《BS EN 60966-3-2009 Radio frequency and coaxial cable assemblies — Part 3 Sectional specification for semi-flexible coaxial cable assemblies.pdf》由会员分享，可在线阅读，更多相关《BS EN 60966-3-2009 Radio frequency and coaxial cable assemblies — Part 3 Sectional specification for semi-flexible coaxial cable assemblies.pdf（22页珍藏版）》请在三一文库上搜索。
1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI British Standards Radio frequency and coaxial cable assemblies Part 3: Sectional specification for semi-flexible coaxial cable assemblies BS EN 60966-3:2009 National foreword This British Standard
2、is the UK implementation of EN 60966-3:2009. It is identical to IEC 60966-3:2008. It supersedes BS EN 60966-3:2003 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguides, radio frequency connectors and acces- sories for c
3、ommunication and signalling. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2009 ISBN 978 0 580 61643 3
4、ICS 33.120.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2009 Amendments issued since publication Amd. No. Date Text affected BRITISH STANDARDBS EN
5、60966-3:2009 EUROPEAN STANDARD EN 60966-3 NORME EUROPENNE EUROPISCHE NORM April 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: avenue Marnix 17, B - 1000 Brusse
6、ls 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60966-3:2009 E ICS 33.120.10 Supersedes EN 60966-3:2003 English version Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxi
7、al cable assemblies (IEC 60966-3:2008) Ensembles de cordons coaxiaux et de cordons pour frquences radiolectriques - Partie 3: Spcification intermdiaire pour cordons coaxiaux semi-flexibles (CEI 60966-3:2008) Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 3: Rahmenspezifikation fr halbflexible
8、 konfektionierte Koaxialkabel (IEC 60966-3:2008) This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
9、alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made
10、by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Est
11、onia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60966-3:2009 EN 60966-3:2009 - 2 - Foreword The text of doc
12、ument 46/264/CDV, future edition 3 of IEC 60966-3, prepared by IEC TC 46, Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60966-3 on 2009-04-01. This European Standard
13、supersedes EN 60966-3:2003. The major change with respect to EN 60966-3:2003 is a better definition of the tests to be performed. This sectional specification is to be read in conjunction with EN 60966-1:1999. It contains the same clauses as that of EN 60966-1 and completes or amends them when requi
14、red. When a clause of EN 60966-1 does not appear in this standard, it applies as it is in EN 60966-1. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. The following dates were fixed: latest date by which the EN has to be
15、 implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-04-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Intern
16、ational Standard IEC 60966-3:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 60966-3:2009 - 3 - EN 60966-3:2009 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced docume
17、nts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications
18、, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-6 -1) Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 20082) IEC 60096-2 -1) Radio-frequency cables - Part 2: Relevant cable specifications - - IEC 60410 -1) Samplin
19、g plans and procedures for inspection by attributes - - IEC 60966-1 1999 Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods EN 60966-1 19992) IEC 61169 Series Radio-frequency connectors EN 61169 Series IEC 61196 Series Coaxial communi
20、cation cables EN 61196 Series IEC QC 001002 Series IEC Quality Assessment System for Electronic Components (IECQ) - Rules of procedure - - ISO 9000 -1) Quality management systems - Fundamentals and vocabulary EN ISO 9000 20052) 1) Undated reference. 2) Valid edition at date of issue. BS EN 60966-3:2
21、009 标准分享网 for Electronic Components (IECQ) - 标准分享网 for Electronic Components (IECQ) - 标准分享网 Rules of procedure 标准分享网 Rules of procedure Quality management systems - 标准分享网 Quality management systems - Fundamentals and vocabulary 标准分享网 Fundamentals and vocabulary - - - - Part 1: Generic specificatio
22、n - General Part 1: Generic specification - General requirements and test methods requirements and test methods EN 60966-1 1999 EN 60966-1 1999 IEC 61169 Series Radio-frequency connectors IEC 61169 Series Radio-frequency connectors IEC 61196 Series Coaxial communication cables IEC 61196 Series
23、Coaxial communication cables IEC QC 001002 Series IEC Quality Assessment System IEC QC 001002 Series IEC Quality Assessment System for Electronic Components (IECQ) - for Electronic Components (IECQ) - Rules of procedure Rules of procedure 2 60966-3 IEC:2008(E) CONTENTS 1 Scope.5 2 Normative refer
24、ences .5 3 Terms and definitions .5 4 Design and manufacturing requirements.6 4.1 Cable design and construction.6 4.2 Connector design and construction6 4.3 Outline and interface dimensions.6 5 Workmanship, marking and packaging7 6 Quality assessment 8 7 Test methods General .8 8 Electrical tests8 9
25、 Mechanical robustness tests.9 10 Environmental tests9 11 Specialized test methods11 12 Test schedules .11 Figure 1 Length definition of cable assemblies.7 Figure 2 Example of a cable assembly.7 Figure 3 Preferred arrangement for the vibration test.10 Figure 4 Example production flow chart for a fle
26、xible cable assembly 14 Table 1 Grouping of tests for specification purposes12 Table 2 Test schedule13 Table 3 Assignment of CQCs .15 BS EN 60966-3:2009 标准分享网 Figure 4 Example production flow chart for a flexible cable assembly 标准分享网 Figure 4 Example production flow chart for a flexible cable assemb
27、ly 标准分享网 Table 1 Grouping of tests 标准分享网 Table 1 Grouping of tests for specificat 标准分享网 for specificat Table 2 Test schedule 标准分享网 Table 2 Test schedule Table 3 Assignment of CQCs . 标准分享网 Table 3 Assignment of CQCs . Mechanical robustness tests. Mechanical robustness tests. Environmental tests En
