《BS EN 13775-3-2003 铁路设施 新型和改造的货运车辆的测量 第3部分 带两个轮副的货运车.pdf》由会员分享，可在线阅读，更多相关《BS EN 13775-3-2003 铁路设施 新型和改造的货运车辆的测量 第3部分 带两个轮副的货运车.pdf（38页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13775-3:2003 Railway applications Measuring of new and modified freight wagons Part 3: Freight wagons with 2 wheelsets The European Standard EN 13775-3:2003 has the status of a British Standard ICS 45.060.20 ? Copyright European Committee for Standardization Provided by IHS un
2、der license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-,- BS EN 13775-3:2003 This British Standard, was published under the authority of the Standards Policy an
3、d Strategy Committee on 26 June 2003 BSI 26 June 2003 ISBN 0 580 42149 X National foreword This British Standard is the official English language version of EN 13775-3:2003. The UK participation in its preparation was entrusted by Technical Committee RAE/1, Railway applications, to Subcommittee RAE/
4、1/-/9, Wagons (tank/freight), which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found
5、 in the BSI Catalogue under the section entitled “ International Standards Correspondence Index” , or by using the “ Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are res
6、ponsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep
7、 the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 34, an inside back cover and a back cover. The BSI copyright date displayed
8、in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/200
9、8 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-,- EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13775-3 June 2003 ICS 45.060.20 English version Railway applications - Measuring of new and modified freight wagons - Part 3: Freight wagons with 2 wheelsets Appl
10、ications ferroviaires - Mesure des wagons lors de leur construction et lors de modifications - Partie 3: Wagons deux essieux Bahnanwendungen - Vermessung von Gterwagen beim Neubau und bei Umbauten - Teil 3: Gterwagen mit 2 Radstzen This European Standard was approved by CEN on 20 February 2003. CEN
11、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli
12、cation to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the s
13、ame status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingd
14、om. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13775-3:2003 E Copy
15、right European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-,- EN 13775-3:2003 (E) 2 Contentspage Fore
16、word .3 Introduction.4 1Scope4 2Normative references5 3Terms and definitions .6 4Symbols and abbreviated terms6 5Requirements.6 5.1General .6 5.2Precondition.6 5.3Measuring processes7 Annex A (normative) Control sheet form27 Annex B (informative) Measuring processes on running gear.30 Annex C (infor
17、mative) Terminology 33 Bibliography34 Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-
18、,- ? EN 13775-3:2003 (E) 3 Foreword This document (EN 13775-3:2003) has been prepared by Technical Committee CEN /TC 256 “Railway applications“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical tex
19、t or by endorsement, at the latest by December 2003, and conflicting national standards shall be withdrawn at the latest by December 2003. This series of European Standards “Railway applications - Measuring of new and modified freight wagons” comprises the following parts: EN 13775-1Part 1:Measuring
20、 principles EN 13775-2Part 2:Freight wagons with bogies EN 13775-3Part 3:Freight wagons with 2 wheelsets prEN 13775-4Part 4:Bogies with 2 wheelsets prEN 13775-5Part 5:Bogies with 3 wheelsets prEN 13775-6Part 6:Tight-coupled freight wagons Annex A is normative, the Annexes B and C are informative. Ac
21、cording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherland
22、s, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or netwo
23、rking permitted without license from IHS -,-,- ? EN 13775-3:2003 (E) 4 Introduction It is normal practice in all European countries to carry out checks and measurements on the major components of new and modified freight wagons and bogies. In view of the importance of uniform criteria for internatio
24、nal transport in all European countries, this European Standard has been prepared. It is recognized that vehicles may be subject to different dimensional checks resulting from the design requirements of the equipment fitted to them when it is not included in this series of standards. 1 Scope This Eu
25、ropean Standard specifies requirements for measuring freight wagons with 2 wheelsets. This ensures that the measuring processes are applied in accordance with uniform criteria. It applies to new and modified freight wagons with 2 wheelsets. Provisions going beyond the scope of these requirements oug
26、ht to be agreed upon by the contracting parties involved. The measuring processes relate to the whole or parts of the underframes with or without add-ons if the geometrical structure does not permit anything else. Where appropriate, other measuring methods not specified here are necessary and ought
