《AA-PD-1-2001.pdf》由会员分享，可在线阅读，更多相关《AA-PD-1-2001.pdf（92页珍藏版）》请在三一文库上搜索。
1、North American Aluminum Industrv Plant Di Second Edition December 2001 rectory The Aluminum Association, Inc. Copyright The Aluminum Association Inc. Provided by IHS under license with AA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 02:51:08 MDTNo reproduction or n
2、etworking permitted without license from IHS -,-,- North American Aluminum Industry Plant Directory Second Edition December 2001 The Aluminum Association, Inc. Suite 300 Washington, DC 20006 900 19 Street, NW - (202) 862-51 O 0 Copyright 2001, The Aluminum Association, Inc. unauthorized reproduction
3、 by photocopy or any other method is prohibited by law. Copyright The Aluminum Association Inc. Provided by IHS under license with AA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 02:51:08 MDTNo reproduction or networking permitted without license from IHS -,-,- The
4、 information presented herein is based on surveys and research conducted by The Aluminum Association, Inc. during 2001. In some cases, a company or plant may not have responded to our surveys, in which case, The Aluminum Association attempted to verify a companys information through “open” or “other
5、 source” materials. While we have attempted to identify every aluminum plant within Canada, Mexico, and the United States (including Puerto Rico), we do not guarantee the accuracy of completeness of our information. Aluminum Association staff members Henry F. Sattlethight, Jennifer Thangavelu, and N
6、icholas A. Adams, Jr. prepared the directorys information. Assistance was provided by members of Aluminum Association product divisions and the Statistical and Market Research Committee. The Aluminum Association, Inc. is the trade association for producers of primary aluminum, aluminum recyclers, an
7、d semi-fabricated aluminum products. Based in Washington, D.C., with offices in Detroit, Michigan, the Association provides leadership to the industry through its programs and services which aim to enhance aluminums position in a world of proliferating materials, increase its use as the “material of
8、 choice,” remove impediments to its fullest use, and assist in achieving the industrys environmental, societal, and economic objectives. As of November 2001, member companies operate 216 plants in North America and many conduct business worldwide. Copyright The Aluminum Association Inc. Provided by
9、IHS under license with AA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 02:51:08 MDTNo reproduction or networking permitted without license from IHS -,-,- North American Aluminum Industry Plant Directory 1 Table of Contents Section Introduction and Maps Map 1 : U.S.
10、 Primary 501 262-3420 Fax: 501 262-3555 Audubon Metals 3055 Ohio Drive Henderson, KY 42420 Phone: 270 830-6622 Fax: 270 830-9987 . The Aluminum Association, Inc. Copyright The Aluminum Association Inc. Provided by IHS under license with AA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for
11、 Resale, 04/18/2007 02:51:08 MDTNo reproduction or networking permitted without license from IHS -,-,- 34 North American Aluminum Industry Plant Directory Recycled Aluminum Ingot Behr Metals Company Wholly Owned Subsidiary of Joseph Behr does not operate extrusion presses. The Aluminum Association,
12、Inc. Copyright The Aluminum Association Inc. Provided by IHS under license with AA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 02:51:08 MDTNo reproduction or networking permitted without license from IHS -,-,- North American Aluminum Industry Plant Directory 63 Al
13、can Cable Alcan Cable Division 409 Reighard Avenue Williamsport, PA 17701-4195 Phone: 570 326-3771 Fax: 570 321 -7702 Alcan Cable Lapointe Works 2040 Rue de Neuville, P.O. Box 1638 Jonquiere, Quebec G7S 4L3 Canada Phone: 418 699-2155 Fax: 418 699-3061 Alcoa Engineered Products Massena Operation Park
14、 Avenue East Massena, NY 13662 Phone: 315 764-401 1 Fax: 31 5 764-4203 Alcoa Inc. Alcoa Primary Metals Baie-Comeau Reduction Plant 100 Route Maritime Baie-Comeau, Quebec G4Z 2L6 Canada Phone: 418 296-331 1 Fax: 418 296-7121 Alcoa Inc. Alcoa Primary Metals Reybec 6900 boul. Raoul Duchesne Becancour,
15、Quebec G98 222 Canada Phone: 81 9 294-2900 Fax: 81 9 294-1 056 Alcoa Inc. Alcoa Primary Metals Rockdale Works FM 1786 Near San Dow Rockdale, TX 76567 Phone: 512 446-8856 Fax: 51 2 446-8466 Drawing Stock Kaiser Aluminum or any other bare stranded aluminum conductor. ATOMIZED POWDER - Powder produced
16、by blowing or aspirating molten metal through an orifice. CASTING - A product made by pouring molten metal into a mold of a desired shape and letting it solidify. DEOXIDATION INGOT - Aluminum recovered from scrap used for steel deoxidizer products. End product may take the following shapes: granules
