《ABS-82-2007-E2008.pdf》由会员分享,可在线阅读,更多相关《ABS-82-2007-E2008.pdf(1075页珍藏版)》请在三一文库上搜索。
1、 GUIDE FOR BUILDING AND CLASSING FLOATING PRODUCTION INSTALLATIONS 2007 Guide to Color Coding Used in Online Version of the Guide The following summarizes the colors corresponding to Rule Changes, Corrigenda items and editorial changes in the Rules files which are available for download. Rule Change
2、s: NOTICE NO. 1 December 2007 (effective 29 November 2007) NOTICE NO. 2 March 2008 (effective 1 January 2008) NOTICE NO. 3 May 2008 (effective 1 July 2008) Corrigenda: CORRIGENDA/EDITORIALS 17 March 2008 CORRIGENDA/EDITORIALS 11 July 2008 Editorials: Editorial Changes Copyright American Bureau of Sh
3、ipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- Guide for Building and Classing Floating Production Installations GUIDE FOR BUILDING AND CLASSING FLOATING PRODUCT
4、ION INSTALLATIONS SEPTEMBER 2007 (Updated March 2008 see next page) American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 Copyright 2007 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA Copyright American Bureau of Shipping Pro
5、vided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- Updates March 2008 consolidation includes: December2007 version plus Notice No. 2, Corrigenda/Editorials December 2007 conso
6、lidation includes: September2007 version plus Notice No. 1 Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- ABS GUIDE FOR BUILDING A
7、ND CLASSING FLOATING PRODUCTION INSTALLATIONS . 2007 iii Foreword Foreword Foreword This Guide specifies the ABS requirements for building and classing Floating Production Installations (FPIs) that should be used by designers, builders, Owners and Operators in the offshore industry. The requirements
8、 contained in this Guide are for design, construction, and survey after construction of the floating installation vessel (including hull structure, equipment and marine machinery), the position mooring system and the hydrocarbon production facilities. Floating installations of the ship-type, column-
9、stabilized-type, tension leg platforms and spar vessels are included, as well as existing tanker hull structures (ordinary conversions). The requirements for optional notations for disconnectable floating installations, dynamic positioning systems and import/export systems are also provided. This Gu
10、ide is to be used in conjunction with other ABS Rules and Guides, as specified herein. The year 2007 edition of the Guide for Building and Classing Floating Production Installations is a consolidation of the August 2006 edition of the FPI Guide with modifications and updates and the modified SafeHul
11、l criteria for FPIs from the Steel Vessel Rules Part 5 (January 2005) for tankers. The 2007 edition consists of the two (2) Parts as shown in Table 1 below. In this regard, we would bring the following to the users attention: a) PART 1 “General Requirements” emphasizes the common applicability of th
12、e requirements to ABS-classed floating production installations. This part is a complete reprint of the August 2006 edition with modifications and updates. b) PART 2 “Ship-type Vessels” reflects the extracted contents of Steel Vessel Rules Part 5 for tankers (January 2005 edition). Note: The subsequ
13、ent editions of the Steel Vessel Rules Part 5 for tankers which are updated based on the calibration results performed for trading tankers are not applicable for ship-type FPIs. The primary changes from the August 2006 edition of the Guide are identified and listed below. Rule Change for Stability a
14、nd Watertight/Weathertight Integrity of Spars (1-4-6/9 and 1-4-6/10). Rule Change for Stability and Watertight/Weathertight Integrity of TLPs (1-4-5/9 and 1-4-5/10). Rule Change of Survival Environmental Conditions for TLPs (1-4-5/5.3). Rule Change of Deck Clearance for TLPs (1-4-5/7.7). Rule Change
15、 of Tendon Loads for TLPs (1-4-5/17.7). Rule Change of Environmental Severity Factors ( and ) for Ship-type FPSOs (2-1-1/1.1). Consolidated draft change from 1/2 design draft to 2/3 design draft for Sloshing Load Cases (Section 2-1-3) for FPSO applications. TABLE 1 Applicable Editions of Booklets Co
16、mprising 2007 Guide Part 1: General Requirements 2007 Part 2: Ship-Type Vessels 2007 Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,
