《ABS-NOTATIONS-AND-SYMBOLS-2003.pdf》由会员分享，可在线阅读，更多相关《ABS-NOTATIONS-AND-SYMBOLS-2003.pdf（152页珍藏版）》请在三一文库上搜索。
1、 ABSABS Notations and Symbols 3 November 2003 (Updated on 21 July 2004) Overview The following listing of ABS Classification notations is comprised of the following headers: Common Notations and Symbols The notations and symbols contained under this heading may be applicable to any type of vessel or
2、 offshore installation, as indicated by the referenced Rules and Guides (which are mostly available for viewing at http:/www.eagle.org/rules/downloads.html). These notations and symbols pertain to hull structure, analyses, equipment, machinery, automation, surveys, etc. Other Notations for Specific
3、Applications Bulk Carrier, Container Carrier, Offshore Services, etc. Following the common notations, are groupings by type of vessel or offshore service. The notations contained under the heading for each vessel type are applicable only to that type of vessel. The types of vessels are organized sta
4、rting with those that are covered by the Rules for Building and Classing Steel Vessels and associated Guides specific to the vessel type and are followed by those vessels covered by the following Rules and Guides: Rules for Building and Classing Steel Vessels Under 90 meters (295 feet) in Length Gui
5、de for Building and Classing High Speed Craft Guide for Building and Classing High Speed Naval Craft Guide for Building and Classing Motor Pleasure Yachts Rules for Building and Classing Steel Barges Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways Rules
6、 for Building and Classing Underwater Vehicles, Systems and Hyperbaric Facilities Offshore Service notations, as specified within the referenced Offshore Rules and Guides. The example class notations given under “Remarks” on each page are intended only to show the usage of the particular notation on
7、 that page and are not necessarily all-inclusive for the particular application/services shown. Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:26:45 MDTNo reproduction or networking permitted without license fr
8、om IHS -,-,- ABSABS Notations and Symbols 3 November 2003 (Updated on 21 July 2004) Revisions The following Table lists newly-added Class Notations, the category under which they fall in the list and the date they were added: Notation Category Date Added Ice Strengthening Common Notations and Symbol
9、s 13 Feb. 2004 RCM (PROP) Common Notations and Symbols RCM (FIRE) Common Notations and Symbols RCM (CARGO) Common Notations and Symbols RCM (MACH) Common Notations and Symbols RCM (CDS) Common Notations and Symbols (LNG) R Liquefied Gas Carriers RB Steel Vessels 90 m (295 ft) Commercial Yachting Ser
10、vice Yachting Service Offshore Racing Yacht Yachting Service Deck Decompression Chamber Underwater Vehicles and Systems Dive Control Station Underwater Vehicles and Systems Handling System Underwater Vehicles and Systems Remote Operated Vehicle Underwater Vehicles and Systems Offshore Installation O
11、ffshore Services Liftboat Offshore Services Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:26:45 MDTNo reproduction or networking permitted without license from IHS -,-,- ABSABS Notations and Symbols 3 November
12、 2003 (Updated on 21 July 2004) Common Notations and Symbols SYMBOL DESCRIPTION The Maltese Cross, , symbol is assigned to vessels and offshore units for which the hull construction and/or the manufacture of its machinery and components and any associated required testing, as applicable, is carried
13、out under ABS survey. For a vessel or offshore unit constructed under survey of another recognized Classification Society or Authority, the Maltese Cross, , symbol will be omitted from the hull and/or machinery classification notations. REFERENCES 1-1-3/1 and 1-1-3/9 of: Rules for Building and Class
14、ing Steel Vessels Rules for Building and Classing Steel Vessels Under 90 Meters (295 Feet) in Length, Rules for Building and Classing Mobile Offshore Drilling Units 1-1-3/1 and 1-1-3/7 of: Rules for Building and Classing Steel Barges 1/1.3.1 and 1/1.3.4 of: Rules for Building and Classing Steel Vess
15、els for Service on Rivers and Intracoastal Waterways 1.1 of: Rules for Building and Classing Bulk Carriers for Service on the Great Lakes 1/5.5 of: Rules for Building and Classing Underwater Vehicles, Systems and Hyperbaric Facilities 1.1.1 and 1.1.5 of: Rules for Building and Classing Aluminum Vess
16、els 1.6.1 and 1.6.4 of: Rules for Building and Classing Reinforced Plastic Vessels 1.1.1 and 1.1.2 of: Rules for Building and Classing Steel Floating Dry Docks 1/1.3.1 and 1/1.3.2 of: Rules for Building and Classing Single Point Moorings Rules for Building and Classing Offshore Installations 1-1-3/1
