《ANSI-INCITS-TR-16-1997.pdf》由会员分享，可在线阅读，更多相关《ANSI-INCITS-TR-16-1997.pdf（174页珍藏版）》请在三一文库上搜索。
1、INCITS TR-16-1997 Information Technology SCSI-3 Generic Packetized Protocol (SCSI-GPP) Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 12:37:08 MDTNo reproduction or networking
2、 permitted without license from IHS -,-,- X3/TR-16-1997 Revision 9 of X3-991 D X3 Technical Report - Small Computer System Interface - 3 Generic Packetized Protocol (SCSI-GPP) Secretariat Computer and Business Equipment Manufacturers Association Abstract SCSI-3 Generic Packetized Protocol (SCSI-3 GP
3、P) defines a transport protocol that per- mits an inter-operable common mapping of the Small Computer System Interface - 3 (SCSI-3) functions to several physical interfaces that do and do not have a native SCSI-3 protocol mapping. In support of such heterogeneous sytems environments (e.g., SCSI-3 pa
4、rallel interface, Fibre Channel, and Internet), some implementors may choose to use GPP as an alternate protocol to provide common software and transportation services across several interfaces. Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Empl
5、oyees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 12:37:08 MDTNo reproduction or networking permitted without license from IHS -,-,- X3s Technical Report Series This Technical Report is one in a series produced by the Accredited Standards Committee, X3, Information Technology. The S
6、ecretariat for X3 is held by the Information Technology Industry Council (ITI), 1250 Eye Street, NW, Suite 200, Washington, DC 20005. As a by-product of the standards development process and the resources of knowledge devoted to it, X3 from time to time produces Technical Reports. Such Technical Rep
7、orts are not standards, nor are they intended to be used as such. X3 Technical Reports are produced in some cases to disseminate the technical and logical con- cepts reflected in standards already published or under development. In other cases, they derive from studies in areas where it is found pre
8、mature to develop a standard due to a still-changing technology, or inappropriate to develop a rigorous standard due to the existence of a number of viable options, the choice of which depends on the users particular requirements. These Technical Reports, thus, provide guidelines, the use of which c
9、an result in greater consistency and coherence of information processing systems. When the draft Technical Report is completed, the Technical Committee approval process is the same as for a draft standard. Processing by X3 is also similar to that for a draft standard. CAUTION: The developers of this
10、 technical report have requested that holders of patents that may be required for the implementation of the technical report disclose such patents to the publisher. However, neither the developers nor the publisher have undertaken a patent search in order to identify which, if any, patents may apply
11、 to this technical report. As of the date of publication of this technical report, following calls for the identification of patents that may be required for the implementation of the technical report, notice of one or more such claims has been received. By publication of this technical report, no p
12、osition is taken with respect to the validity of this claim or of any rights in connection therewith. The known patent holder(s) has (have), however, filed a statement of willingness to grant a license under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring
13、 to obtain such a license. Details may be obtained from the publisher. No further patent search is conducted by the developer or publisher in respect to any technical report it processes. No representation is made or implied that this is the only license that may be required to avoid infringement in
14、 the use of this technical report. Published by American National Standards Institute 11 West 42nd Street, New York, New York 10036 Copyright 01 997 by American National Standards Institute All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval sys
15、tem or otherwise, without prior written permission of the publisher. Printed in the United States of America Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 12:37:08 MDTNo repr
