《BS EN 13164-2008 Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification.pdf》由会员分享，可在线阅读，更多相关《BS EN 13164-2008 Thermal insulation products for buildings — Factory made products of extruded polystyrene foam (XPS) — Specification.pdf（46页珍藏版）》请在三一文库上搜索。
1、? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? BS EN 13164:2008 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13164 November 2008 ICS 91.100.60Supersedes EN 13164:2001 English Version Thermal insulation products for buildings - Factory made products of extruded polystyrene
2、foam (XPS) - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse de polystyrne extrud (XPS) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation This European Standard was approved by CE
3、N on 12 October 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard
4、s may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to t
5、he CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth
6、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CENAll rights of exploitatio
7、n in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13164:2008: E BS EN 13164:2008 EN 13164:2008 (E) 2 Contents Page Foreword 4 1Scope 6 2Normative references 6 3Terms, definitions, symbols, units, abbreviated terms .7 3.1Terms and definitions .7 3.2Symbols, units
8、 and abbreviated terms 8 4Requirements 10 4.1General . 10 4.2For all applications . 10 4.3For specific applications 14 5Test methods . 17 5.1Sampling 17 5.2Conditioning 17 5.3Testing . 17 6Designation code 19 7Evaluation of Conformity . 19 8Marking and labelling . 20 Annex A (normative) Determinatio
9、n of the declared values of thermal resistance and thermal conductivity . 21 A.1General . 21 A.2Input data . 21 A.3Declared values. 21 Annex B (normative) Factory Production Control . 23 Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity . 26 C.1Scope
10、 . 26 C.2Procedure for XPS foam without diffusion tight laminates 26 C.3Procedure for XPS foam for use with diffusion tight facings on both sides 27 C.4Calculation of aged value 28 C.5Blowing agent . 29 C.6Product grouping 29 Annex D (informative) Additional Properties . 30 D.1General . 30 D.2Behavi
11、our under cyclic loading 30 D.3Compressive modulus of elasticity 30 D.4Bending strength 30 D.5Shear strength . 30 D.6Determination of volume percentage of closed cells . 31 Annex E (informative) Plan for cutting test specimen 32 Annex ZA (informative) Clauses of this European Standard addressing the
12、 provisions of the EU Construction Products Directive. 34 ZA.1Scope and relevant characteristics 34 ZA.2Procedures for attestation of conformity of extruded polystyrene foam products . 36 ZA.3CE Marking and labelling . 40 ? BS EN 13164:2008 EN 13164:2008 (E) 3 Bibliography 42 Tables Table 1 Toleranc
13、es of length, width, squareness and flatness . 11 Table 2 Classes for thickness tolerances . 12 Table 3 Levels for compressive stress or compressive strength. 13 Table 4 Levels for deformation under specified compressive load and temperature conditions . 14 Table 5 Levels for tensile strength, perpe
14、ndicular to faces 15 Table 6 Levels for long term water absorption by total immersion 16 Table 7 Levels for long term water absorption by diffusion . 16 Table 8 Levels for freeze thaw resistance . 16 Table 9 Test methods, test specimens and conditions . 18 Table A.1 Values of k for one sided 90 % to
15、lerance interval with a confidence level of 90 % . 22 Table B.1 Minimum product testing frequencies 23 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 24 Table D.1 Test methods, test specimens, conditions and minimum testing frequencies . 31 Table ZA.1 Relevant
16、 clauses for Extruded polystyrene foam and intended use 35 Table ZA.2 Systems of attestation of conformity . 36 Table ZA.3 Assignment of evaluation of conformity tasks for products under system 1 . 37 Table ZA.4 Assignment of evaluation of conformity tasks for products under system 3 or system 3 com
17、bined with system 4 for reaction to fire 38 ? BS EN 13164:2008 EN 13164:2008 (E) 4 Foreword This document (EN 13164:2008) has been prepared by Technical Committee CEN/TC 88 “ Thermal insulating materials and products” , the secretariat of which is held by DIN. This European Standard shall be given t
18、he status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. This document has been prepared under a mandate given to CEN by the European Commission and the
19、European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Directive(s), see informative Annex ZA, which is an integral part of this document. Attention is drawn to the possibility that some of the elements of this document may be the subject of
20、 patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13164:2001. This document is one of a series of standards for insulating products used in buildings, but this standard may be used in other areas where appropri
21、ate. In pursuance of resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products; all of which
