《BS EN 153-2006 Methods of measuring the EN ergy consumption.pdf》由会员分享，可在线阅读，更多相关《BS EN 153-2006 Methods of measuring the EN ergy consumption.pdf（20页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 153:2006 Incorporating corrigendum no. 1 Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics The European Standard EN 153:20
2、06 has the status of a British Standard ICS 97.040.30 ? BS EN 153:2006 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 September 2006 BSI 2007 ISBN 0 580 49256 7 National foreword This British Standard was published by BSI. It is the UK im
3、plementation of EN 153:2006. It supersedes BS EN 153:1996 which will be withdrawn on 31 July 2008. The UK participation in its preparation was entrusted to Technical Committee RHE/5, Household refrigerators and food freezers. A list of organizations represented on RHE/5 can be obtained on request to
4、 its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments 1684
5、7 Corrigendum No. 1 31 January 2007 Addition of supersession details EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 153 February 2006 ICS 97.040.30Supersedes EN 153:1995 English Version Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food
6、storage cabinets, food freezers and their combinations, together with associated characteristics Mthodes de mesure de la consommation dnergie lectrique et des caractristiques associes des rfrigrateurs, conservateurs de denres congeles et conglateurs mnagers et de leurs combinaisons Verfahren zur Mes
7、sung der Aufnahme elektrischer Energie und damit zusammenhngender Eigenschaften fr netzbetriebene Haushalt-Khlgerte, Tiefkhlgerte, Gefriergerte und deren Kombinationen This European Standard was approved by CEN on 28 December 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regula
8、tions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Eur
9、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the nat
10、ional standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Ki
11、ngdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 153:2006: E EN 1
12、53:2006 (E) 2 Contents page Foreword 4 Introduction5 1 Scope.6 2 Normative references .6 3 Terms and definitions.6 4 Classification and symbols6 5 Design6 6 Storage temperatures.6 7 Determination of linear dimensions, volumes and areas 6 8 General test conditions6 9 Testing the air-tightness of door
13、, lid or drawer seal (s).7 10 Testing the opening force of doors or lids7 11 Testing the durability of doors, lids and drawers.7 12 Testing the mechanical strength of shelves and similar components .7 13 Testing the storage temperatures7 14 Water vapour condensation test7 15 Energy consumption test.
14、7 16 Temperature rise test8 17 Freezing test8 18 Ice-making test8 19 Final test report.8 20 Designation .8 21 Marking8 22 Technical and commercial product information.9 23 Instructions for users .9 Annex A (informative) Particular conditions for various countries10 Annex B (informative) Percentage r
15、unning time.11 Annex C (informative) Test for absence of odour and taste12 Annex D (normative) Built-in refrigerating appliances 13 Annex E (normative) Rated characteristics and control procedure14 E.1 Volumes and areas .14 E.1.1 Rated gross volume14 E.1.2 Rated storage volume.14 E.1.3 Rated storage
16、 shelf area 14 E.1.4 Control procedure.14 E.2 Performance characteristics14 E.2.1 Storage temperatures.14 E.2.2 Freezing capacity15 E.2.3 Energy consumption 15 E.2.4 Ice making .15 w w w . b z f x w . c o m EN 153:2006 (E) 3 E.2.5 Temperature rise time.15 Bibliography.16 w w w . b z f x w . c o m EN
17、 153:2006 (E) 4 Foreword This European Standard (EN 153:2006) has been prepared by Technical Committee CEN/TC 44 “Household refrigerating appliances and commercial refrigeration equipment”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standa
18、rd, either by publication of an identical text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at the latest by August 2006. This European Standard supersedes EN 153:1995. The significant changes compared to the document to be revised are the fo
19、llowing: rated voltage to test the refrigerating appliances is changed from 220 V to 230 V; correction formula on the energy consumption measured value within the specified range of test temperature is changed from 24,5 C to 25,5 C; addition of a normative annex on built-in refrigerating appliances;
