《BS EN 201-1997(+A1-2000+A2-2005) Rubber and plastics machines — Injection moulding machines — Safety requirements.pdf》由会员分享，可在线阅读，更多相关《BS EN 201-1997(+A1-2000+A2-2005) Rubber and plastics machines — Injection moulding machines — Safety requirements.pdf（52页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 201:1997 Incorporating Amendments Nos. 1 and 2 Rubber and plastics machines Injection moulding machines Safety requirements The European Standard EN 201:1997, with the incorporation of amendments A1:2000 and A2:2005, has the status of a British Standard ICS 83.200 Licensed Cop
2、y: Institute Of Technology Tallaght, Institute of Technology, Sun Aug 06 01:08:30 BST 2006, Uncontrolled Copy, (c) BSI BS EN 201:1997 This British Standard, having been prepared under the direction of the Engineering Sector Board, was published under the authority of the Standards Board and comes in
3、to effect on 15 July 1997 BSI 27 March 2006 The following BSI references relate to the work on this standard: Committee reference MCE/3/2 Draft for comment 96/703746 DC ISBN 0 580 27947 2 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Techn
4、ical Committee MCE/3, Safety of machinery, to Subcommittee MCE/3/2, Rubber and plastics machine Safety, upon which the following bodies were represented: British Footwear Manufacturers Federation British Plastics Federation Packaging and Industrial Films Association Plastics Machinery Distribution A
5、mendments issued since publication Amd. No.DateComments 10932February 2001See national foreword 15766March 2006See national foreword Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Aug 06 01:08:30 BST 2006, Uncontrolled Copy, (c) BSI BS EN 201:1997 BSI 27 March 2006i Co
6、ntents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 2014 Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Aug 06 01:08:30 BST 2006, Uncontrolled Copy, (c) BSI BS EN 201:1997 ii BSI 27 March 2006 National foreword This British Sta
7、ndard is the official English language version of EN 201:1997, including Amendment Nos. 1 and 2, Rubber and plastics machines Injection moulding machines Safety requirements. It supersedes BS 6679:1985 which is withdrawn. The start and finish of text introduced or altered by CEN amendment is indicat
8、ed in the text by tags ?. Tags indicating changes to CEN text carry the number of the amendment. For example, text altered by CEN amendment A1 is indicated by ?. The UK participation in its preparation was entrusted to by Technical Committee MCE/3, Safety of machinery, to Subcommittee MCE/3/2, Rubbe
9、r and plastics machine Safety, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be foun
10、d in the BSI Catalogue under the section entitled “ International Standards Correspondence Index” , or by using the “ Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are re
11、sponsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and kee
12、p UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, pages i to ii, the EN title page, pages 2 to 47 and a back cover. The BSI copyright notice displayed in this
13、document indicates when the document was last issued. Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Sun Aug 06 01:08:30 BST 2006, Uncontrolled Copy, (c) BSI ? EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 201 February 1997 + A1 February 2000 + A2 July 2005 ICS 83.2
14、00Supersedes EN 201:1985 + A1:2000 + A2:2005 Descriptors: Plastic moulding, rubber, injection machines, accident prevention, safety requirements, equipment specifications, design, dangerous areas, hazards, safety measures, safety devices, inspection, human factors engineering English version Rubber
15、and plastics machines Injection moulding machines Safety requirements (includes amendments A1:2000 and A2:2005) Machines pour le caoutchouc et les matires plastiques Machines injecter Prescriptions de scurit (inclut les amendements A1:2000 et A2:2005) Gummi- und Kunststoffmaschinen Spritzgiemaschine
16、n Sicherheitsanforderungen (enthlt nderungen A1:2000 und A2:2005) This European Standard was approved by CEN on 1996-10-12. Amendment A1 was approved by CEN on 3 January 2000 and amendment A2 was approved by CEN on 20 June 2005. CEN members are bound to comply with the CEN/ CENELEC Internal Regulati
17、ons which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Europ
18、ean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the natio
19、nal standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CEN
20、European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 Copyright reserved to CEN members Ref. No. EN 201:1997 + A1:2000 + A2:2005 E Licensed Copy: Institute Of Technology Tallaght, Institute o
21、f Technology, Sun Aug 06 01:08:30 BST 2006, Uncontrolled Copy, (c) BSI ? EN 201:1997 BSI 27 March 2006 2 Foreword This European Standard has been prepared by Technical Committee CEN/TC 145, Rubber and plastics machines Safety, the secretariat of which is held by UNI. This European Standard shall be
22、given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 1997, and conflicting national standards shall be withdrawn at the latest by August 1997. This European Standard has been prepared under a mandate given to CEN by the Europe
23、an Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard. In addition to the previous version of EN 201, requirements for carousel machine
24、s, shuttle and turntable machines, and multistation machines with mobile injection unit, are included. Furthermore safety requirements for the interaction between injection moulding machines and ancillary equipment are specified. According to the CEN/CENELEC Internal Regulations, the national standa
25、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment 1 This
26、 Amendment EN 201:1997/A1:2000 to EN 201:1997 has been prepared by Technical Committee CEN/TC 145, Rubber and plastics machines Safety, the secretariat of which is held by UNI. This Amendment to the European Standard EN 201:1997 shall be given the status of a national standard, either by publication
27、 of an identical text or by endorsement, at the latest by August 2000, and conflicting national standards shall be withdrawn at the latest by August 2000. This Amendment to the European Standard EN 201:1997 has been prepared under a mandate given to CEN by the European Commission and the European Fr