16、oduction or networking permitted without license from IHS -,-,- SCSI-3 GPP REV 9. January 12. 1995 Contents Page Foreword ix Introduction . 1 Scope 1 1.1Application 1 1.2 Structure . 2 1.3 Relationship to standards 2 2References 5 5 3 Definitions. abbreviations and symbols 7 3.1 Definitions 7 3.2 Ab
17、breviations and symbols 9 4General 12 4.1Overview 12 4.2Convention.s . 12 4.3 Logical system description 13 4.4 Description of logical operations . 13 4.5 Statement of support for SAM requirements 16 4.6 Logical system model 16 I Copyright American National Standards Institute Provided by IHS under
18、license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 12:37:08 MDTNo reproduction or networking permitted without license from IHS -,-,- SCSI-SCSI-3 GPP REV 9. January 12.1995 4.7 Mandatory requirements 20 5 GPP Tasks and Task management . 22 5.1.1 Par
19、ameter requirements (mandatory) . 22 5.1.2 Task sense data (mandatory) 23 5.1.3 GPP identification (mandatory) . 23 5.1.3.2 Target identification (mandatory) 24 5.1 -3.4 GPP port number (mandatory) 24 5.1.4 Commands (mandatory) 24 5.1.5 Status (mandatory) . 25 5.2 Task Set management (mandatory) 26
20、5.3 Task termination (mandatory) . 27 5.3.1 Normal Task termination 28 5.3.2 Abnormal Task termination 28 5.3.2.1 Initiator-caused Task termination 28 5.3.2.2 Target-caused Task termination . 28 5.4 Assignment termination (mandatory) . 28 5.5 Path group operations . 28 5.5.1 Single path mode (mandat
21、ory) . 28 5.5.2 Multiple path mode (optional) . 29 5.5.3 Single path status (mandatory) . 29 5.5.4 Multiple path status (optional) 29 5.5.5 Path group disbanding (optional) 29 5.1Tasks 22 5.1.3.1 Initiator identification (mandatory) . 23 5.1.3.3 GPP address for a port (mandatory) . 24 5.1.3.5 Logica
22、l unit identification (mandatory) 24 5.1.6 Asynchronous Event Notification (mandatory) . 25 5.1.7 Auto-Contingent Allegiance (mandatory) . 26 6 GPP Information Packet structure . 30 6.1 Information Packet layout 30 6.2 Interface control prefix . 31 6.3.1 Message ILE 36 6.3 Interface Logical Elements
23、 (ILEs) 35 6.3.2 Command descriptor block ILE . 36 6.3.3 Command parameter data ILE . 37 6.3.4 Command response data ILE 37 6.3.5 Logical data ILE . 37 6.3.6 Status ILE 37 6.3.7 Autosense ILE 37 7 GPP task control 39 7.1 Message structure 40 7.2 GPP primary messages 43 7.2.1 ABORT TASK . 43 7.2.2 AB
24、ORT TASK SET . 43 7.2.3ASSlGN 43 ii Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 12:37:08 MDTNo reproduction or networking permitted without license from IHS -,-,- SCSI-3 GP
25、P REV 9. January 12. 1995 7.2.3.1 Extent assignment 46 7.2.3.2 Element assignment 48 7.2.3 CLEAR ACA 49 7.2.4 CLEAR TASK SET . 49 7.2.5 CONTROL ACCESS 50 7.2.6 EXTENDED MESSAGE REJECT . 52 7.2.7 INVALID INFORMATION PACKET 54 7.2.8 LINKED COMMAND COMPLETE . 55 7.2.9 LINKED COMMAND COMPLETE (WITH FLAG
26、) . 55 7.2.10 MODIFY DATA POSITION 55 7.2.1 1 PACKET TRANSFER REQUEST 56 7.2.12 REPORT PATH STATUS . 58 7.2.1 4 RESEND PREVIOUS INFORMATION PACKET 60 7.2.1 5 SET WWN . 61 7.2.1 6 TARGET RESET 64 7.2.1 7 TASK COMPLETE 65 7.2.1 8 TASK WAITING . 65 7.2.1 9 TERMINATE TASK 66 7.2.20 UNASSIGN 67 8 GPP ser
27、vices for a logical element 70 8.1 GPP services introduction 70 8.1.1 Logical element-to-GPP services introduction . 70 8.1.2 GPP services-to-SDS introduction . 70 8.2 GPP-device-to-GPP services 71 8.2.1 GPP-TASK.reque.9 72 8.2.1.1 Semantics . 72 8.2.1.2 When generated . 74 8.2.1.3 Effect of receipt
28、 74 8.2.1.4 GPP-TASK.request parameter usage 75 8.2.1.5 Task-Element-List parameter usage . 76 8.2.1.6 Element-Descriptor parameter usage 78 8.2.1.7 ScatterIGather List (SG-LIST) parameter usage 82 8.2.2 GPP-TASK-TAG.indication 82 8.2.2.1 Semantics . 82 8.2.2.2 When generated . 83 8.2.2.3 Effect of
29、receipt 83 8.2.2.4 GPP services managed parameters 83 8.2.3 GPP-TASK.indication . 83 8.2.3.1 Semantics . 83 8.2.3.2 When generated . 84 8.2.3.4 Effect of receipt 84 8.2.3.5 GPP services managed parameters 84 8.2.3.6 GPP-TASK.indication semantics 85 8.2.4 GPP-TASK.confirmation 87 8.2.4.1 Semantics .
