《【BS英国标准】BS EN 14017-2005+A1-2008 Agricultural and forestry machinery — Solid fertilizer distributors — Safety.doc》由会员分享，可在线阅读，更多相关《【BS英国标准】BS EN 14017-2005+A1-2008 Agricultural and forestry machinery — Solid fertilizer distributors — Safety.doc（29页珍藏版）》请在三一文库上搜索。
1、Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSIBRITISH STANDARDAgricultural and forestry machinery Solid fertilizer distributors SafetyICS 65.060.25 BS EN14017:2005+A1:2008BS EN 14017:2005+A1:2008National forewordThis British Standard is the UK implement
2、ation of EN 14017:2005+A1:2008. It supersedes BS EN 14017:2005 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1
3、 is indicated by .The UK participation in its preparation was entrusted to Technical CommitteeAGE/32, Agrcultural implements and trailers.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary p
4、rovisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authorityStartegy Committee on 31 May 2006Amendments/corrigenda/issued since publicationDateCommen
5、ts BSI 200930 April 2009Implementation of CEN amendment A1:2008Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSIISBN 978 0 580 67050 3EUROPEAN STANDARD NORME EUROPENNEEUROPISCHE NORMEN 14017:2005+A1October 2008ICS 65.060.25Supersedes EN 14017:2005English V
6、ersionAgricultural and forestry machinery - Solid fertilizer distributors - SafetyMatriel agricole et forestier - Distributeurs dengrais solides - ScuritLand- und Forstmaschinen - Mineraldngerstreuer - SicherheitThis European Standard was approved by CEN on 29 August 2005 and includes Amendment 1 ap
7、proved by CEN on 9 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
8、 standards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notif
9、ied to the CEN Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malt
10、a, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONC OM I T EUR OP EN DE NOR M AL I S ATI ON EUR OP I S C HES KOM I TEE F R NOR M UNG Management Centre: rue de Stassart, 36 B-1050 BrusselsLicensed
11、 Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Ref. No. EN 14017:2005+A1:2008: EBS EN 14017:2005+A1:2008EN 14017:2005+A1:2008 (E)Licensed Copy: x x, The
12、University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSIContentspageForeword. 3Introduction . 41Scope . 52Normative references . 63Terms and definitions . 64List of significant hazards . 75Safety requirements and/or protective measures . 85.1General. 85.2Stability when parked and for ma
13、nual handling . 85.2.1General. 85.2.2Mounted machines fitted with rollers for manual handling when dismounted. 95.2.3Machines with adjustable supporting devices . 95.3Distributing components . 95.3.1Swivelling and movable components. 95.3.2Spreading plates and oscillating tubes . 95.4Feeding compone
14、nts guarding . 135.5Loading . 135.5.1Safe access for loading. 135.5.2Boarding means to loading location. 145.6Checking of the hopper contents. 155.7Protection against ejection of fertilizer . 165.8Removal of the spreading device. 165.9Flow rate calibration system . 165.10Hitching and clearance zone
15、. 165.11Noise . 185.11.1 Noise reduction as a safety requirement . 185.11.2 Verification of requirements on noise based on noise emission values. 186Verification of the safety requirements and/or protective measures . 186.1Stability when parked and for manual handling . 186.1.1General. 186.1.2Mounte
16、d machines fitted with rollers for manual handling when dismounted. 186.2Swivelling and movable components. 187Information for use . 197.1Instruction handbook . 197.2Marking . 20Annex A (informative) Stability of the tractor distributor combination . 21Annex B (informative) Examples of pictograms .
17、22Annex ZA (informative) Relationship between this European Standard and the Essential Requirementsof EU Directive 98/37/EC, amended by Directive 98/79/EC. 24Bibliography . 2525Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSIForewordThis document (EN 1401
18、7:2005+A1:2008) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement,
19、at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by December 2009.This document includes Amendment 1, approved by CEN on 2008-08-14. This document supersedes EN 14017:2005.The start and finish of text introduced or altered by amendment is indicated in
20、the text by tags ! .This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of thi
21、s document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Irela
22、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSIIntroductionThis European Standard is a type
23、 C standard as stated in EN ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this European Standard. These hazards are specific to solid fertilizer distributors.Significant hazards that are common t
24、o all agricultural machines (self-propelled, mounted, semi-mounted and trailed) are dealt with in EN 1553:1999.When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the
25、 other standards, for machines that have been designed and built according to the provisions of this type C standard.Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI1ScopeThis European Standard, applied together with EN 1553:1999, specifies the safety req
26、uirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled fertilizer distributors for solid fertilizer application, i.e. full width solid fertilizer distributors, solid fertilizer broadcasters, distributors with oscillating tube and line-dis
27、tributors as well as solid fertilizer distributors driven by an auxiliary engine to be used by one operator only, used in agriculture, horticulture and in forestry. In addition, this European Standard specifies the type of information on safe working practices (including residual risks) to be provid
28、ed by the manufacturer.When requirements of this European Standard are different from those which are stated in EN 1553:1999 the requirements of this European Standard take precedence over the requirements of EN 1553:1999 for machines that have been designed and built according to the provisions of
29、this European Standard.It does not apply to: combined seed and fertilizer drills; machines for distributing granulated pesticides; pedestrian controlled distributors; knapsack distributors.This European Standard deals with all the significant hazards, hazardous situations and events relevant to soli
30、d fertilizer distributors, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4), excepting the hazards arising from: inadequate lighting of moving/working area; inadequate visibility from drivers/operators position; inadequate seating; travelling functi
31、ons (drive, braking etc.); rolling over; equipment for loading fertilizer into the machine; an auxiliary engine.It is not applicable to electromagnetic compatibility (EMC) nor to environmental hazards (except noise). These aspects are covered by EN 13739-1:2003, EN 13739-2:2003, EN 13740-1:2003 and
32、EN 13740-2:2003.This European Standard is not applicable to solid fertilizer distributors which are manufactured before the date of its publication as EN.Licensed Copy: x x, The University of Sheffield, 28/06/2009 15:57, Uncontrolled Copy, (c) BSI2Normative referencesThe following referenced documents are indispensable for the applicat