28、ee Trade Association, and supports essential requirements of EU Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France,
29、Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. This Amendment updates the requirements related to safety distances. Foreword to amendment 2 This European Standard (EN 201:1997/A2:2005) has been prepared by Techn
30、ical Committee CEN/TC 145 “ Plastics and rubber machines” , the secretariat of which is held by UNI. This Amendment to the European Standard EN 201:1997 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2006, and
31、conflicting national standards shall be withdrawn at the latest by January 2006. This amendment updates EN 201:1997 with regard to injection moulding machines with one or more electrical axes. The following movements, driven by an electrical axis, are not considered: vertical movements of the platen
32、; horizontal movements of the platen where the guards for the mould area are not interlocking guards with guard locking. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium,
33、 Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Institute Of Technology Tallag
34、ht, Institute of Technology, Sun Aug 06 01:08:30 BST 2006, Uncontrolled Copy, (c) BSI ? EN 201:1997 BSI 27 March 20063 Contents Page Foreword2 0Introduction4 1Scope4 2Normative references4 3Terms and definitions6 4List of significant hazards10 5Safety requirements and/or measures14 6Verification of
35、the safety requirements and/or measures28 7Information for use29 Annex A (normative) Additional requirements for protection devices type III32 Annex B (informative) Use of proportional valves for the platen movement33 Annex C (normative) Single acknowledgement system33 Annex D (normative) Noise meas
36、urement for injection moulding machines34 Annex E (normative) Size indication of injection moulding machines36 Annex F (normative) Test block37 Annex G (normative) Interlocking of guards for injection moulding machines with one or more electrical axes40 G.1 Principle of interlocking corresponding to
37、 type III, using electromechanical components40 G.2 Principle of interlocking corresponding to type III, using one electromechanical component and the motor control unit41 G.3 Principle of interlocking corresponding to type III, using the motor control unit42 G.4 Principle of interlocking correspond
38、ing to type I, using one electromechanical component43 G.5 Principle of interlocking corresponding to type I, using the motor control unit44 G.6 Principle of interlocking corresponding to type II, using one electromechanical component 45 G.7 Principle of interlocking corresponding to type II, using
39、the motor control unit46 Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU Directives47 Figure 1 Example of a carousel machine7 Figure 2 Examples of shuttle table machines shown without guards for the movements of the table8 Figure 3
40、 Example of a turntable machine shown without guards for the movements of the table8 Figure 4 Examples of multistation machines with mobile plasticizing and injection units9 Figure 5 Injection moulding machine with horizontal clamping unit and horizontal plasticizing and injection unit, shown withou
41、t guards12 Figure 6 Injection moulding machine with vertical clamping unit and horizontal plasticizing and injection unit, shown without guards12 Figure 7 Protection devices types I, II, III16 Figure 8 Examples of the positioning of movable guards and dimensions e1, e2 for machines with tiebars18 Fi
42、gure 9 Dimensions a, e1, e2 for tiebarless machines21 Figure 10 Dimensions of the discharge area22 Figure D.1 Injection moulding machine with vertical clamping unit (plan view)34 Figure D.2 Injection moulding machine with horizontal clamping unit (plan view)34 Figure F.1 Hollow cylinder type test bl
43、ock37 Figure F.2 Four bar type test block37 Figure G.1 Principle of interlocking corresponding to type III, using electromechanical components40 Figure G.2 Principle of interlocking corresponding to type III, using one electromechanical component and the motor control unit41 Figure G.3 Principle of
44、interlocking corresponding to type III, using the motor control unit42 Figure G.4 Principle of interlocking corresponding to type I, using one electromechanical component43 Figure G.5 Principle of interlocking corresponding to type I, using the motor control unit44 Figure G.6 Principle of interlocki
45、ng corresponding to type II, using one electromechanical component45 Figure G.7 Principle of interlocking corresponding to type II, using the motor control unit46 Table 1 Verification methods29 Table D.1 Machine data for test cycle35 Table F.1 Test block dimensions (mm)38 Licensed Copy: Institute Of
46、 Technology Tallaght, Institute of Technology, Sun Aug 06 01:08:30 BST 2006, Uncontrolled Copy, (c) BSI ? BS EN 201:1997 4 BSI 27 March 2006 0 Introduction This European standard is a type C standard as defined in EN 292-1:1991 and has been elaborated by CEN/ TC145/WG1. The extent to which hazards a
47、re covered is indicated in the scope of this standard. In addition, machinery shall comply, as appropriate, with EN 292 for hazards which are not covered by this standard. 1 Scope This standard specifies the essential safety requirements for injection moulding machines for the processing of plastics
48、 and/or rubber. All hazards listed in clause 4 are covered by this standard. The following machines are excluded: machines on which the clamping unit can only be operated by the physical force of the operator; machines for reaction injection moulding (RIM, see prEN 1612-1 and prEN 1612-2); compressi
49、on and transfer moulding machines (see EN 289); direct on sole injection moulding machines and full boot injection moulding machines (Wellington type boots with textile inserts) (see prEN 1845). The safety requirements for the interaction between injection moulding machines and ancillary equipment are specified. The safety requirements for the ancillary equipment itself are not specified. This standard does not co