《BS EN 54-4-1998 火灾探测和火灾警报系统.供电设备.pdf》由会员分享，可在线阅读，更多相关《BS EN 54-4-1998 火灾探测和火灾警报系统.供电设备.pdf（30页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 54-4:1998 Incorporating Amendments Nos. 1 and 2 Fire detection and fire alarm systems Part 4: Power supply equipment The European Standard EN 54-4:1997, with the incorporation of amendment A1:2002 and A2:2006, has the status of a British Standard ICS 13.220.20 ? Licensee=Naval
2、 Aviation Depot/5918326100 Not for Resale, 01/15/2008 08:22:22 MST -,-,- BS EN 54-4:1998 This British Standard, having been prepared under the direction of the Health and Environment Sector Board, was published under the authority of the Standards Board and comes into effect on 15 March 1998 BSI 200
3、6 ISBN 0 580 29426 9 National foreword This British Standard is the English language version of EN 54-4:1997, including amendments A1:2002 and A2:2006. Together with BS EN 54-2:1997, it supersedes BS 5839-4:1988 which is withdrawn. It is one of a series of standards for fire detection and fire alarm
4、 systems (see BS EN 54-1 for a full list of current and proposed standards). The start and finish of text introduced or altered by amendment is indicated in the text by tags ?. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is
5、 indicated by ?.? The UK participation in its preparation was entrusted by Technical Committee FSH/12, Fire detection and alarm systems, to Subcommittee FSH/12/3, Control and indicating equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtain
6、ed on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “ International Standards Correspondence Index” , or by using the “ Search” facility
7、 of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. a
8、id enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document c
9、omprises a front cover, an inside front cover, the EN title page, pages 2 to 24, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 1459627 August 2003See na
10、tional foreword 1667631 October 2006See national foreword Licensee=Naval Aviation Depot/5918326100 Not for Resale, 01/15/2008 08:22:22 MST EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 54-4 October 1997 +A1 December 2002 +A2 August 2006 ICS 13.220.20 Descriptors: Fire equipment, fire detectio
11、n systems, automatic equipment, safety devices, electric power supply, specifications, tests, inspection, testing conditions, marking English version Fire detection and fire alarm systems Part 4: Power supply equipment Systmes de dtection et d alarme incendie Partie 4: Equipement d alimentation lect
12、rique Brandmeldeanlagen Teil 4: Energieversorgungseinrichtungen This European Standard was approved by CEN on 25 December 1996. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard
13、 without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other langu
14、age made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, I
15、celand, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 CEN All righ
16、ts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 54-4:1997 E Licensee=Naval Aviation Depot/5918326100 Not for Resale, 01/15/2008 08:22:22 MST EN 54-4:1997 BSI 2006 2 Foreword This European Standard has been prepared by Technical Committee CEN/T
17、C 72, Fire detection and fire alarm systems, the Secretariat of which is held by BSI. This standard has been prepared in co-operation with the CEA (Comit Europen des Assurances) and with EURALARM (Association of European Manufacturers of Fire and Intruder Alarm Systems). EN 54 is published in a seri
18、es of parts. Information on the relationship between this European Standard and other standards of the EN 54 series is given in Annex A of EN 54-1. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by
19、April 1998, and conflicting national standards shall be withdrawn at the latest by August 1999. In addition, a further 36 months shall be allowed for certification purposes for equipment conforming to the national standard. According to the CEN/CENELEC Internal Regulations, the national standards or
20、ganizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendm
21、ent A1 This document (EN 54-4:1997/A1:2002) has been prepared by Technical Committee CEN/TC 72, Fire detection and fire alarm systems, the Secretariat of which is held by BSI. This amendment to the European Standard EN 54-4:1997 shall be given the status of a national standard, either by publication
22、 of an identical text or by endorsement, at the latest by June 2003, and conflicting national standards shall be withdrawn at the latest by December 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports ess
23、ential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European
24、Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A2 This document (EN 54-4:1997/A2:2006) has been prepared by Tech
25、nical Committee CEN/TC 72, Fire detection and fire alarm systems, the Secretariat of which is held by BSI. This amendment to the European Standard EN 54-4:1997 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 20
26、07, and conflicting national standards shall be withdrawn at the latest by August 2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Di
27、rective(s), see informative Annex ZA which is an integral part of this document. Amendment 2 to this standard improves the additional requirements for integrated power supplies and makes a number of miscellaneous changes, to correct errors and better reflect the current state of the art. It also rep
28、laces the descriptions of the individual electromagnetic compatibility immunity tests with a reference to the EMC Product Family standard EN 50130-4, makes editorial changes to generally improve clarity and updates the normative references. According to the CEN/CENELEC Internal Regulations, the nati
29、onal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po
30、rtugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensee=Naval Aviation Depot/5918326100 Not for Resale, 01/15/2008 08:22:22 MST -,-,- ? EN 54-4:1997 BSI 2006 3 Contents Page Foreword2 Introduction4 1Scope4 2Normative references4 3Definitions and abbreviations5 3.