20、 addition of reference to Directives 94/2/EC and 92/75/EEC; editorial modifications to be consistent with EN ISO 15502. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium,
21、Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. w w w . b z f x w . c o m EN 153:2006
22、 (E) 5 Introduction Energy saving is the most important parameter in the European plans for the reduction of the greenhouse effect. It is necessary to assess the energy saving by standardised methods of measurement of the energy consumption and of its associated characteristics. In this context, ref
23、erence to this European Standard is mentioned in the Commissions Directive 94/2/EC of 21 January 1994 as amended by Commission Directive 2003/66/EC of 3 July 20031 implementing Council Directive 92/75/EEC2 with regard to energy labelling of household electric refrigerators, freezers and their combin
24、ations. This European Standard specifies the test method to be applied in accordance with these Directives. It also defines permitted tolerances to values declared by the manufacturer and control procedures for checking these declared values. For household refrigerators, household frozen food storag
25、e cabinets and their combinations these methods are specified in EN ISO 15502. As EN ISO 15502 has a wider field of application, the revision of EN 153:1995 has become necessary to conform its requirements to the European Legislation on rational use of energy. w w w . b z f x w . c o m EN 153:2006 (
26、E) 6 1 Scope This European Standard specifies the methods for measuring the energy consumption of electric mains operated household refrigerating appliances, together with associated characteristics. This European Standard is not concerned with safety. 2 Normative references The following referenced
27、 documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 15502:2005, Household refrigerating appliances Characteri
28、stics and test methods (ISO 15502:2005) 3 Terms and definitions For the purposes of this European Standard, terms and definitions given in EN ISO 15502:2005 apply. 4 Classification and symbols For the purposes of this European Standard, the classification and symbols given in Clause 4 of EN ISO 1550
29、2:2005 apply. 5 Design For the purposes of this European Standard, 5.1 and 5.6 of EN ISO 15502:2005 shall apply. 6 Storage temperatures For the purposes of this European Standard, Clause 6 of EN ISO 15502:2005 shall apply. 7 Determination of linear dimensions, volumes and areas For the purposes of t
30、his European Standard, Clause 7 of EN ISO 15502:2005 shall apply. 8 General test conditions For the purposes of this European Standard, Clause 8 of EN ISO 15502:2005 shall apply except for the following: 8.2 b): to be replaced by the following text: b) for checking the energy consumption and if any
31、temperature rise time, freezing capacity and ice-making capacity of all refrigerating appliances: +25 C for classes SN, class N, class ST and class T refrigerating appliances. NOTE This is to enable direct comparison between all climate class refrigerating appliances. 8.6.3.1: to be replaced by the
32、following text: w w w . b z f x w . c o m EN 153:2006 (E) 7 The refrigerating appliance with a rated voltage within the range between 220 V and 240 V shall be tested at 230 V 1 % with a frequency of 50 Hz 1 %. 9 Testing the air-tightness of door, lid or drawer seal(s) For the purpose of this Europea
33、n Standard, Clause 9 of EN ISO 15502:2005 does not apply. 10 Testing the opening force of doors or lids For the purpose of this European Standard, Clause 10 of EN ISO 15502:2005 does not apply. 11 Testing the durability of doors, lids and drawers For the purpose of this European Standard, Clause 11
34、of EN ISO 15502:2005 does not apply. 12 Testing the mechanical strength of shelves and similar components For the purpose of this European Standard, Clause 12 of EN ISO 15502:2005 does not apply. 13 Testing the storage temperatures For the purposes of this European Standard, Clause 13 of EN ISO 1550
35、2:2005 shall apply. 14 Water vapour condensation test For the purposes of this European Standard, Clause 14 of EN ISO 15502:2005 does not apply. 15 Energy consumption test For the purposes of this European Standard, Clause 15 of EN ISO 15502 shall apply except for the following: 15.1 Note to 15.1 sh
