《BS EN 61557-5-2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 5.pdf》由会员分享，可在线阅读，更多相关《BS EN 61557-5-2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 5.pdf（12页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 61557-5:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Part 5: Resistance to earth The European Standard EN 61557-5:2007 has the status of a British Standard I
2、CS 17.220.20; 29.080.01; 29.240.01 ? Licensed Copy: Wang Bin, na, Fri Sep 14 00:51:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BS EN 61557-5:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 June 2007 BSI 2007 ISBN 978 0 580 50858 5 N
3、ational foreword This British Standard was published by BSI. It is the UK implementation of EN 61557-5:2007. It is identical with IEC 61557-5:2007. It supersedes BS EN 61557-5:1997, which will be withdrawn on 1 March 2010. The UK participation in its preparation was entrusted to Technical Committee
4、PEL/85, Measuring equipment for electrical and electromagnetic quantities. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct
5、 application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments issued since publication Amd. No. DateComments Licensed Copy: Wang Bin, na, Fri Sep 14 00:51:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD EN 61557-5 NORME EUROPENNE EUROPISCH
6、E NORM March 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by a
7、ny means reserved worldwide for CENELEC members. Ref. No. EN 61557-5:2007 E ICS 17.220.20; 29.080.01; 29.240.01 Supersedes EN 61557-5:1997 English version Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of pro
8、tective measures - Part 5: Resistance to earth (IEC 61557-5:2007) Scurit lectrique dans les rseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c. - Dispositifs de contrle, de mesure ou de surveillance de mesures de protection - Partie 5: Rsistance la terre (CEI 61557-5:2007) Elektrisc
9、he Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V - Gerte zum Prfen, Messen oder berwachen von Schutzmanahmen - Teil 5: Erdungwiderstand (IEC 61557-5:2007) This European Standard was approved by CENELEC on 2007-03-01. CENELEC members are bound to comply with the CEN/CENELEC Intern
10、al Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC mem
11、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELE
12、C members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
13、Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, na, Fri Sep 14 00:51:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 61557-5:2007 2 Foreword The text of document 85/294/FDIS, future edition 2 of IEC 61557-5, prepared by IEC TC 85, Measuring equipment for electr
14、ical and electromagnetic quantities, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61557-5 on 2007-03-01. This European Standard supersedes EN 61557-5:1997. The following changes were made with respect to EN 61557-5:1997: complete revision of the definitions; revis
15、ion of some requirements. This standard is to be used in conjunction with EN 61557-1. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-12-01 latest date by which the natio
16、nal standards conflicting with the EN have to be withdrawn (dow) 2010-03-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61557-5:2007 was approved by CENELEC as a European Standard without any modification. _ Licensed Copy: Wang Bin, na, Fri Sep
17、 14 00:51:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 3 EN 61557-5:2007 CONTENTS 1 Scope 4 2 Normative references .4 3 Terms and definitions .4 4 Requirements.5 5 Marking and operating instructions .6 5.1 Marking.6 5.2 Operating instructions .7 6 Tests7 Annex ZA (normative) Normative references to
18、 international publications with their corresponding European publications.8 Table 1 Calculation of operating uncertainty.5 Licensed Copy: Wang Bin, na, Fri Sep 14 00:51:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 61557-5:2007 4 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1 000
19、V a.c. AND 1 500 V d.c. EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES Part 5: Resistance to earth 1 Scope This part of IEC 61557 specifies the requirements for equipment for measuring earth resistance using an a.c. voltage. 2 Normative references The following referenced docu
20、ments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61010-1:2001, Safety requirements for electrical equipment for measurement
21、, control, and laboratory use Part 1: General requirements IEC 61557-1, Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Part 1: General requirements 3 Terms and definitions For the purpose
22、s of this document, the definitions given in IEC 61557-1 and the following definitions apply. 3.1 series interference voltage extraneous voltage superimposed on the measuring voltage 3.2 auxiliary earth electrode additional earth electrode for a current required for the purpose of measurements 3.3 a
23、uxiliary earth electrode resistance RH resistance of an additional earth electrode through which current flows that is required for the purpose of measurements 3.4 probe additional earth electrode used as a probe for sampling potentials during measurements Licensed Copy: Wang Bin, na, Fri Sep 14 00:
24、51:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI 标准分享网 www. b z f x w. c o m 5 EN 61557-5:2007 3.5 probe resistance RS earth electrode resistance of an additional earth electrode used as a probe for sampling potentials during measurements 4 Requirements The following requirements as well as those gi
25、ven in IEC 61557-1 shall apply. 4.1 The output voltage present across the terminals E and H shall be an a.c. voltage without a d.c. component. The frequency and the waveform shall be chosen so that electrical interference, particularly from installations operating with system frequency, will not adv
26、ersely influence the measurement result to an excessive degree. 4.2 If the influence of interference voltages from distribution systems as a.c. currents or as d.c. currents exceeds the requirements of 4.3, this shall be stated by the manufacturer in the operating instructions. 4.3 The maximum percen
27、tage operating uncertainty within the measurement range to be marked or stated shall not exceed 30 % with the measured value as fiducial value, as determined in accordance with Table 1. Table 1 Calculation of operating uncertainty Intrinsic uncertainty or influence quantity Reference conditions or s
