《08-30173546-DC.pdf》由会员分享，可在线阅读，更多相关《08-30173546-DC.pdf（12页珍藏版）》请在三一文库上搜索。
1、a Date: 15 January 2008 Origin: International Latest date for receipt of comments: 30 April 2008 Project no.: 2007/02951 Responsible committee: CH/106/4 Dental Instruments and Equipment Interested committees: Title: Draft BS ISO 4073 Dentistry - Information system on the location of dental equipment
2、 in th e working area of the oral health care provider Supersession information: If this document is published as a standard, the UK implementation of it will supersede NONE and partially supersede. NONE If you are aware of a current national standard which may be affected, please notify the secreta
3、ry (contact details below). WARNING: THIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD. THIS DRAFT IS NOT CURRENT BEYOND 30 April 2008. This draft is issued to allow comments from interested parties; all comments will be given consideration prior to publication. No acknowledgeme
4、nt will normally be sent. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for circulation within a nominating organization for briefing purposes. Electron
5、ic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, Tel: +44(0) 20 8996 9001 or email ordersbsi-. British, International and foreign standards are also available from BSI Cust
6、omer Services. Information on the co-operating organizations represented on the committees referenced above may be obtained from the responsible committee secretary. Cross-references The British Standards which implement International or European publications referred to in this draft may be found v
7、ia the British Standards Online Service on the BSI web site http:/www.bsi-. Direct tel: +44 (0)208 996 7462 Responsible Committee Secretary: Simon Merriman (BSI) E-mail: simon.merrimanbsi- Draft for Public Comment Head Office 389 Chiswick High Road London W4 4AL Telephone: +44(0)20 8996 9000 Fax: +4
8、4(0)20 8996 7001 Form 36 Version 7.0 DPC: 08/30173546 DC Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 05:44:31 GMT+00:00 2008, Uncontrolled Copy, (c) BSI b Introduction This draft standard is based on international discussions in which the UK has taken an act
9、ive part. Your comments on this draft are invited and will assist in the preparation of the consequent standard. Comments submitted will be reviewed by the relevant BSI committee before sending the consensus UK vote and comments to the international secretariat, which will then decide appropriate ac
10、tion on the draft and the comments received. If no comments are received to the contrary, then the UK will approve this draft. If the international standard is approved, it is possible the text will be published as an identical British Standard. UK Vote Please indicate whether you consider the UK sh
11、ould submit a negative (with reasons) or positive vote on this draft. Submission The guidance given below is intended to ensure that all comments receive efficient and appropriate attention by the responsible BSI committee. Annotated drafts are not acceptable and will be rejected. All comments must
12、be submitted, preferably electronically, to the Responsible Committee Secretary at the address given on the front cover. Comments should be compatible with Version 6.0 or Version 97 of Microsoft Word for Windows, if possible; otherwise comments in ASCII text format are acceptable. Any comments not s
13、ubmitted electronically should still adhere to these format requirements. All comments submitted should be presented as given in the example below. Further information on submitting comments and how to obtain a blank electronic version of a comment form are available from the BSI web site at: http:/
14、www.bsi- Template for comments and secretariat observations Date: xx/xx/200x Document: ISO/DIS xxxxx 1 2 (3) 4 5 (6) (7) MB Clause No./ Subclause No./ Annex (e.g. 3.1) Paragraph/ Figure/Table/ Note (e.g. Table 1) Type of com- ment Comment (justification for change) by the MB Proposed change by the M
15、B Secretariat observations on each comment submitted 3.1 Definition 1 ed Definition is ambiguous and needs clarifying. Amend to read . so that the mains connector to which no connection . 6.4 Paragraph 2 te The use of the UV photometer as an alternative cannot be supported as serious problems have b
16、een encountered in its use in the UK. Delete reference to UV photometer. Microsoft and MS-DOS are registered trademarks, and Windows is a trademark of Microsoft Corporation. Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 05:44:31 GMT+00:00 2008, Uncontrolled Co
17、py, (c) BSI THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH. IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES
18、, DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS. RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH T
19、HEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION. DRAFT INTERNATIONAL STANDARD ISO/DIS 4073 International Organization for Standardization, 2008 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION ISO/TC 106/SC 6 Voting begins on: 2008-01-10 Secretariat:
20、DIN Voting terminates on: 2008-06-10 Dentistry Information system on the location of dental equipment in the working area of the oral health care provider Art dentaire Systme dinformations relatives lemplacement de lquipement dentaire dans la zone de travail du fournisseur de soins dentaires Revisio
21、n of first edition (ISO 4073:1980) ICS 11.060.20 In accordance with the provisions of Council Resolution 15/1993 this document is circulated in the English language only. Conformment aux dispositions de la Rsolution du Conseil 15/1993, ce document est distribu en version anglaise seulement. To exped
22、ite distribution, this document is circulated as received from the committee secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at publication stage. Pour acclrer la distribution, le prsent document est distribu tel quil est parvenu du secrtariat du comit. L