22、 come within the scope of CEN/TC88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made products of expanded polystyrene (EPS) Specification EN 13164, Thermal insulation products fo
23、r buildings Factory made products of extruded polystyrene foam (XPS) Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PUR) products Specification EN 13166, Thermal insulation products for buildings Factory made products of phenolic foam (PF) Spe
24、cification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made products of e
25、xpanded perlite (EPB) Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification ? BS EN 13164:2008 EN 13164:2008 (E) 5 EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification According
26、to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li
27、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. ? BS EN 13164:2008 EN 13164:2008 (E) 6 1 Scope This European Standard specifies the requirements for factory made products of extruded polystyrene foam,
28、with or without facings or coatings, which are used for thermal insulation of buildings. The products are manufactured in the form of boards, which are also available with special edge and surface treatment (tongue and grooves, shiplap, etc.). This European Standard specifies product characteristics
29、 and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this European Standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This European Stan
30、dard also covers multilayered insulation boards. This European Standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or no
31、n-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2K/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 C are not covered by this European Standard. This European Standard does not cover in situ insulation products and products intended to be use
32、d for the insulation of building equipment and industrial installations or products intended for acoustic insulation. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated re
33、ferences, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulat
34、ing products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1604, Thermal insulating products for bui
35、lding applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products for building applications Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products f
36、or building applications Determination of compressive creep EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 12086:1997, Thermal insulating products for building applications Determination of water vapour transmission properti
37、es EN 12087, Thermal insulating products for building applications Determination of long term water absorption by immersion ? BS EN 13164:2008 EN 13164:2008 (E) 7 EN 12088, Thermal insulating products for building applications Determination of long term water absorption by diffusion EN 12089, Therma
38、l insulating products for building applications Determination of bending behaviour EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12091, Thermal insulating products for building applications Determination of freeze-thaw resistance EN 12667, Therma
39、l performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products Determination of thermal resistance by means
40、of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172:2008, Thermal insulating products Evaluation of conformity EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to
41、fire test EN 13793, Thermal insulating products for building applications - Determination of behaviour under cyclic loading EN 13820, Thermal insulating materials for building applications Determination of organic content EN 13823, Reaction to fire tests for building products Building products exclu
42、ding floorings exposed to the thermal attack by a single burning item EN ISO 1182, Reaction to fire tests for building products Non-combustibility test (ISO 1182:2002) EN ISO 1716, Reaction to fire tests for building products Determination of the heat of combustion (ISO 1716:2002) EN ISO 4590, Rigid
43、 cellular plastics - Determination of the volume percentage of open cells and closed cells (ISO 4590:2002) EN ISO 9229:2007, Thermal insulation Vocabulary (ISO 9229:2007) EN ISO 11925-2, Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 2:Single-f
44、lame source test (ISO 11925-2:2002) ISO 12491, Statistical methods for quality control of building materials and components 3 Terms, definitions, symbols, units, abbreviated terms 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 Terms and
45、definitions as given in EN ISO 9229:2007 3.1.1.1 extruded polystyrene foam rigid cellular plastics insulation material expanded and extruded with or without a skin, from polystyrene or one of its copolymers and which has a closed cell structure ? BS EN 13164:2008 EN 13164:2008 (E) 8 3.1.1.2 board rigid or semi-rigid insulation product of rectangular shape and cross section in which the thickness is uniform and substantially smaller than the other dimensions 3.1.2 Additional definitions 3.1.2.1 level given value which is the upper or lower limit of a requirement; th