28、pecified operating range Designation code Requirements or test in accordance with the relevant parts of IEC 61557 Type of test Intrinsic uncertainty Reference conditions A Part 5, subclause 6.1 R Position Reference position 90 E1 Part 1, subclause 4.2 R Supply voltage At the limits stated by the man
29、ufacturer E2 Part 1, subclauses 4.2, 4.3 R Temperature 0 C and 35 C E3 Part 1, subclause 4.2 T Series interference voltage See 4.2 and 4.3 E4 Part 5, subclauses 4.2, 4.3 T Resistance of the probes and auxiliary earth eletrodes 0 to 100 RA but 50 k E5 Part 5, subclause 4.3 T System frequency 99 % and
30、 101 % of the nominal frequency E7 Part 5, subclause 4.3 T System voltage 85 % and 110 % of the nominal voltage E8 Part 5, subclause 4.3 T Operating uncertainty )1,15( 2 8 2 7 2 5 2 4 2 3 2 2 2 1 EEEEEEEAB+= Part 5, subclause 4.3 R A = intrinsic uncertainty En = variations R = routine test T = type
31、test B % = B fiducial value 100 % Licensed Copy: Wang Bin, na, Fri Sep 14 00:51:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 61557-5:2007 6 The operating uncertainty shall apply under the rated operating conditions given in IEC 61557-1 and the following: injection of series interference voltages
32、 with system frequencies of 400 Hz, 60 Hz, 50 Hz, 162/3 Hz or with d.c. voltage respectively across the terminals E (ES) and S or to the earth resistance loop. The r.m.s. value of the series interference voltage for equipment with auxiliary probes shall be 3 V. For equipment using current clamps, th
33、e presence of interfering disturbances shall be clearly indicated, if the influence quantity will exceed the specified value of the variation E4 and of operating uncertainty; resistance of the auxiliary earth electrode and of the probes: 0 to 100 RA but 50 k; system voltages between 85 % and 110 % o
34、f the nominal voltage and between 99 % and 101 % of the nominal system frequency for measuring equipment with a mains supply and/or measuring equipment deriving its output voltage directly from the distribution system. 4.4 The measuring equipment shall be capable of determining whether the maximum p
35、ermissible resistances of the probes and auxiliary earth electrodes are exceeded. 4.5 No hazardous touch voltages shall appear during the measurements. This can be achieved by a suitable design of the source for the output voltage by: limiting the open-circuit value of the output voltage to an r.m.s
36、. value of 50 V or a peak value of 70 V; NOTE The open-circuit voltage during measurements in agricultural plants should not exceed an r.m.s. value of 25 V or a peak value of 35 V. limiting the r.m.s. (peak) value of the short-circuit current to 3,5 mA (5 mA) when the value of the voltage exceeds 50
37、 V (70 V) or 25 V (35 V). When no compliance with the above condition exists, then an automatic disconnection of the measurement process shall operate within a time period permissible according to Figure 1 of IEC 61010-1. 4.6 The user shall not be exposed to a voltage exceeding the permissible touch
38、 voltage and the measuring equipment shall recover within specification, when any plug or socket of the measuring equipment, intended for connection to the distribution systems power supply is connected to 120 % of its nominal voltage. Protective devices shall not be activated. 5 Marking and operati
39、ng instructions 5.1 Marking In addition to the marking in accordance with IEC 61557-1, the following information shall be provided on the measuring equipment. 5.1.1 Measurement range within which the maximum operating uncertainty applies. 5.1.2 Frequency of the output voltage. 5.1.3 Designation of t
40、he terminals (as far as applicable): E: terminal for the earth electrode; ES: terminal for the probe placed nearest to the earth electrode; S: terminal for a probe; H: terminal for the auxiliary earth electrode. Licensed Copy: Wang Bin, na, Fri Sep 14 00:51:02 GMT+00:00 2007, Uncontrolled Copy, (c)
41、BSI 标准分享网 www. b z f x w. c o m 7 EN 61557-5:2007 5.2 Operating instructions The operating instructions shall state the following in addition to the statements in IEC 61557-1. 5.2.1 The range of applications (e.g. for agricultural plants or others) for the equipment for measuring earth resistance. 5
42、.2.2 If applicable, the influence of series interference voltages that are larger than the values stated under 4.3. 5.2.3 A statement relating to the correct operation of the hand-driven generator (if provided). 5.2.4 The designations of terminals when different from 5.1.3. 6 Tests In addition to IE
43、C 61557-1 the following tests shall be executed. 6.1 The operating uncertainty shall be determined in accordance with Table 1. In this process, the intrinsic uncertainty shall be determined under the following reference conditions: nominal value of the supply voltage; nominal r.p.m. of the hand-driv
44、en generator when used as a supply; nominal frequency of the power supply in the case of mains-operated measuring equipment according to 4.3; reference temperature 23 C 2 C; reference position in accordance with the manufacturers statement; resistances of probes and auxiliary earth electrodes 100 ;
45、interference voltage 0 V. The operating uncertainty thus evaluated shall not exceed the limits specified in 4.3. 6.2 A check as to whether the conditions for the open-circuit voltage, short-circuit current and disconnect delay stated under 4.5 are met in each of the measurement ranges (routine test)
46、. 6.3 A check as to whether exceeding the permissible maximum resistances for probes and auxiliary earth electrodes is indicated (type test). 6.4 The overload protection in accordance with 4.6 shall be tested (type test), when any plug or socket of the measuring equipment, intended for conncetion to
47、 the distribution systems power supply is connected to 120 % of its nominal voltage. Protective devices shall not be activated. 6.5 Compliance with the tests in this clause shall be recorded. Licensed Copy: Wang Bin, na, Fri Sep 14 00:51:02 GMT+00:00 2007, Uncontrolled Copy, (c) BSI EN 61557-5:2007
48、8 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest
49、 edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. PublicationYearTitleEN/HDYear IEC 61010-1 2001 Safety requirements for electrical equipment for measurement, c