI copyright date displayed in this document indicates when the document was la
8、st issued.Amd. No.DateComments14101Corrigendum No. 117 January 2003Changes to 3.2, 4.1, 6.3.1.5, 6.3.2.6and Clause 814346Corrigendum No. 26 February 2003Correction of corrigendum to 3.2Amendments issued since publicationEUROPEAN STANDARD NORME EUROPENNEEUROPISCHE NORMEN 12053June 2001ICS 17.140.30;
9、53.060Incorporating corrigendum July 2002English versionSafety of industrial trucks - Test methods for measuring noise emissionsScurit des chariots de manutention - Mthodes dessai pour le mesurage des missions de bruitSicherheit von Flurforderungzeugen - Verfahren fr dieMessung der GerauschemissionT
10、his European Standard was approved by CEN on 19 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refe
11、rences concerning such national standards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into
12、 its own language and notified to the Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain
13、, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN DE NOR M A L I S A TI ON EUR O P I S C H ES KOM I T E E F R NOR M UNG -,-,-Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reser
14、ved worldwide for CEN national Members.Ref. No. EN 12053:2001 EPage 2EN 12053:2001ContentsForeword. 3Introduction . 51Scope . 52Normative references . 53Terms and definitions. 64Installation and equipment . 94.1Test environment . 94.2Equipment and condition of the truck . 104.3Position of the truck
15、during measurement . 104.3.1LIFT and IDLE conditions . 104.3.2DRIVE condition . 105Operating conditions during measurement . 10-,-,-5.1General. 105.2Load of the truck . 105.3Operation of the truck during measurement . 105.3.1General. 105.3.2LIFT condition . 105.3.3IDLE condition. 115.3.4DRIVE condit
16、ion . 115.4Trucks equipped with a cab. 115.4.1Cab with an air conditioning and/or pressurized ventilating system(s) . 115.4.2Cab without air conditioning or pressurized ventilating system(s) . 116Noise determination . 116.1Instrumentation . 116.2Microphone positions . 116.2.1Microphone positions for
17、 determination of the sound pressure levels at the operatorsposition . 116.2.2Microphone positions for determination of the sound power levels . 116.3Measurements . 126.3.1Measurements of sound pressure levels at operators position . 126.3.2Sound power level determination . 137Measurement uncertaint
18、ies . 148Information to be recorded . 149Declaration of noise emission values. 15Annex A (Normative) Calculation of levels in an average operational cycle . 16A.1Calculation of the emission sound pressure level in an operational cycle. 16A.2Calculation of the sound power level for an operational cyc
19、le . 16A.3Time proportion factors of the operating conditions. 16Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives. . 18Copyright European Committee for StandardizationProvided by IHS under license with CENNo reproduction
20、or networking permitted without license from IHSNot for ResalePage 3EN 12053:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 150 Industrial Trucks - Safety, the secretariat of which is held by BSI.This European Standard shall be given the status of a national stand
21、ard, either by publication of an identical text or by endorsement, at the latest by December 2001, and conflicting national standards shall be withdrawn at the latest by December 2001.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Fre
22、e Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries a
23、re bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.This European Standard is one of a series of European Standa
24、rds for the safety of Industrial trucks.EN 1175-1:1998Safety of Industrial trucks - Electrical requirements - Part 1: General requirements for battery- powered trucksEN 1175-2:1998Safety of Industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine power
25、ed trucksEN 1175-3:1998Safety of Industrial trucks - Electrical requirements - Part 3: Specific requirements for electrical power transmission systems of internal combustion engine powered trucksEN 1459:1998Safety of Industrial trucks - Self propelled variable reach trucksEN 1525:1997Safety of Indus
26、trial trucks - Driverless industrial trucks and their systemsEN 1526:1997Safety of Industrial trucks - Additional requirements for automated functions for industrial trucks-,-,-EN 1551:2000Safety of Industrial trucks - Self propelled trucks over 10 000kg capacityEN 1726-1:1998Safety of industrial tr
27、ucks - Self propelled trucks up to and including 10 000kg capacity and industrial tractors with a drawbar pull up to and including 20 000N Part 1: General requirementsEN 1726-2:2000Safety of Industrial trucks - Self propelled trucks up to and including 10 000kg capacity and industrial tractors - wit
28、h a drawbar pull up to and including 20 000N Part 2: Additional requirements for trucks with elevating operator position and/or trucks especially designed to travel with elevated loadsEN 1755:2000Safety of Industrial trucks - Operation in potentially explosive atmospheres; Use in flammable gas, vapo
29、ur, mist and dustCopyright European Committee for StandardizationProvided by IHS under license with CENNo reproduction or networking permitted without license from IHSNot for ResalePage 4EN 12053:2001EN 1757-1: 2001 Safety of Industrial trucks - Pedestrian propelled trucks - Part 1: Stacker trucks E
30、N 1757-2:2001Safety of Industrial trucks - Pedestrian propelled trucks - Part 2: Pallet trucks prEN 1757-3:1997 Safety of Industrial trucks - Pedestrian propelled trucks - Part 3: Platform trucksprEN 1757-4:1997 Safety of Industrial trucks - Pedestrian propelled trucks - Part 4: Scissor lift pallet
31、trucksEN 12895:2000Safety of Industrial trucks - Electromagnetic compatibilityEN 12053:2001Safety of Industrial trucks - Test methods for measuring noise emissions prEN 13059:1997Safety of Industrial trucks - Test methods for measuring vibrationprEN ISO 13564:1996 Safety of Industrial trucks - Test methods for measuring visibility from self propelled trucks(ISO/DIS 13564:1996)-,-,-Page 5EN 12053:2001IntroductionThis European Standard is a type C standard as defined in EN 292-1. Thi