《【BS英国标准】BS EN 13277-6-2003 Protective equipment for martial arts — Part 6 Additional requirements and test methods for breast protectors for females.doc》由会员分享，可在线阅读，更多相关《【BS英国标准】BS EN 13277-6-2003 Protective equipment for martial arts — Part 6 Additional requirements and test methods for breast protectors for females.doc（15页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN13277-6:2003Protective equipment for martial arts Part 6: Additional requirements and test methods for breast protectors for femalesThe European Standard EN 13277-6:2003 has the status of aBritish StandardICS 13.340.10 BS EN 13277-6:2003National forewordThis British Standard is
2、 the official English language version ofEN 13277-6:2003.The UK participation in its preparation was entrusted by Technical Committee PH/3, Protective clothing, to Subcommittee PH/3/11, Protective clothing for sports players, which has the responsibility to:aid enquirers to understand the text;prese
3、nt to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;monitor related international and European developments and promulgate them in the UK.A list of organizations represented on this subcommittee can b
4、e obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facil
5、ity of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations.T
6、his British Standard was published under the authority of the Standards Policy and Strategy Committee on9 May 2003 BSI 9 May 2003ISBN 0 580 41792 1Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page,pages 2 to 11 and a back cover.The BSI copyright date dis
7、played in this document indicates when the document was last issued.Amd. No.DateCommentsAmendments issued since publicationEUROPEAN STANDARD NORME EUROPENNEEUROPISCHE NORMEN 13277-6April 2003ICS 13.340.10English versionProtective equipment for martial arts - Part 6: Additional requirements and test
8、methods for breast protectors for femalesEquipement de protection pour les arts martiaux - Partie 6: Exigences et mthodes dessai complmentaires pour protecteurs de poitrine pour femmeSchutzausrstung fr den Kampfsport - Teil 6: Zustzliche Anforderungen und Prfverfahren fr Brustschtzer fr FrauenThis E
9、uropean Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference
10、s concerning such national standards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its
11、own language and notified to the Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Port
12、ugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T EUR O P EN DE NOR M A L I S A TI ON EUR O P I S C H ES KOM I TEE F R NOR M UNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by a
13、ny means reserved worldwide for CEN national Members.Ref. No. EN 13277-6:2003 EEN 13277-6:2003 (E)ContentsForeword .31Scope .42Normative references .43Terms and definitions.44Requirements .44.1General .44.2Sizing.44.3Combinations .44.4Restraint.54.5Zone of protection .54.6Impact performance.65Testin
14、g .65.1General .65.2Sampling .65.3Conditioning .65.4Restraint.65.5Zone of protection .75.6Impact performance.76Marking .107Information supplied by the manufacturer.10Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives .1111F
15、orewordThis document (EN 13277-6:2003) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN.This document European Standard shall be given the status of a national standard, either by publ
16、ication of an identical text or by endorsement, at the latest by October 2003, and conflicting national standards shall be with- drawn at the latest by October 2003.This standard is the sixth part of a series covering requirements for protective equipment used in martial arts. Part 1 deals with gene
17、ral requirements and test methods and the other parts deal with specific areas of the body.Part 1: General requirements and test methods.Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors. Part 3: Additional requirements and test methods fo
18、r trunk protectors.Part 4: Additional requirements and test methods for head protectors.Part 5: Additional requirements and test methods for genital protectors and abdominal protectors. Part 6: Additional requirements and test methods for breast protectors for females.This document has been prepared
19、 under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal R
20、egulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain
21、, Sweden, Switzerland and the United Kingdom.1ScopeThis European Standard specifies additional requirements and test methods for breast protectors for females used in unarmed martial arts such as Taekwondo, Karate, Kick-Boxing and similar disciplines.2Normative referencesThis European Standard incor
22、porates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Eur
23、opean Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments).EN 13277-1:2000, Protective equipment for martial arts Part 1: General requirements and test methods.3Terms and definitionsFor
24、 the purposes of this European Standard the terms and definitions given in EN 13277-1:2000 and the following apply.3.1under bust girthhorizontal girth of the body immediately below the breasts measured as for the bust girth4Requirements4.1GeneralThe general requirements for breast protectors for fem
25、ales shall be the same as those given in EN 13277-1. Edges of hard material shall bea)covered with soft padding material, orb)so designed that they end parallel to the body surface.Breast protectors for females shall be so designed that they adapt to the breast of the wearer.4.2SizingBreast protecto
26、rs shall be sized against the wearers under bust girth and the brassire cup size which is normally worn.The size shall be marked on the protector. It shall be explained in the information supplied by the manufacturer.4.3CombinationsBreast protectors can be used in combination with other protectors u
27、sed in martial arts.If combined use is allowed, the requirements specified for the individual protector shall also apply. Possible combinations shall be indicated in the information supplied by the manufacturer. If combined use is not allowed by the manufacturer, this restriction shall be clearly in
28、dicated in the information supplied by the manufacturer.4.4RestraintA restraint system shall be supplied by the manufacturer which enables the user to attach the breast protector without any assistance.The restraint system shall meet the requirements defined in EN 13277-1:2000, 4.4.4.5Zone of protec
29、tionLocation and dimensions of the zone of protection shall be as given in Figure 1 and Table 1.In case of domed breast protector Figure 1 and Table 1 define the dimensions of a plane projection of the zone of protection.Figure 1 Location and dimensions of the zone of protection of breast protectors
30、Table 1 Zone of protection of breast protectors for femalesDimensions in centimetresWearers under bust girthBrassire cuplRmin. 80 to 90A, B16 25,5C, D17 26,5 90 to 100A, B17 26,0C, D18 27,0E to G19 28,0 100A, B19 27,0C, D20 28,0E to H21 29,04.6Impact performanceBreast protectors for females conform
31、to this European Standard if the highest peak force recorded according to5.6.1 and the highest relative deformation of all individual tests calculated according to 5.6.2 are within the hatched area shown in Figure 2.Key1Force measured according to 5.6.1, in kN2Relative deformation according to 5.6.2
32、, in %A6 kN and 30 % relative deformationB2 kN and 80 % relative deformationFigure 2 Diagram for evaluating the conformance with the impact performance requirements5Testing5.1GeneralIf no specific test is specified, the requirements of this standard shall be tested by measurement, visual inspection,
33、 tactile examination etc.For the tests new, unused protectors shall be used.5.2SamplingSampling shall be carried out in accordance with EN 13277-1:2000, 5.1.5.3ConditioningConditioning is carried out in accordance with EN 13277-1:2000, 5.2.5.4RestraintRestraint testing shall be carried out as define
34、d in EN 13277-1:2000, 5.4. When testing the restraint, the protector shall be attached to a dummy or to a model body part, or shall be put on by a subject. The dummy, the model body part or subject shall have dimensions within those specified by the manufacturer for users of the product.A test force
35、 of (20 1) N shall be applied as close as possible on the limits of the zone of protection as shown inFigure 3 vertically up and down.Key1 and 2 Order of the test directionsFigure 3 Test directions at breast protectors5.5Zone of protectionWhen tested in accordance with EN 13277-1:2000, 5.5, the protector shall be placed in its natural unloaded shape on a flat surface. The gauge shall be placed flat onto the surface of the zone of protection. In case of an anatomically shap