17、- Changes to Conditions of Classification (1 January 2008) For the 2008 edition, Part 1, Chapter 1, “Scope and Conditions of Classification” was consolidated into a generic booklet, entitled Rules for Conditions of Classification Offshore Units and Structures (Part 1) for all units, installations, v
18、essels or systems in offshore service. The purpose of this consolidation was to emphasize the common applicability of the classification requirements in “Part 1, Chapter 1” to ABS-classed offshore units, pipelines, risers, and other offshore structures, and thereby make “Conditions of Classification
19、” more readily a common Rule of the various ABS Rules and Guides, as appropriate. Thus, Part 1, Chapter 1 of this Guide specifies only the unique requirements applicable to floating production installations. These supplemental requirements are always to be used with the aforementioned Rules for Cond
20、itions of Classification Offshore Units and Structures (Part 1). Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- ABS GUIDE FOR BUIL
21、DING AND CLASSING FLOATING PRODUCTION INSTALLATIONS . 2007 v Table of Contents GUIDE FOR BUILDING AND CLASSING FLOATING PRODUCTION INSTALLATIONS CONTENTS PART 1 General Requirements.1 Chapter 1 Scope and Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification Offsh
22、ore Units and Structures)5 See also separately published booklet ABS Rules for Conditions of Classification Offshore Units and Structures (Part 1) Chapter 2 Definitions.21 Chapter 3 Environmental Loading and Design Basis33 Chapter 4 Floating Installations: Ship, Column-Stabilized and Other Types.49
23、Chapter 5 Position Mooring Systems137 Chapter 6 Hydrocarbon Production and Process Systems157 Chapter 7 Import and Export Systems 181 Chapter 8 Installation, Hook-up and Commissioning 195 Chapter 9 Surveys After Installation and Commissioning.215 Appendix 1 The Modification of Ship-Type Floating Pro
24、duction System Criteria for Site-Specific Environment Conditions263 Appendix 2 Abbreviations and References267 Appendix 3 Guidance for the Class Notation, Storage Service273 PART 2 Ship-Type Vessels .279 Chapter 1 Ship-Type Vessels (150 meters (492 feet) or more in Length).281 Chapter 2 Ship-Type Ve
25、ssels Under (150 meters (492 feet) in Length) .519 Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- This Page Intentionally Left Bla
26、nk Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- ABS GUIDE FOR BUILDING AND CLASSING FLOATING PRODUCTION INSTALLATIONS . 2007 1 P
27、 A R T P a r t 1 : G e n e r a l R e q u i r e m e n t s 1 General Requirements CONTENTS CHAPTER 1 Scope and Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification Offshore Units and Structures).5 Section 1 Classification.7 Section 2 System Classification Boundari
28、es, Symbols and Notations.9 Section 3 Rules and the Criteria Presented for Classification.15 Section 4 Submission of Plans, Data and Calculations17 CHAPTER 2 Definitions.21 Section 1 Basic Configurations.23 Section 2 Vessel.25 Section 3 Production Facilities27 Section 4 Position Mooring System29 Sec
29、tion 5 Subsea System.31 CHAPTER 3 Environmental Loading and Design Basis 33 Section 1 General Design Basis.35 Section 2 Design Documentation .37 Section 3 Design Conditions.39 Section 4 Environmental Conditions.43 CHAPTER 4 Floating Installations: Ship, Column-Stabilized and Other Types49 Section 1
30、All Vessels 55 Section 2 Ship-type Vessels.59 Section 3 Column-stabilized Vessels71 Section 4 Existing Tanker Hull Structures (Ordinary Conversions).77 Section 5 Tension Leg Platforms89 Section 6 Spar Vessels.113 Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=B
31、oeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- 2 ABS GUIDE FOR BUILDING AND CLASSING FLOATING PRODUCTION INSTALLATIONS . 2007 CHAPTER 5 Position Mooring Systems137 Section 1 Mooring System139 Section 2 Anchor Holding
32、Power145 Section 3 Field Test 149 Section 4 Single Point Moorings CALMs, SALMs, Turrets and Yokes.151 Section 5 Surveys During Construction155 CHAPTER 6 Hydrocarbon Production and Process Systems 157 Section 1 General .159 Section 2 Scope161 Section 3 Installations.163 Section 4 Subsea Equipment165
