《ABS-12-NOTICE-6-2008.pdf》由会员分享，可在线阅读，更多相关《ABS-12-NOTICE-6-2008.pdf（2页珍藏版）》请在三一文库上搜索。
1、 ABS RULES FOR BUILDING AND CLASSING REINFORCED PLASTIC VESSELS . 1978 1 RULES FOR BUILDING AND CLASSING REINFORCED PLASTIC VESSELS 1978 NOTICE NO. 6 January 2008 (Rev. on 31 March 2008) The following Rule Changes become EFFECTIVE AS OF 1 JANUARY 2008. Notes - The date in the parentheses means the d
2、ate that the Rule becomes effective for new construction based on the contract date for construction, unless otherwise noted. (See 1-1-4/3.3 of the ABS Rules for Conditions of Classification (Part 1).) Note Regarding the Changes to Section 1 For the 2008 edition, Section 1, “Conditions of Classifica
3、tion” was consolidated into a generic booklet, entitled Rules for Conditions of Classification (Part 1) for all vessels other than those in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in “Section 1” to ABS-classed v
4、essels, other marine structures and their associated machinery, and thereby make “Conditions of Classification” more readily a common Rule of the various ABS Rules and Guides, as appropriate. As a result of this consolidation, those portions of Section 1 which are now included in the generic booklet
5、 are deleted or revised as follows. (Add new Foreword to Section 1, as follows.) Foreword (1 January 2008) For the 2008 edition, Section 1, “Conditions of Classification” was consolidated into a generic booklet, entitled Rules for Conditions of Classification (Part 1) for all vessels other than thos
6、e in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in “Section 1” to ABS-classed vessels, other marine structures and their associated machinery, and thereby make “Conditions of Classification” more readily a common R
7、ule of the various ABS Rules and Guides, as appropriate. Thus, Section 1 of these Rules specifies only the unique requirements applicable to reinforced plastic vessels. These supplemental requirements are always to be used with the aforementioned Rules for Conditions of Classification (Part 1). Copy
8、right American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:11:51 MDTNo reproduction or networking permitted without license from IHS -,-,- Notice No. 6 January 2008 2 ABS RULES FOR BUILDING AND CLASSING REINFORCED PLASTIC VESS
9、ELS . 1978 SECTION 1 CONDITIONS OF CLASSIFICATION (Add the following new Subsection 1.1.) 1.1 Classification (1 January 2008) The requirements for conditions of classification are contained in the separate, generic ABS Rules for Conditions of Classification (Part 1). Additional requirements specific
10、 to reinforced plastic vessels are contained in the following portions of this Section. 1.2 Application (Renumber existing Subsection 1.1 as Subsection 1.2.) (Delete entire existing Subsections 1.2 through 1.5.) 1.3 Classification Symbols (1 January 2008) (Renumber Subsection 1.6 as 1.3. Delete enti
11、re existing text of Subsection 1.3 and replace with the following:) A listing of Classification Symbols and Notations available to the Owners of vessels, offshore drilling and production units and other marine structures and systems, “List of ABS Notations and Symbols” is available from the ABS webs
12、ite “http:/www.eagle.org/absdownloads/index.cfm”. 1.4 Submission of Plans (Renumber Subsection 1.7 as 1.4.) 1.5 Process Description (Renumber Subsection 1.8 as 1.5.) (Delete entire existing Subsection 1.9.) 1.6 Trials (Renumber Subsection 1.10 as 1.6.) (Delete entire existing Subsections 1.11 through 1.16.) Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:11:51 MDTNo reproduction or networking permitted without license from IHS -,-,-