28、vironmental tests Specialized test methods Specialized test methods Test schedules . Test schedules . Figure 1 Length definition of cable assemblies. Figure 1 Length definition of cable assemblies. Figure 2 Example of a cable assembly. Figure 2 Example of a cable assembly. Figure 3 Preferred arr
29、angement for the vibration test. Figure 3 Preferred arrangement for the vibration test. Figure 4 Example production flow chart for a flexible cable assembly Figure 4 Example production flow chart for a flexible cable assembly 60966-3 IEC:2008(E) 5 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES Part
30、3: Sectional specification for semi-flexible coaxial cable assemblies 1 Scope This part of IEC 60966 is a sectional specification that relates to semi-flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It establishes uniform requirements for testing the electri
31、cal, mechanical and climatic properties of flexible cable assemblies composed of flexible coaxial cables and coaxial connectors. NOTE 1 For the purposes of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not
32、 to individual and non-assembled parts thereof. NOTE 2 This sectional specification should be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests. 2 Normative references The following ref
33、erenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-6, Environmental testing Part 2-6: Tests Test Fc: Vibr
34、ation (sinusoidal) IEC 60096-2, Radio-frequency cables Part 2: Relevant cable specifications IEC 60410, Sampling plans and procedures for inspection by attributes IEC 60966-1:1999, Radio frequency and coaxial cable assemblies Part 1: Generic specification General requirements and test methods IEC 61
35、169 (all parts), Radio-frequency connectors IEC 61196 (all parts), Coaxial communication cables IEC QC 001002 (all parts), IEC Quality Assessment System for Electronic Components (IECQ) Rules of procedure ISO 9000, Quality management systems Fundamentals and vocabulary 3 Terms and definitions For th
36、e purposes of this document, the terms and definitions given in IEC 60966-1 apply. BS EN 60966-3:2009 标准分享网 Radio-frequency cables Part 2: Relevant cable specifications 标准分享网 Radio-frequency cables Part 2: Relevant cable specifications Sampling plans and procedures for inspection by attributes 标准分享网
37、 Sampling plans and procedures for inspection by attributes IEC 60966-1:1999, 标准分享网 IEC 60966-1:1999, Radio frequency and coaxial cable assemblies Part 1: Generic 标准分享网 Radio frequency and coaxial cable assemblies Part 1: Generic 标准分享网 specification General requirements and test methods 标准分享网 specif
38、ication General requirements and test methods IEC 61169 (all parts), 标准分享网 IEC 61169 (all parts), The following referenced documents are indispensable for the application of this document. The following referenced documents are indispensable for the application of this document. For dated referenc
39、es, only the edition cited applies. For undated references, the latest edition For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. of the referenced document (including any amendments) appli
40、es. Environmental testing Part 2-6: Tests Environmental testing Part 2-6: Tests Radio-frequency cables Part 2: Relevant cable specifications Radio-frequency cables Part 2: Relevant cable specifications 6 60966-3 IEC:2008(E) 4 Design and manufacturing requirements Clause 4 of IEC 60966-1 is applica
41、ble except as follows. Replacement: 4.1 Cable design and construction Cables should conform to IEC 60096-2 or IEC 61196. Where cable designs deviating from these publications are required, they shall comply with the requirements of the detail specification. If required, the manufacturer may use addi
42、tional protective tubing or cable deviating from IEC 61196 in order to comply with the requirements of the detail specification. The materials used in the cable shall be given as engineering information in the detail specification. 4.2 Connector design and construction Connectors should conform to I
43、EC 61169. Where connector designs deviating from IEC 61169 are required, the interface should conform to the relevant part of IEC 61169 where available and shall comply with the requirements of the detail specification. The materials used in the connector shall be given as engineering information in
44、 the detail specification. 4.3 Outline and interface dimensions The outline and interface dimensions shall be in accordance with the detail specification of the cable assembly. The length, unless otherwise specified in the detail specification, is defined as between the reference planes of the conne
45、ctors. In case of right angle connectors, the length applies to the axis of the connectors (see Figure 1). If not indicated in the detail specification, the length tolerance shall be 1 % for cables equal to, or longer than, 300 mm and 3 mm for cables shorter than 300 mm. BS EN 60966-3:2009 标准分享网 The
46、 outline and interface dimensions shall be in accordance with the detail specification of 标准分享网 The outline and interface dimensions shall be in accordance with the detail specification of the cable assembly. 标准分享网 the cable assembly. The length, unless otherwise specified in the detail specificatio
47、n, is defined as between the 标准分享网 The length, unless otherwise specified in the detail specification, is defined as between the 标准分享网 reference planes of the connectors. In case of right angle connectors, the length applies to 标准分享网 reference planes of the connectors. In case of right angle connect
48、ors, the length applies to the axis of the connectors (see Figure 1). 标准分享网 the axis of the connectors (see Figure 1). Connectors should conform to IEC 61169. Where connector designs deviating from IEC 61169 Connectors should conform to IEC 61169. Where connector designs deviating from IEC 61169 are required, the interface