17、, shot, cones, stars, or pyramid shapes. DRAWING STOCK (REDRAW ROD, round product that is long in relation to cross section, 0.375” or greater in diameter, produced by continuous casting followed by size-rolling, or by rolling from D.C. cast ingot, suitable for drawing into wire. CONTINUOUS CAST, OR
18、 ROLLED) - A Solid DRAWN TUBE - A hollow product that is long in relation to its cross section, which is round, square, rectangular, hexagonal, octagonal, or elliptical in shape, and brought to final dimensions by drawing. DROSS AND SKIMMINGS -The mixture of oxides and other impurities which float t
19、o the surface of molten aluminum and is skimmed off. EXTRUDED PIPE AND TUBE -A hollow product, formed by extruding, that is long in relation to its cross section, which is round, square, rectangular, hexagonal, octagonal, or elliptical in shape. EXTRUDED ROD AND BAR - A solid product, produced by ex
20、truding (sometimes brought to final dimensions by drawing), that is long in relation to cross section, which is round, square, rectangular, hexagonal, or octagonal in shape and 0.375” or greater in diameter or in at least one perpendicular distance between parallel faces. EXTRUDED SHAPES - Products
21、produced by extruding, that is long in relation to its cross- sectional dimensions and has a cross section other than that of rod and bar and pipe and tube. EXTRUSION INGOT (BILLET) - A solid or hollow cast form, usually cylindrical, suitable for extruding. FLAKED POWDER - Powder consisting of flat
22、or scale-like particles of a thickness small compared with other dimensions, produced by milling in the presence of a lubricant. FOIL -A flat rolled product, rectangular in cross section, of thickness less than 0.006. FORGINGS (EXCLUDING IMPACT EXTRUSIONS) - A product worked to a predetermined shape
23、 by one or more processes such as hammering, upsetting, pressing, etc. IMPACTS (EXCLUDING COLLAPSIBLE TUBES AND CANS) - A product formed in a confining die from metal slug, usually cold, by rapid single stroke application of force through a punch, causing the metal to flow around the punch and/or th
24、rough an opening in the punch or die. INGOT - A large solid bar of aluminum cast from molten aluminum. Its shape is determined by its intended remelting or fabricating use: rolling, forging, extrusion, or foundry. MASTER ALLOY -An aluminum base alloy containing some aluminum and one or more added el
25、ements for use in making alloying additions to molten aluminum. MILL (SEMIFABRICATED) PRODUCTS - Metal that has been fashioned into an intermediate or semifabricated form in preparation for making a finished product. Example: sheet, a mill product, is used to make residential siding, a finished prod
26、uct. PASTE -A blend of powder or flake with a thinner or plasticizer. The Aluminum Association, Inc. Copyright The Aluminum Association Inc. Provided by IHS under license with AA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 02:51:08 MDTNo reproduction or networking
27、 permitted without license from IHS -,-,- 86 North American Aluminum Industry Plant Directory Glossary PLATE, HEAT-TREATABLE -A flat rolled product, in 2000, 6000, or 7000 alloy series (except 7072), rectangular in cross section, 0.250“ or greater in thickness, which can be strengthened by a suitabl
28、e thermal treatment. PLATE, NONHEAT-TREATABLE - A flat rolled product, rectangular in cross section, 0.250“ or greater in thickness, which can be strengthened only by cold work. SHEET, HEAT-TREATABLE -A rolled product, in 2000, 6000, or 7000 alloy series (except 7072), flat or coiled, rectangular in
29、 cross section, of 0.006“ thickness but under 0.250“ thickness, which can be strengthened by a suitable thermal treatment. SPECIFICATION ALLOY INGOT - Aluminum recovered from scrap of various sources to produce a specific alloy ingot for a customer. POWDER -An aggregate of discrete particles of alum
30、inum, substantially all of which are finer than 1,000 microns (minus 18 mesh). PRIMARY ALUMINUM - Aluminum produced by the reduction of alumina by electrolysis in a molten salt bath which dissolves the alumina. WIRE, BARE, CONDUCTOR AND NONCONDUCTOR -A solid wrought product that is long in relation
31、to its cross section, which is square, round, rectangular, hexagonal, or octagonal in shape, whose diameter or greatest perpendicular distance between parallel faces (except for flattened wire) is less than 0.375“. REMELT SECONDARY INGOT -Aluminum scrap recycled into an intermediate product without
32、a specific chemical composition. WIRE AND CABLE, INSULATED OR COVERED - Aluminum electrical conductor wire or stranded conductors that are insulated or covered. ROD AND BAR (CONTINUOUS-CAST OR ROLLED) - A solid, round, square, rectangular, hexagonal, or octagonal shape produced by continuous casting
33、 or rolling, that is long in relation to cross section, 0.375“ or greater in diameter or in at least one perpendicular distance between parallel faces; other than redraw rod and D.C. cast ingot. SCRAP - Includes: New (prompt industrial) scrap, purchased, imported, or treated on toll, in all forms; a