17、 and 1-1-3/5 of: Guide for Building and Classing High Speed Naval Craft 1/1.3.1 and 1/1.3.5 of: Guide for Building and Classing High Speed Craft 1.11.1 of: Guide for Building and Classing Motor Pleasure Yachts, etc. REMARKS Classification symbol whose meaning is the same within all ABS Rules and Gui
18、des. Example: Vessels have been built under ABS survey Vessels have not been built under ABS survey Hull and Equipment: A1 A1 A1 Machinery, boiler and systems AMS AMS AMS Shipboard automation systems ACCU ACCU ACCUACCU Copyright American Bureau of Shipping Provided by IHS under license with ABS Lice
19、nsee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:26:45 MDTNo reproduction or networking permitted without license from IHS -,-,- ABSABS Notations and Symbols 3 November 2003 (Updated on 21 July 2004) Common Notations and Symbols SYMBOLS A1 DESCRIPTION A1 is a classification symbol that, toget
20、her with the Maltese Cross symbol, indicates compliance with the Hull requirements of the ABS Rules or their equivalent for unrestricted ocean service and survey by the Bureau during construction of the vessel. The symbols A1 may be followed by appropriate vessel type notation such as Oil Carrier, B
21、ulk Carrier, Fuel Oil Carrier, Ore Carrier, Passenger Vessel, Vehicle Carrier, Container Carrier, Towing Vessel, Refrigerated Cargo Carrier, Liquefied Gas Carrier, etc. The Maltese Cross symbol will be omitted for vessels that have not been built under survey by the Bureau. REFERENCES 1-1-3/1 and 1-
22、1-3/9 of: Rules for Building and Classing Steel Vessels Rules for Building and Classing Steel Vessels Under 90 Meters (295 Feet) in Length, Rules for Building and Classing Mobile Offshore Drilling Units 1-1-3/1 and 1-1-3/7 of: Rules for Building and Classing Steel Barges 1/1.3.1 and 1/1.3.4 of: Rule
23、s for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways 1.1 of: Rules for Building and Classing Bulk Carriers for Service on the Great Lakes 1/5.5 of: Rules for Building and Classing Underwater Vehicles, Systems and Hyperbaric Facilities 1.1.1 and 1.1.5 of: Rules f
24、or Building and Classing Aluminum Vessels 1.6.1 and 1.6.4 of: Rules for Building and Classing Reinforced Plastic Vessels 1.1.1 and 1.1.2 of: Rules for Building and Classing Steel Floating Dry Docks 1/1.3.1 and 1/1.3.2 of: Rules for Building and Classing Single Point Moorings Rules for Building and C
25、lassing Offshore Installations 1-1-3/1 and 1-1-3/5 of: Guide for Building and Classing High Speed Naval Craft 1/1.3.1 and 1/1.3.5 of: Guide for Building and Classing High Speed Craft 1.11.1 of: Guide for Building and Classing Motor Pleasure Yachts, etc. REMARKS Classification symbols whose meaning i
26、s the same within all ABS Rules and Guides as regards to indicating compliance with hull/structural related requirements. Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:26:45 MDTNo reproduction or networking pe
27、rmitted without license from IHS -,-,- ABSABS Notations and Symbols 3 November 2003 (Updated on 21 July 2004) Common Notations and Symbols SYMBOL DESCRIPTION Circle E, , is a classification symbol that signifies that the equipment of anchors and chain cables of the vessel is in compliance with the r
28、equirements of the Rules, or with the requirements corresponding to the service limitations noted in the vessels classification which have been specifically approved for the particular service. Compliance with requirements is a condition of classification for vessels, for which the equipment number
29、(EN) calculated in accordance with 3-5-1/3.1 of the Rules for Building and Classing Steel Vessels is equal to or greater than 205. Vessels intended for towing operation or vessels for which EN is less than 205 are not required to have as a condition of classification. (See 3-5-1/7 of the Rules for B
30、uilding and Classing Steel Vessels Under 90 meters (295 feet) in Length.) REFERENCES 1-1-3/11 of: Rules for Building and Classing Steel Vessels Rules for Building and Classing Steel Vessels Under 90 Meters (295 Feet) in Length 1-1-3/9 of: Rules for Building and Classing Mobile Offshore Drilling Unit
31、s Rules for Building and Classing Steel Barges 1.1.6 of: Rules for Building and Classing Aluminum Vessels 1.6.5 of: Rules for Building and Classing Reinforced Plastic Vessels 1-1-3/9 of: Guide for Building and Classing High Speed Naval Craft 1/1.3.6 of: Guide for Building and Classing High Speed Cra
32、ft 1.11.2 of: Guide for Building and Classing Motor Pleasure Yachts, etc. REMARKS Classification Symbol Applicable for temporary mooring of vessels within a harbor or other area of sheltered water Example A1, Oil Carrier, Copyright American Bureau of Shipping Provided by IHS under license with ABS L