27、to be specified in each individual case. Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS
28、-,-,- ? EN 13775-3:2003 (E) 5 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, sub
29、sequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies (including amendments). EN 13775-1:2003Railway applications - Measu
30、ring new and modified freight wagons - Part 1: Measuring principles Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitte
31、d without license from IHS -,-,- ? EN 13775-3:2003 (E) 6 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 13775-1:2003 and the following apply: 3.1 main reference axis of the wagon straight line through the two intersection points of the inter
32、secting arcs of a radius r at the two ends of the wagon. NOTEDetermination of the centre of the wagon is illustrated in measuring process 1. 3.2 distortion distance of the suspension bracket bores to a reference plane running parallel to the underframe of the wagon. 3.3 optional process which is onl
33、y carried out if specially agreed between supplier and the customer. NOTEThe process ought to be ordered separately. 4 Symbols and abbreviated terms SO:top of rail 1:vehicle end 1 2:vehicle end 2 Suspension bracket with bushing Axle guard with hornblock liner 5 Requirements 5.1 General The limit dev
34、iations apply to the finished products in each case. Deviations from this European Standard are permitted as long as they do not include any dimension that represents a hazard to operation. However, they shall be agreed with the relevant contracting party and inspection agency. 5.2 Precondition The
35、precondition for carrying out the measuring processes as specified in this standard is that the principles laid down in EN 13775-1 are adhered to. Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqian
36、g Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-,- ? EN 13775-3:2003 (E) 7 5.3 Measuring processes The control sheet form for documentation of the results of the measuring processes given in annex A shall be used. Measuring process 1 Deter
37、mination and fixing of the main reference axis of the wagon. Shown in the backbone position Key 1Main reference axis of the wagon Figure 1 At each end of the wagon from the opposite centres of the suspension bracket bores on the associated headstock, the intersection points of two intersecting arcs
38、with a radius rshall be determined. The straight line through the two intersection points is the main reference axis of the wagon (see Figure 1). It has to be indicated by clearly visible permanent mark. Measuring process 2 Straightness of the outer surfaces of the underframe in the y-direction. Fig
39、ure 2 The deviation from straightness y1 of the underframe is measured (see Figure 2). Straightness tolerance for y1: 5 mm Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/
40、2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-,- ? EN 13775-3:2003 (E) 8 Measuring process 3 Deviation of the longitudinal members from straight in the z-direction. Figure 3 The deviation z1 of the longitudinal members from straight in the operating position of
41、 the underframe is measured at measuring points 1R, 2R, 3R, 1L, 2L and 3L (see Figure 3). Limit deviations for z1.1 and z1.3: 5 mm for z1.2 for wagons 15 m: 0 5+ mm 15 m: 0 7+ mm The difference in the transverse direction shall not exceed the following values between the right-hand and left-hand sid
42、es: Iz1.1R - z1.1L | 5 mm Iz1.3R - z1.3L | 5 mm These values apply to wagons with no design camber. If design requirements exist, the data in the drawing shall prevail. Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100
43、, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-,- ? EN 13775-3:2003 (E) 9 Measuring process 4 Underframe widths; the distance of the outer surfaces from the main reference axis of the wagon. Figure 4 The distance y2
44、is measured from the main reference axis of the wagon to outer surface of the underframe at measuring points 1R, 2R, 3R, 1L, 2L and 3L (see Figure 4). Limit deviation for y2: + 3 2 mm Measuring process 5 Squareness of the headstocks to the main reference axis of the wagon. Figure 5 The rectangularit
45、y x1 of the headstock to the main reference axis of the wagon is measured in the space between the buffers c at both wagon ends (see Figure 5). Limit deviation for x1: 5 mm relative to C Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Lo
46、c 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-,- ? EN 13775-3:2003 (E) 10 Measuring process 6 Length over headstocks. Figure 6 The total length x2 of the underframe over the headstocks is measured
47、in the main reference axis of the wagon (see Figure 6). Limit deviation for x2: 0 10+ mm Copyright European Committee for Standardization Provided by IHS under license with CENLicensee=Cummins Engine Loc 1,3,4/1232502100, User=liang, xiaoqiang Not for Resale, 12/09/2008 19:46:52 MSTNo reproduction or networking permitted without license from IHS -,-,- ? EN 13775-3:2003 (E) 11 Measuring process 7 Position of the housings for the coupler in the operating p