《GE-FANUC全套资料(英文)之OPENSYS.pdf》由会员分享，可在线阅读，更多相关《GE-FANUC全套资料(英文)之OPENSYS.pdf（1837页珍藏版）》请在三一文库上搜索。
1、GE Fanuc Automation Computer Numerical Control Products Windows 95 and Windows NT 32-Bit Drivers and Libraries for Open CNC Systems Reference Manual GFK-1365BNovember 1997 GFL-001 Warnings, Cautions, and Notes as Used in this Publication Warning Warning notices are used in this publication to emphas
2、ize that hazardous voltages, currents, temperatures, or other conditions that could cause personal injury exist in this equipment or may be associated with its use. In situations where inattention could cause either personal injury or damage to equipment, a Warning notice is used. Caution Caution no
3、tices are used where equipment might be damaged if care is not taken. Note Notes merely call attention to information that is especially significant to understanding and operating the equipment. This document is based on information available at the time of its publication. While efforts have been m
4、ade to be accurate, the information contained herein does not purport to cover all details or variations in hardware or software, nor to provide for every possible contingency in connection with installation, operation, or maintenance. Features may be described herein which are not present in all ha
5、rdware and software systems. GE Fanuc Automation assumes no obligation of notice to holders of this document with respect to changes subsequently made. GE Fanuc Automation makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the acc
6、uracy, completeness, sufficiency, or usefulness of the information contained herein. No warranties of merchantability or fitness for purpose shall apply. Copyright 1997 GE Fanuc Automation North America, Inc. All Rights Reserved. 1 Introduction _ 8 1. Extended Libraries_ 9 1.1 CNC/PMC Data Window Li
7、brary for Windows 95 _ 9 1.1.1 Outline _9 1.1.2 General Description_10 1.1.3 Library Handle _12 (1) Library Handle Description. _ 12 (2) Library Handle Cautions. _ 13 1.1.4 Return Status of Data Window Function_14 1.1.5 Function List _18 CNC: Multi-Connection of HSSB_ 18 CNC: Functions Related to Co
8、ntrolled Axis/Spindle_ 18 CNC: Functions Related to CNC Program_ 19 CNC: Functions Related to CNC File Data _ 20 CNC: Functions Related to Tool Life Management Data_ 22 CNC: Functions Related to History Data _ 23 CNC: Functions Related to Servo/Spindle _ 23 CNC: Functions Related to Data Server, DNC
9、1, DNC2, OSI-Ethernet_ 24 CNC: Functions Related to PUNCH PRESS_ 25 CNC: Functions Related to LASER _ 26 CNC: Functions Related to Servo Learning Data_ 27 CNC: Functions Related to Others _ 27 CNC: Functions Related to PMC _ 28 1.1.6 Multi-Connection of HSSB_29 Structure of library for multi-connect
10、ion _ 29 (1) Allocate the Library Handle (for Multi-Connection) (Version 1.2 and newer) _ 30 (2) Read the Number of Node (Version 1.2 and newer)_ 31 (3) Read the Node Information (Version 1.2 and newer)_ 32 (4) Set the Default Node Number (Version 1.2 and newer) _ 34 1.1.7 Function Reference Related
11、 to Controlled Axes/Spindle _35 (1) Read Actual Axis Feedrate (F) _ 35 (2) Read Absolute Axis Position_ 37 (3) Read Machine Axis Position_ 39 (4) Read Relative Axis Position _ 41 (5) Read Distance to Go _ 43 (6) Read Skip Position_ 45 (7) Read Servo Delay Value _ 47 (8) Read Acceleration/Deceleratio
12、n Delay Value_ 49 (9) Read All Dynamic Data_ 51 (10) Set Origin / Preset Relative Axis Position_ 56 (11) Preset Work Coordinate_ 58 (12) Read Manual Overlapped Motion Value_ 60 (13) Cancel Manual Overlapped Motion Value _ 63 (14) Read Actual Spindle Speed (S) _ 65 (15) Read Load Information of Seria
13、l Spindle _ 67 (16) Read Maximum RPM Ratio of Serial Spindle _ 69 (17) Read Gear Ratio of Serial Spindle_ 71 (18) Read tool tip coordinates for 3-dimensional handle feed(Version 1.3 and newer)_ 73 (19) Read handle interrupt pulse amount for 3-dimensional handle feed(Version 1.3 and newer)_ 75 2 (20)