34、nd Old (post consumer or obsolete) scrap, including sweated pig; also remelt scrap ingot (RSI) which is considered scrap until remelted and cast into specification ingot. SECONDARY SMELTER -A company whose facilities are exclusively devoted to producing ingot or molten aluminum from scrap. SHEET, NO
35、NHEAT-TREATABLE - A rolled product, flat or coiled, rectangular in cross section, of 0.006“ thickness but under 0.250“ thickness, which can be strengthened only by cold work. The Aluminum Association, Inc. Copyright The Aluminum Association Inc. Provided by IHS under license with AA Licensee=IHS Emp
36、loyees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 02:51:08 MDTNo reproduction or networking permitted without license from IHS -,-,- North American Aluminum Industw Plant Directory 87 Statistical Reports and Publications Aluminum Statistical Review for 2000 This 64-page compilation, pu
37、blished in August 2001, provides important statistical data concerning the aluminum industry. It is used as a reference tool by industry members, government agencies, students, financial analysts, and the general public. The text, tables, and charts provide year-end figures and other historical data
38、 on US. shipments, markets, supply, and foreign trade. The Review also includes a section on world aluminum statistics. It is available in book for and/or CD-ROM (text in Adobe Acrobat, tables in Excel spreadsheet). Please specify format when ordering. To order, call (301) 645- 0756. Code: H R-94-48
39、2 1 O 1 Member Cost: Non-Member Cost: $50 (book) $75 (CD-ROM), $100 (set) $100 (book), $150 (CD-ROM), $200 (set) North American Aluminum Industry Extrusion Press Directory (July 2000) The first edition of the North American Aluminum Industry Extrusion Press Directory lists approximately 522 aluminum
40、 extrusion presses at 214 plants operated by 140 companies in Canada, Mexico, and the United States. Plants are listed in alphabetical order by country, and sorted by state and products. Also includes each companys finishing and fabrication services. (71 pages) Code: EXPD-1-482121 Member Cost: $50.0
41、0 Non-Member Cost: $100.00 Note: second edition is scheduled for release Spring 2002. End Use Guide for Reporting Shipments of Fabricated Aluminum Products The Aluminum Associations End Use Reporting System is designed as a classification system for The Aluminum Associations End Use Report series. I
42、t provides reporting companies with guidelines for uniform and systematic coding of aluminum product shipments. (36 pages) Code: EU-I -4821 20 Member Cost: $16.00 Non-Member Cost: $25.00 U.S. Exports & Imports of Aluminum (by Commodity, by Country) Monthly and quarterly editions of this report, avai
43、lable on an annual subscription basis, offer the latest import and export information on aluminum ingot, semifabricated products, and scrap. Countries of origin and/or destination are identified. Contact The Aluminum Associations Statistical Department for subscription information. The Aluminum Situ
44、ation This newsletter is a monthly summary of recent data on U.S. aluminum production, shipments, orders, inventories, and foreign trade. It contains tables and graphs for quick reference. Contact The Aluminum Associations Statistical Department for subscription information. The Aluminum Association
45、, Inc. Copyright The Aluminum Association Inc. Provided by IHS under license with AA Licensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 04/18/2007 02:51:08 MDTNo reproduction or networking permitted without license from IHS -,-,- 88 North American Aluminum Industry Plant Directow S
46、tatistical Reports and Publications Monthly Reports Electrical Conductor Shipments Extruded Products Shipments and Press Utilization Foil Shipments Forgings & Impacts Shipments Index of Net New Order Receipts for Aluminum Mill Products New Can Stock (Class) Scrap Receipts Primary Aluminum Production
47、 Rod, Bar & Wire Shipments Sheet, Plate & Can Stock Shipments Summary of Industry Shipments and Inventories The Aluminum Situation Used Beverage Can Reclamation Quarterly Reports Fin Stock Shipments by End Use Foundry Castings Shipments Master Alloys Shipments Mill Products Shipments by End Use Shee
48、t & Plate series Foil series Extrusion series Annual Reports Flat Roll Capacity Primary Installed Capacity Occupational Injury & Illness Foreign Trade Reports US. Imports & Exports by Commodity Summary (Monthly) U.S. Imports & Exports by Commodity, by Country (Monthly) U.S. Imports & Exports by Commodity, by Country (Quarterly) U.S. Imports & Exports by Commodity, by Country 5-year history (Annual) Ordering information is available on The Aluminum Associations web site, www.aluminum.org. The Aluminum Association, Inc. Copyright