《07-30162048-DC.pdf》由会员分享,可在线阅读,更多相关《07-30162048-DC.pdf(22页珍藏版)》请在三一文库上搜索。
1、Draft for Public Comment Head Office 389 Chiswick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +44(0)20 8996 7001 Form 36 Version 6.1 DPC: 07/30162048 DC Date: 1 February 2007 Origin: International Latest date for receipt of comments: 31 May 2007 Project no.: 2007/00297 Responsible com
2、mittee: IST/15 Software and systems engineering Interested committees: Title: Draft BS ISO/IEC 29382 Corporate Governance of Information and Communication Supersession information: If this document is published as a standard, the UK implementation of it will supersede NONE and partially supersede NO
3、NE . If you are aware of a current national standard which may be affected, please notify the secretary (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 31 May 2007. This draft is issued to allow comments from
4、interested parties; all comments will be given consideration prior to publication. No acknowledgement will normally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and
5、Patent Act 1988 or for circulation within a nominating organization for briefing purposes. Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001
6、 or email ordersbsi-. British, International and foreign standards are also available from BSI Customer Services. British Standards on CD or Online are available from British Standards Publishing Sales Limited. Tel: 01344 404409 or email bsonlinetechindex.co.uk. Information on the co-operating organ
7、izations represented on the committees referenced above may be obtained from the responsible committee secretary. Cross-references The British Standards which implement International or European publications referred to in this draft may be found via the British Standards Online Service on the BSI w
8、eb site http:/www.bsi-. Direct tel: 020 8996 7424 Responsible Committee Secretary: Mr P Restell (BSI) E-mail: peter.restellbsi- a Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Introduction This draft standard
9、 is based on international discussions in which the UK has taken an active part. Your comments on this draft are welcome and will assist in the preparation of the consequent standard. If no comments are received to the contrary, then the UK will approve this draft. There is a high probability that t
10、his text could be adopted by CENELEC as a reference document for harmonization or as a European Standard. Recipients of this draft are requested to comment on the text bearing in mind this possibility. UK Vote Please indicate whether you consider the UK should submit a negative (with reasons) or pos
11、itive vote on this draft. BSI Committee Responsibilities Whether or not the standard is published in its original (international) form, or as a formal British Standard Implementation, the BSI committees responsibilities are to: - aid enquirers to understand the text; - present to the responsible int
12、ernational committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; - monitor related International and European developments and promulgate them in the UK. Submission The guidance given below is intended to ensure that all comments receive efficient and ap
13、propriate attention by the responsible BSI committee. Annotated drafts are not acceptable and will be rejected. All comments must be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover. Comments should be compatible with Version 6.0 or
14、 Version 97 of Microsoft Word for Windows, if possible; otherwise comments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to these format requirements. All comments submitted should be presented as given in the example below. Further information on
15、 submitting comments and how to obtain a blank electronic version of a comment form are available from the BSI web site at:http:/www.bsi- Template for comments and secretariat observationsDate: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7) MB Clause No./ Subclause No./ Annex (e.g. 3.1) Para
16、graph/ Figure/Table/ Note (e.g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed change by the MB Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. Amend to read . so that the mains connector to which
17、no connection . 6.4 Paragraph 2 te The use of the UV photometer as an alternative cannot be supported as serious problems have been encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation
18、. b Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI In accordance with the provisions of Council Resolution 21/1986 this DIS is circulated in the English language only. Conformment aux dispositions de la Rsolut
19、ion du Conseil 21/1986, ce DIS est distribu en version anglaise seulement. THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH. IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTA
20、BLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS. International Organization for Standardization, 2007 Intern
21、ational Electrotechnical Commission, 2007 DRAFT INTERNATIONAL STANDARD ISO/IEC 29382 Attributed to ISO/IEC JTC 1 by the Central Secretariat (see page iii) Voting begins on Voting terminates on 2007-02-01 2007-07-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALI
22、SATION INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION LECTROTECHNIQUE INTERNATIONALE Corporate Governance of Information and Communication Technology Gouvernance dentreprise des technologies de linformation et de la communication ICS 03.100.99; 35.020 FAST-TRACK PROCEDURE Licensed Copy: London
23、 South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ISO/IEC DIS 29382 PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited u
24、nless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a tradem
25、ark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies.
26、 In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Copyright notice This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted under the applicable laws of the users country,
27、 neither this ISO draft nor any extract from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission being secured. Requests for permission to reproduce should be addressed to ei
28、ther ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Reproduction may be subject to royalty payments or a licensing agreement. Vio
29、lators may be prosecuted. ii ISO/IEC 2007 All rights reserved Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI ISO/IEC DIS 29382 ISO/IEC 2007 All rights reserved iii NOTE FROM ITTF This draft International Stand
30、ard is submitted for JTC 1 national body vote under the Fast-Track Procedure. In accordance with Resolution 30 of the JTC 1 Berlin Plenary 1993, the proposer of this document recommends assignment of ISO/IEC 29382 to JTC 1/SC 7. “FAST-TRACK” PROCEDURE 1 Any P-member and any Category A liaison organi
31、zation of ISO/IEC JTC 1 may propose that an existing standard from any source be submitted directly for vote as a DIS. The criteria for proposing an existing standard for the fast-track procedure are a matter for each proposer to decide. 2 The proposal shall be received by the ITTF which will take t
32、he following actions. 2.1 To settle the copyright and/or trade mark situation with the proposer, so that the proposed text can be freely copied and distributed within JTC 1 without restriction. 2.2 To assess in consultation with the JTC 1 secretariat which SC is competent for the subject covered by
33、the proposed standard and to ascertain that there is no evident contradiction with other International Standards. 2.3 To distribute the text of the proposed standard as a DIS. In case of particularly bulky documents the ITTF may demand the necessary number of copies from the proposer. 3 The period f
34、or combined DIS voting shall be six months. In order to be accepted the DIS must be supported by 75 % of the votes cast (abstention is not counted as a vote) and by two-thirds of the P-members voting of JTC 1. 4 At the end of the voting period, the comments received, whether editorial only or techni
35、cal, will be dealt with by a working group appointed by the secretariat of the relevant SC. 5 If, after the deliberations of this WG, the requirements of 3 above are met, the amended text shall be sent to the ITTF by the secretariat of the relevant SC for publication as an International Standard. If
36、 it is impossible to agree to a text meeting the above requirements, the proposal has failed and the procedure is terminated. In either case the WG shall prepare a full report which will be circulated by the ITTF. 6 If the proposed standard is accepted and published, its maintenance will be handled
37、by JTC 1. Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI Licensed Copy:
38、 London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: L
39、ondon South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: Lon
40、don South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: Londo
41、n South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London
42、South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London So
43、uth Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London Sout
44、h Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI DRAFT 2007 Licensed Copy: London South Bank University, London South Bank University, Thu Mar 01 06:26:58 GMT+00:00 2007, Uncontrolled Copy, (c) BSI