23、e travail de rdaction et de composition de texte sera effectu au Secrtariat central de lISO au stade de publication. Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 05:44:31 GMT+00:00 2008, Uncontrolled Copy, (c) BSI ISO/DIS 4073 ii ISO 2008 All rights reserved
24、PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
25、parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relat
26、ive to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. Copyri
27、ght notice This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted under the applicable laws of the users country, neither this ISO draft nor any extract from it may be reproduced, stored in a retrieval system or transmitted in any form or by any me
28、ans, electronic, photocopying, recording or otherwise, without prior written permission being secured. Requests for permission to reproduce should be addressed to either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva
29、20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Reproduction may be subject to royalty payments or a licensing agreement. Violators may be prosecuted. Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 05:44:31 GMT+00:00 2008
30、, Uncontrolled Copy, (c) BSI ISO/DIS 4073 ISO 2008 All rights reserved iii Contents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Terms and definitions.1 4 Information system on the location of items of dental equipment 3 Bibliography4 Licensed Copy: London South Bank University
31、, London South Bank University, Fri Feb 15 05:44:31 GMT+00:00 2008, Uncontrolled Copy, (c) BSI ISO/DIS 4073 iv ISO 2008 All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of prepar
32、ing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in li
33、aison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of
34、 technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is
35、 drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 4073 was prepared by Technical Committee ISO/TC 106, Dentistry, Subcommittee SC 6, Dental equipment. This sec
36、ond edition cancels and replaces the first edition, which has been technically revised. Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 05:44:31 GMT+00:00 2008, Uncontrolled Copy, (c) BSI ISO/DIS 4073 ISO 2008 All rights reserved v Introduction The specification
37、 of an information system on the location of dental equipment in the working area of the oral health care provider is of basic importance for an international understanding and communication of the allocation of the dental equipment. Licensed Copy: London South Bank University, London South Bank Uni
38、versity, Fri Feb 15 05:44:31 GMT+00:00 2008, Uncontrolled Copy, (c) BSI Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 05:44:31 GMT+00:00 2008, Uncontrolled Copy, (c) BSI DRAFT INTERNATIONAL STANDARD ISO/DIS 4073 ISO 2008 All rights reserved 1 1 Scope This Inte
39、rnational Standard specifies an information system on the location of items of dental equipment which are used at the working place of the team of the oral health care provider where examination, treatment and other clinical procedures, with the patient directly involved, are carried out. The identi
40、fication system provides the means to give general information about the presence of items and to describe relevant characteristics concerning dimensional flexibility and adaptability of the items and parts of their accessories. 2 Normative references The following referenced documents are indispens
41、able for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1942, Dentistry Vocabulary ISO 9687, Dental equipment Graphical symbols 3 Terms and definitio
42、ns For the purposes of this document, the terms and definitions given in ISO 1942 and the following apply. 3.1 dental office dental surgery facility where patients are received and treated by the dental personnel ISO/DIS 1942:2005, 3.78 3.2 oral health care provider dental operator person who is per
43、forming a treatment procedure on a patient (e.g. dentist, hygienist) NOTE This definition applies only to the role being performed at a particular time. 3.3 chairside assistant person supporting the dental operator in the working area Dentistry Information system on the location of dental equipment
44、in the working area of the oral health care provider Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 05:44:31 GMT+00:00 2008, Uncontrolled Copy, (c) BSI ISO/DIS 4073 2 ISO 2008 All rights reserved 3.4 working area of the oral healthcare provider treatment area o
45、f the oral health care provider working space of the oral health care provider area organized around the oral health care provider and equipped for positioning and treatment of the patient ISO/DIS 1942:2005, 3.346 3.5 dental equipment furniture, machines, apparatus and accessories thereto, specially
46、 made for use in the practice of dentistry and/or its associated procedures Modified version from ISO/DIS 1942:2005, 3.70 3.6 dental unit item consisting of an assembly of interconnected sub-units of dental equipment and instruments providing a functional unit for dental use ISO 1942 3.7 patient cha
47、ir (1) item which is designed to support and position the patient for treatment and therefore provided with a range of movements ISO 1942-4:1989, 4.022 (2) permanently fixed or free-standing chair, adjustable in height with respects to the relation between the different parts 3.8 operators stool mov
48、able seat, adjustable in height that supports the body of the oral health care provider or of the chairside assistant in a seated position 3.9 operating light item of dental equipment specially designed for use by an operator for illuminating the oral cavity, consisting of a luminaire and one or mor
49、e lamps 3.10 suction system low and high volume aspirating units and the corresponding hoses that are connected to a remote suction machine to enable an air flow designated to remove spray, liquids and solids from the mouth of the dental patient during treatment 3.11 powered polymerization activator device for producing light in the blue wavelength region, intended for ch