《SAE J2055-1996 IDENTIFICATION TERMINOLOGY AND COMPONENT NOMENCLATURE KNUCKLE BOOM LOG LOADER.pdf》由会员分享，可在线阅读，更多相关《SAE J2055-1996 IDENTIFICATION TERMINOLOGY AND COMPONENT NOMENCLATURE KNUCKLE BOOM LOG LOADER.pdf（5页珍藏版）》请在三一文库上搜索。
1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. QUESTIONS REGARDING THIS DOCUMENT: (724) 772-8512 FAX: (724) 776-0243 TO PLACE A DOCU
3、MENT ORDER; (724) 776-4970 FAX: (724) 776-0790 SAE WEB ADDRESS http:/www.sae.org Copyright 1996 Society of Automotive Engineers, Inc. All rights reserved.Printed in U.S.A. SURFACE VEHICLE 400 Commonwealth Drive, Warrendale, PA 15096-0001 RECOMMENDED PRACTICE Submitted for recognition as an American
4、National Standard J2055 REAF. JUN96 Issued1991-06 Reaffirmed1996-06 Superseding J2055 JUN91 IDENTIFICATION TERMINOLOGY AND COMPONENT NOMENCLATURE KNUCKLE BOOM LOG LOADER ForewordThis Reaffirmed Document not changed other than to put it into the new SAE Technical Standards Board Format. 1.ScopeThis S
5、AE Recommended Practice includes the types of mounting configurations and the names of major components and parts peculiar to this type of machine. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have b
6、een provided to describe the principles to be used in applying this document. 2.References 2.1Related PublicationThe following publication is provided for information purposes only and is not a required part of this document. 2.1.1SAE PUBLICATIONAvailable from SAE, 400 Commonwealth Drive, Warrendale
7、, PA 15096-0001. SAE J1209 JAN85Identification Terminology of Mobile Forestry Machines 3.Definition 3.1A Knuckle Boom Log LoaderA swing-to-load machine with articulated booms, grapple, and supporting structure designed to grab, lift, swing, and place trees or parts of trees. 4.Identification Termino
8、logy 4.1Six different types of mounting configurations are illustrated. (See Figure 1.) 4.2Five different types of boom configurations are illustrated. (See Figure 2.) 5.Component NomenclatureFigure 2 identifies the major components. SAE J2055 Reaffirmed JUN96 -2- FIGURE 1MOUNTING CONFIGURATIONS SAE
9、 J2055 Reaffirmed JUN96 -3- FIGURE 2BOOM TYPES AND NOMENCLATURE SAE J2055 Reaffirmed JUN96 -4- Component Nomenclature Knuckle Boom Log Loader 1.Stabilizer pad 2.Stabilizer leg 3.Stabilizer cylinder 4.Lower frame 5.Swing bearing 6.Swing actuator 7.Upper frame 8.Head 9.Main boom pivot pin 10. Main boo
10、m cylinder 11. Main boom 12. Stick boom cylinder 13. Stick boom pivot pin 14. Stick boom 15. Grapple pivot pin 16. Grapple pivot 17. Grapple 18. Cab 19. Operator station 20. Cab riser 21. Power unit 22. Counterweight 23. Heel boom 24. Heel boom pivot pin 25. Heel boom cylinder 26. Heel 27. Fixed hee
11、l 28. Jib boom cylinder 29. Jib boom pivot pin 30. Jib boom 31. Telescoping boom cylinder 32. Telescoping boom section PREPARED BY THE SAE MACHINE TECHNICAL COMMITTEE SC4FORESTRY AND LOGGING EQUIPMENT SAE J2055 Reaffirmed JUN96 RationaleThis document was reaffirmed as is for the 5-year review. The o
12、nly changes were to comply with the SAE Technical Standards Board format. Relationship of SAE Standard to ISO StandardNot applicable. ApplicationThis SAE Recommended Practice includes the types of mounting configurations and the names of major components and parts peculiar to this type of machine. I
13、llustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document. Reference Section SAE J1209 JAN85Identification Terminology of Mobile Forestry Machines Developed by the SAE Machine Technical Committee SC4Forestry and Logging Equipment