31、1Terms and definitions5 3.2Abbreviations5 4General requirements5 4.1Conformity5 4.2Power sources5 5Functions6 5.1Power supply from the main power source6 5.2Power supply from the standby power source (battery)6 5.3Charger6 5.4Faults7 6Materials, design and manufacture7 6.1Manufacturer s declaration7
32、 6.2Mechanical design7 6.3Electrical design7 6.4Power supply interface7 7Documentation8 7.1User s documentation8 7.2Design documentation8 8Marking8 9Tests9 9.1General9 9.2Functional tests9 9.3Test of the charger and the standby power source11 9.4Environmental tests12 9.5Cold (operational)13 9.6Damp
33、heat, steady state (operational)13 9.7Impact (operational)14 9.8Vibration, sinusoidal (operational)14 9.9Electromagnetic Compatibility (EMC), Immunity tests (operational)15 9.10 (deleted)16 9.11 (deleted)16 9.12 (deleted)16 9.13 (deleted)16 9.14 Damp heat, steady state (endurance)16 9.15 Vibration,
34、sinusoidal (endurance)17 Annexes Annex A (normative) Laboratory procedure for testing compliance with the requirements of 5.2.1 and 5.4.c18 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directives (89/106/EEC)20 Bibliography27 Lice
35、nsee=Naval Aviation Depot/5918326100 Not for Resale, 01/15/2008 08:22:22 MST -,-,- ? EN 54-4:1997 4 BSI 2006 Introduction This European Standard is drafted on the basis of functions which are to be provided on all power supply equipment. The power supply equipment may have its own cabinet, or may be
36、 housed with other equipment of the fire detection and fire alarm system, such as the control and indicating equipment of EN 54-2. A fire detection and fire alarm system may use more than one power supply equipment. 1 Scope ?This European Standard specifies requirements, methods of test and performa
37、nce criteria for power supply equipment of fire detection and fire alarm systems installed in buildings. This includes component L of Figure 1 of EN 54-1:1996 and power supply equipment that supplies power directly to components other than the control and indicating equipment, unless otherwise speci
38、fied in other Parts of EN 54.? 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, sub
39、sequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. ?EN 54-1:1996, Fire detection and fire alarm systems Part 1: Introd
40、uction EN 54-2:1997, Fire detection and fire alarm systems Part 2: Control and indicating equipment EN 54-7:2000, Fire detection and fire alarm systems Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionization EN 50130-4:1995, Alarm systems Part 4: Electromagneti
41、c compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems EN 60068-1:1994, Environmental testing Part 1: General and guidance (IEC 60068-1:1988 + corr. October 1988 + A1:1992) EN 60068-2-1:1993, Environmental testing; part 2: tests; test
42、s A: cold (IEC 60068-2-1:1990) EN 60068-2-6:1995, Environmental testing Part 2: Tests Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:1995 + Corrigendum 1995) EN 60068-2-47:2005, Environmental testing Part 2-47: Test Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-4
43、7:2005) EN 60068-2-75:1997, Environmental testing Part 2-75: Tests Test Eh: Hammer tests (IEC 60068-2-75:1997) EN 60068-2-78:2001, Environmental testing Part 2-78: Tests Test Cab: Damp heat, steady state (IEC 60068-2-78:2001) EN 60529:1991, Degrees of protection provided by enclosures (IP code) (IEC
44、 60529:1989) EN 60721-3-3:1995, Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 3: Stationary use at weatherprotected locations (IEC 60721-3-3:1994) ? Licensee=Naval Aviation Depot/5918326100 Not for Resale, 01/15/2
45、008 08:22:22 MST ? EN 54-4:1997 BSI 2006 5 3 Definitions and abbreviations ?3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN 54-1:1996 and the following apply. 3.1.1 final voltage lowest voltage, specified by the battery manufacturer, to which a batt
46、ery should be discharged 3.1.2 fully charged voltage highest voltage which characterises a fully charged battery as specified by the battery manufacturer 3.1.3 I max. a rated maximum output current which can be supplied continuously 3.1.4 I max. b rated maximum output current higher than I max. a, w
47、hich can be supplied while battery charging is not required 3.1.5 integrated PSE PSE within other equipment where it is not possible for the manufacturer to specify the output voltage range(s) of the PSE and the input voltage range(s) of that equipment and where its repair involves replacement of a
48、part or the whole of the other equipment? 3.2 Abbreviations For the purposes of this European Standard the following abbreviations apply. 4 General requirements 4.1 Conformity In order to conform to this standard, the ?PSE? shall meet the requirements of Clauses 4, 5, 6, 7 and 8, shall be tested as described in Clause 9 and shall meet the requirements of the tests. ?4.2 Power sources 4.2.1 The PSE shall have at least two power sources, a main power source and a standby power source. 4.2.2 The main power source shall be designed to operate from the public electricity supp