33、Section 5 Other Codes and Standards.167 Section 6 Non-Standard Equipment .159 Section 7 Design and Construction 171 Section 8 Process System173 Section 9 Hazardous Area Classification175 Section 10 Fire Protection.177 Section 11 Fabrication and Testing 179 CHAPTER 7 Import and Export Systems181 Sect
34、ion 1 General .183 Section 2 Submission of Plans and Design Data .185 Section 3 Environmental Considerations187 Section 4 System Design and Analysis 189 Section 5 Material .193 CHAPTER 8 Installation, Hook-up and Commissioning195 Section 1 General .197 Section 2 Hook-Up Procedures Submittal201 Secti
35、on 3 Start-Up and Commissioning Procedures Submittal.203 Section 4 Surveys During Installation of the Mooring Systems 205 Section 5 Surveys During Installation of the Import/Export Systems 207 Section 6 Surveys During Hook-Up209 Section 7 Demonstration of the Disconnectable Mooring System211 Section
36、 8 Surveys During Start-Up and Commissioning213 CHAPTER 9 Surveys After Installation and Commissioning215 Section 1 Surveys.219 Section 2 Drydocking Surveys225 Section 3 Annual Surveys Hull.229 Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001
37、 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- ABS GUIDE FOR BUILDING AND CLASSING FLOATING PRODUCTION INSTALLATIONS . 2007 3 Section 4 Intermediate Surveys231 Section 5 Special Periodical Surveys Hull.233 Section 6 Annual Surveys Machi
38、nery235 Section 7 Special Periodical Surveys Machinery 237 Section 8 Special Periodical Surveys Electrical Equipment.239 Section 9 Tail Shaft and Tube Shaft Surveys.241 Section 10 Thruster Surveys.243 Section 11 Boiler Surveys.245 Section 12 Shipboard Automatic and Remote-control Surveys.247 Section
39、 13 Inert Gas System Surveys249 Section 14 Annual Surveys Production Facilities 251 Section 15 Special Periodical Surveys Production Facilities253 Section 16 Annual Surveys Mooring Systems.255 Section 17 Special Periodical Surveys Mooring Systems257 Section 18 Annual Surveys Import and Export System
40、s.259 Section 19 Special Periodical Surveys Import and Export Systems261 APPENDIX 1 The Modification of Ship-Type Floating Production System Criteria for Site-Specific Environment Conditions 263 APPENDIX 2 Abbreviations and References .267 Section 1 Abbreviations269 Section 2 References271 APPENDIX
41、3 Guidance for the Class Notation, Storage Service .273 Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- This Page Intentionally Lef
42、t Blank Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- ABS GUIDE FOR BUILDING AND CLASSING FLOATING PRODUCTION INSTALLATIONS . 200
43、7 5 P A R T Chapter 1: Scope and Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification Offshore Units and Structures) 1 C H A P T E R 1 Scope and Conditions of Classification (Supplement to the ABS Rules for Conditions of Classification Offshore Units and Structu
44、res) CONTENTS SECTION 1 Classification7 SECTION 2 System Classification Boundaries, Symbols and Notations.9 1 Classification Boundaries 9 3 Classification Symbols.9 5 Additional Class Notations.10 5.1 Disconnectable System.10 5.3 Classification of Dynamic Positioning Systems.10 5.5 Classification of
45、 Additional Equipment and Systems.10 5.7 SafeHull-Dynamic Loading Approach (SH-DLA).11 5.9 SafeHull Criteria11 5.10 Fatigue Life .12 5.11 Spectral Fatigue Analysis13 5.13 Additional Corrosion Margin13 7 AMS Notation.13 9 Notations for Automatic or Remote Control and Monitoring Systems .14 9.1 ACC or
46、 ACCU Notations .14 9.3 AMCC or AMCCU Notations14 11 Temporary Mooring Equipment Symbol14 13 Systems not Built Under Survey14 15 Conversion of Existing Vessels .14 SECTION 3 Rules and the Criteria Presented for Classification .15 1 Application .15 3 Reference Standards.15 5 Risk Evaluations for Alte
47、rnative Arrangements and Novel Features.15 Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:02:29 MDTNo reproduction or networking permitted without license from IHS -,-,- 6 ABS GUIDE FOR BUILDING AND CLASSING FLOATING PRODUCTION INSTALLATIONS . 2007 SECTION 4 Submission of Plans, Data and Calculations17 1 Design Plans and Data17 3 Position Mooring System Design Documentation .18 5 Production Facilities and Production Support Facilities.18 7 Machinery Plans 20 9 Addit