《AS 2505-4-2002 Metallic materials Method 4 Wire—Reverse bend test.pdf》由会员分享，可在线阅读，更多相关《AS 2505-4-2002 Metallic materials Method 4 Wire—Reverse bend test.pdf（9页珍藏版）》请在三一文库上搜索。
1、AS 2505.42002 ISO 7801:1984 i Australian Standard TM Metallic materials Method 4: WireReverse bend test PREFACE This Standard was prepared by Standards Australia Committee MT-006, Mechanical Testing of Metals to supersede in part AS 2505.41981, Methods for bend and related testing of metals, Method
2、4: Wire. This Standard is identical with and has been reproduced from ISO 7801:1984, Metallic materialsWireReverse bend test. This Standard is Method 4 of a series of Standards on the methods of bending wire and related testing of metals. The series comprises the following Methods: AS 2505Metallic m
3、aterials 2505.1Method 1:Sheet, strip and plate 2505.2Method 2:Bars, rods and solid shapes 2505.3Method 3:Tubular products 2505.4Method 4:WireReverse bend test 2505.5Method 5:WireSimple torsion test 2505.6Method 6:WireWrapping test As this Standard is reproduced from an International Standard, the fo
4、llowing applies: (a) Its number does not appear on each page of text and its identity is shown only on the cover and title page. (b) In the source text, this International Standard should read this Australian Standard. (c) A full point substitutes for a comma when referring to a decimal marker. AS 2
5、505.4 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 ii NOTES Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 1 .au Standards Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 2 .au Standards Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 3 .au
6、 Standards Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 4 .au Standards Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 NOTES 5 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 6 This Australian Standard was prepared by Committee MT-006, Mechanical Te
7、sting of Metals. It was approved on behalf of the Council of Standards Australia on 17 May 2002 and published on 20 May 2002. The following interests are represented on Committee MT-006: Australasian Railway Association Australian Aluminium Council Australian Industry Group Bureau of Steel Manufactu
8、rers of Australia CSIRO Institute of Materials Engineering Australasia NATA Keeping Standards up-to-date Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Betw
9、een editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased. Detailed information about Standards can be f
10、ound visiting the Standards Australia web site at .au and looking up the relevant Standard in the on-line catalogue. Alternatively, the printed Catalogue provides information current at 1 January each year, and the monthly magazine, The Australian Standard, has a full listing of revisions and amendm
11、ents published each month. We also welcome suggestions for the improvement in our Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Contact us via email at .au, or write to the Chief Executive, Standards Australia International Ltd, GPO
12、 Box 5420, Sydney, NSW 2001. Originated as AS 2505.41981. Second edition 2002. This Standard was issued in draft form for comment as DR 02089. COPYRIGHT Standards Australia International All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic
13、 or mechanical, including photocopying, without the written permission of the publisher. Published by Standards Australia International Ltd GPO Box 5420, Sydney, NSW 2001, Australia ISBN 0 7337 4534 2Printed in Australia Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 This page has been left blank intentionally. Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007