33、icensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:26:45 MDTNo reproduction or networking permitted without license from IHS -,-,- ABSABS Notations and Symbols 3 November 2003 (Updated on 21 July 2004) Common Notations and Symbols NOTATION A1 (Special Purpose) DESCRIPTION The symbols A1 A1 f
34、ollowed by a Notation of the trade for which specific arrangements and scantlings have been approved (i.e. Ferry Service, Dredging, Fishing, etc.) and to which the special purpose vessels have been built to the satisfaction of the Surveyors to the Bureau. REFERENCES 1-1-3/5 of: Rules for Building an
35、d Classing Steel Vessels Rules for Building and Classing Steel Vessels Under 90 Meters (295 Feet) in Length 1/1.3.3 of: Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways 1.1.3 of: Rules for Building and Classing Aluminum Vessels 1.6.2 of: Rules for Buildi
36、ng and Classing Reinforced Plastic Vessels 1/1.3.3 of: Guide for Building and Classing High Speed Craft REMARKS Class Notation Example A1 Ferry Service A1 Dredging, etc. Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2
37、008 20:26:45 MDTNo reproduction or networking permitted without license from IHS -,-,- ABSABS Notations and Symbols 3 November 2003 (Updated on 21 July 2004) Common Notations and Symbols NOTATION A1 (Geographical Limitations) DESCRIPTION The symbols A1 A1 followed by a notation of the service limita
38、tions is to be assigned to vessels, which have been built to the satisfaction of Surveyors to the Bureau to specific requirements for restricted service, which have been approved by the ABS Classification Committee for the particular service. (e.g. Gulf of Mexico, Philippine Inter-Island Service, Co
39、astal Service Less than 25 Miles, etc.) REFERENCES 1-1-3/7 of: Rules for Building and Classing Steel Vessels Rules for Building and Classing Steel Vessels Under 90 Meters (295 Feet) in Length 1.1.4 of: Rules for Building and Classing Aluminum Vessels 1.6.3 of: Rules for Building and Classing Reinfor
40、ced Plastic Vessels 1/1.3.4a of: Guide for Building and Classing High Speed Craft REMARKS Class Notation Example A1 Ferry, Inter-Island Service, Copyright American Bureau of Shipping Provided by IHS under license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:26:45 MDTNo reprod
41、uction or networking permitted without license from IHS -,-,- ABSABS Notations and Symbols 3 November 2003 (Updated on 21 July 2004) Common Notations and Symbols NOTATION AMS DESCRIPTION AMS is a classification notation that, together with the Maltese Cross symbol, indicates that a vessels machinery
42、, boilers and systems have been constructed and installed under survey by the Bureau in accordance with the requirements of the ABS Rules. The AMS notation is intended for all new construction of ABS classed self-propelled vessels and offshore units. REFERENCES 1-1-3/13 of: Rules for Building and Cl
43、assing Steel Vessels Rules for Building and Classing Steel Vessels Under 90 Meters (295 Feet) in Length, Rules for Building and Classing Mobile Offshore Drilling Units 1/1.3.5 of: Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways 31.1 of: Rules for Buildi
44、ng and Classing Aluminum Vessels 1.6.6 of: Rules for Building and Classing Reinforced Plastic Vessels 1-1-3/11 of: Guide for Building and Classing High Speed Naval Craft 1/1.3.7 of: Guide for Building and Classing High Speed Craft 1.11.3a of: Guide for Building and Classing Motor Pleasure Yachts, et
45、c. REMARKS Classification notation whose meaning is the same within all ABS Rules and Guides as regards to indicating compliance with machinery related requirements on self-propelled vessels and offshore units. Example A1 Oil Carrier, , AMS Copyright American Bureau of Shipping Provided by IHS under
46、 license with ABS Licensee=Boeing Co/5910770001 Not for Resale, 08/07/2008 20:26:45 MDTNo reproduction or networking permitted without license from IHS -,-,- ABSABS Notations and Symbols 3 November 2003 (Updated on 21 July 2004) Common Notations and Symbols NOTATION AMS DESCRIPTION The AMS notation,
47、 without the Maltese Cross symbol, is assigned to self-propelled vessels and offshore units for which the machinery, boilers and systems have not been constructed and installed under survey by the Bureau, but are found satisfactory with regard to ABS requirements. REFERENCES 1-1-3/15 of: Rules for B
48、uilding and Classing Steel Vessels Rules for Building and Classing Steel Vessels Under 90 Meters (295 Feet) in Length 1/1.3.6 of: Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways 31.3 of: Rules for Building and Classing Aluminum Vessels 1.6.7 of: Rules for Building and Classing Reinforced Plastic Vessels 1-1-3/13 of: Guide for Building and Classing H