36、all be deleted 15.2.1 Replacement The ambient temperature shall be in accordance with 8.2. When the measured ambient temperature deviates from the nominal (+ 25 C) ambient temperatures up to 0,5 K, the following first order correction on the measured energy consumption shall be made: = = n i i iaa i
37、 meascorr V V tt t PP 1 )( )25( where P is the energy consumption kW/24h; ti is the nominal compartment temperature, e.g. 5 C (see Table 4); w w w . b z f x w . c o m EN 153:2006 (E) 8 Vi is the net volume compartment i dm3; V is the total net volume dm3; taa is the measured ambient temperature. 16
38、Temperature rise test For the purposes of this European Standard, Clause 16 of EN ISO 15502:2005 shall apply. 17 Freezing test For the purposes of this European Standard, Clause 17 of EN ISO 15502:2005 shall apply. 18 Ice-making test For the purposes of this European Standard, Clause 18 of EN ISO 15
39、502:2005 shall apply. 19 Final test report For the purposes of this European Standard, Clause 19 of EN ISO 15502:2005 is replaced by the following text: The final test report shall comprise the measurements and test results of the following: a) overall space required in use; b) total gross volume(s)
40、 (see Clause 7); c) storage volume(s) (see Clause 7); d) total storage volume (see Clause 7); e) defrosting type for each compartment, except for frost free refrigerating appliances; f) storage temperature test (see Clause 13); g) energy consumption test (see Clause 15); h) temperature rise test (se
41、e Clause 16); i) freezing test (see Clause 17); j) ice-making test (see Clause 18). 20 Designation For the purposes of this European Standard, Clause 20 of EN ISO 15502:2005 shall apply. 21 Marking For the purposes of this European Standard, Clause 21 of EN ISO 15502:2005 shall apply. EN 153:2006 (E
42、) 9 22 Technical and commercial product information For the purposes of this European Standard, Clause 22 of EN ISO 15502:2005 shall apply. 23 Instructions for users For the purposes of this European Standard, Clause 23 of EN ISO 15502:2005 shall apply. EN 153:2006 (E) 10 Annex A (informative) Parti
43、cular conditions for various countries For the purpose of this European Standard, Annex A of EN ISO 15502:2005 does not apply. EN 153:2006 (E) 11 Annex B (informative) Percentage running time For the purpose of this European Standard, Annex B of EN ISO 15502:2005 applies. EN 153:2006 (E) 12 Annex C
44、(informative) Test for absence of odour and taste For the purpose of this European Standard, Annex C of EN ISO 15502:2005 does not apply. EN 153:2006 (E) 13 Annex D (normative) Built-in refrigerating appliances Refrigerating appliances intended only for building-in or for placing under a counter or
45、under a worktop, or between cabinets (under-counter types), shall be built-in or placed in a test enclosure of dull black painted, approximately 20 mm thick, plywood, with door(s) dimensions in accordance to manufacturers specifications. If a manufacturer requires a facia door, it shall be fitted. T
46、he inner dimensions of the test enclosure shall comply with the manufacturers instructions. If a range of dimensions are given, than the smallest values are used. If this data is not given, the inner dimensions of the test enclosure are as follows: The inner depth to exceed by 20 mm to 50 mm the ove
47、rall depth of the refrigerating appliance, and shall not be more than 550 mm. The inner width to exceed by 4 mm to 6 mm the overall width of the refrigerating appliance. The inner height to exceed by 2 mm to 4 mm the overall height of the refrigerating appliance. If necessary, the test enclosure sha
48、ll be provided with ventilating openings according to the manufacturers instructions. The refrigerating appliance shall be built-in or placed in the test enclosure according to the manufacturers instructions such that only its door projects beyond the front edges of the enclosure. If the refrigerati
49、ng appliance is provided with spacers, strips or other special means of solid or resilient material for closing the gap between the contours of the refrigerating appliance and the cabinet or enclosure, these means shall be used accordingly. If such means are not provided, the gaps between the test enclosure and the refrigerating appliance are left open. The back partition shall be in close contact with the side of the test enclos