14、 Read handle interrupt move amount for 3-dimensional handle feed(Version 1.3 and newer)_ 77 (21) Read the modification of tool length compensation amount in tool axis direction(Version 1.3 and newer)_ 79 (22) Clear handle interrupt pulse amount and move amount for 3-dimensional handle feed(version 1
15、.3 and newer) 81 (23) Read absolute axis position 2 (Version 1.4 and newer) _ 83 (24) Read relative axis position 2 (Version 1.4 and newer) _ 84 1.1.8 Function Reference Related to Program _85 (1) Start Downloading NC Program_ 85 (2) Download NC Program_ 87 (3) Download NC Program (Conditional) _ 90
16、 (4) End of Downloading NC Program _ 92 (5) Start Verification of NC Program _ 94 (6) Verify NC Program _ 96 (7) Verify NC Program (Conditional)_ 99 (8) End of Verification _ 101 (9) Start Downloading DNC Program _ 103 (10) Download DNC Program _ 105 (11) Download DNC Program (Conditional) _ 109 (12
17、) End of Downloading DNC Program_ 111 (13) Start downloading DNC program (2) (Version 1.4 and newer) _ 113 (14) Download DNC program (2) (Version 1.4 and newer)_ 116 (15) End of downloading DNC program (2) (Version 1.4 and newer) _ 119 (16) Read the diagnosis data of downloading DNC program (Version
18、 1.4 and newer)_ 121 (17) Start Uploading NC Program _ 123 (18) Upload NC Program _ 125 (19) Upload NC Program (Conditional)_ 128 (20) End of Uploading NC Program_ 130 (21) Read Buffer Status for Downloading/Verification NC Program_ 131 (22) Search Specified Program _ 133 (23) Delete All Programs _
19、135 (24) Delete Specified Program _ 137 (25) Read Program Directory _ 139 (26) Read Program Directory (2) _ 142 (27) Read Program Information _ 144 (28) Read Program Number under Execution_ 146 (29) Read Sequence Number under Execution_ 148 (30) Search Specified Sequence Number _ 150 (31) Rewind Cur
20、sor of NC Program_ 151 (32) Read Block Counter_ 152 (33) Read Program under Execution_ 153 (34) Write Program for MDI Operation _ 155 (35) Read Execution Pointer for MDI Operation _ 157 (36) Write Execution Pointer for MDI Operation_ 159 (37) Read Processing Time Stamp Data_ 161 (38) Read Directory
21、for Processing Time Stamp Data _ 163 1.1.9 Function Reference Related to NC File Data_165 (1) Read Tool Offset Value_ 165 (2) Write Tool Offset Value _ 168 (3) Read Tool Offset Value (Area Specified) _ 172 (4) Write Tool Offset Value (Area Specified)_ 176 (5) Read Tool Offset Information _ 179 (6) R
22、ead Work Zero Offset Value_ 181 (7) Write Work Zero Offset Value _ 184 (8) Read Work Zero Offset Value (Area Specified) _ 187 (9) Write Work Zero Offset Value (Area Specified)_ 190 (10) Read Work Zero Offset Information (Area Specified) _ 193 (11) Read Parameter _ 195 3 (12) Write Parameter_ 198 (13
23、) Read Parameter (Area Specified) _ 201 (14) Write Parameter (Area Specified)_ 205 (15) Read Parameter Information _ 208 (16) Read Minimum, Maximum, Total Number of Parameter_ 210 (17) Read Setting Data _ 212 (18) Write Setting Data_ 215 (19) Read Setting Data (Area Specified)_ 218 (20) Write Settin
24、g Data (Area Specified) _ 222 (21) Read Setting Data Information _ 225 (22) Read Minimum, Maximum, Total Number of Setting Data_ 227 (23) Read Pitch Error Compensation Data (Area Specified) _ 229 (24) Write Pitch Error Compensation Data (Area Specified)_ 231 (25) Read Pitch Error Compensation Data I
25、nformation_ 233 (26) Read Custom Macro Variable _ 235 (27) Write Custom Macro Variable _ 238 (28) Read Custom Macro Variable (Area Specified) _ 241 (29) Write Custom Macro Variable (Area Specified)_ 244 (30) Read Custom Macro Variable Information_ 247 (31) Get Type of Custom Macro Variable_ 249 (32)
26、 Set Type of Custom Macro Variable_ 250 (33) Read P Code Macro Variable _ 251 (34) Write P Code Macro Variable_ 253 (35) Read P Code Macro Variable (Area Specified)_ 255 (36) Write P Code Macro Variable (Area Specified) _ 258 (37) Read P Code Macro Variable Information _ 261 (38) Get Type of P Code Macro Vari