30、87 8.2.4.2 When generated . 87 8.2.4.3 Effect of receipt 87 8.2.4.4 GPP services managed parameters 87 8.3 GPP services-to-SDS 88 ANNEXA 89 A.l Fibre Channel definitions for GPP 89 A.2 Fibre Channel specific messages 91 A.3 Fibre Channel physical description for GPP 92 A.4 FC-PH encapsulation of an
31、Information Packet . 93 iii Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 12:37:08 MDTNo reproduction or networking permitted without license from IHS -,-,- SCSI-SCSI-3 GPP R
32、EV 9. January 12. 1995 A.4.1 Information unit 93 A.4.2 FC-PH Information Unit management 94 A.4.3 GPP FC-PH responses and signals . 94 AS GPP services to FC-PH Information Unit services . 95 A.5.1 FC-PH-SEQUENCE.request 96 A.5.1.1 Semantics 96 A.5.1.2 When generated . 96 A.5.1.3 Effect of receipt 96
33、 A.5.1.4 Function parameter usage . 97 A.5.1.5 FC-PH managed parameters . 99 A.5.2 FC-PH-SEQUENCETAG.indication . 99 A.5.2.1 Semantics 99 A.5.2.2 When generated 100 A.5.2.3 Effect of receipt . 100 A.5.2.4 FC-PH managed parameters 100 A 5 3 FC-PH-SEQUENCE.indication . 100 A.5.3.1 Semantics . 100 A.5.
34、3.2 When generated 101 A.5.3.3 Effect of receipt . 101 A.5.3.4 FC-PH managed parameters 102 A.5.4 FC-PH-SEQUENCE.confirmation . 103 A.5.4.1 Semantics . 103 A.5.4.2 When generated 103 A.5.4.3 Effect of receipt . 103 A.5.4.4 FC-PH managed parameters 103 A.6FC-PHevents . 104 A.6.1 FC-PH unexpected disc
35、onnect event . 104 A.6.2 FC-PH unsuccessful Information Unit transfer event . 104 A.6.3 FC-PH unsuccessful Information Packet transfer condition . 104 ANNEXB . 106 B.l Introduction to the GPP FC-4 Exchange protocol 106 B.2 GPP FC-PH Exchange protocol 108 8.2.1 FC-PH Information Units . 108 8.2.2FC-P
36、HExchanges 108 8.2.3 Transport layer independence 109 ANNEXC . 111 C.l SPI physical description 111 C.2 SPI specific messages . 112 C.2.1 INVALID BUS PHASE DETECTED 113 C.2.2 PARITY ERROR . 114 C.2.3 SYNCHRONOUS DATA TRANSFER REQUEST . 115 C.3 GPP services to SPI information tra.nsfer services . 116
37、 C.3.1 SPlSEQUENCE.request 117 C.3.1.1 Semantics . 117 C.3.1.2 When generated 118 C.3.1.3 Effect of receipt . 118 C.3.1.4 Function parameter usage 118 C.3.1.5 SPI managed parameters 119 C.3.2 SPI-SEQUENCETAG.indication 119 C.3.2.1 Semantics . 119 C.3.2.2 When generated 119 C.3.2.3 Effect of receipt
38、. 119 C.3.2.4 SPI managed parameters 119 C.3.3 SPI-SEQUENCE.indication 119 iv Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 12:37:08 MDTNo reproduction or networking permitte
39、d without license from IHS -,-,- SCSI-3 GPP REV 9. January 12.1995 C.3.3.1 Semantics . 120 C.3.3.2 When generated . 120 C.3.3.3 Effect of receipt . 120 C.3.3.4 SPI managed parameters . 120 C.3.4 SPI-SEQUENCE.confirmation 121 C.3.4.1 Semantics . 121 C.3.4.1 When generated 121 C.3.4.2 Effect of receip
40、t . 121 C.3.4.3 SPI managed parameters . 121 C.4.1 SPI BUS FREE phase . 122 C.4.2 SPI ARBITRATION phase 122 C.4.3 SPI SELECTION phase 122 C.4.4 SPI SELECTION time-out procedure . 123 C.4.4.1 SPI asynchronous information transfer (mandatory) 123 C.4.4.2 SPI synchronous data transfer (mandatory) 123 C
41、.4.4.3 SPI wide data transfer (mandatory) . 123 C.4.5 SPI DATA OUT information transfer phase 123 C.4.6 GPP versus SIP operating mode . 124 C.4 GPP implemented SPI bus phases 122 C.5 SPI events . 125 C.5.1 SPI attention event 125 C.5.2 SPI reset event . 126 C.5.3 SPI disconnect event 126 ANNEXD . 12
42、8 D.l Operation notes . 128 D.2 Application examples . 128 D.2.1 Migration to new interfaces . 129 D.2.2 High availability environments . 129 D.2.3 Processor-type clusters 129 D.2.4 Third-party operations . 129 AnnexE 130 E.l IP specific messages . 130 E.3 TCP/IP services . 131 E.4 TCP/IP support of
43、 SAM . 131 E.4.1 IP header 132 E.4.2 TCP header 132 E.4.3 TCP/IP header overhead 133 E.5 Service interface from GPP to TCP/IP 133 E.2 Encapsulation of an information packet 131 AnnexF 134 F.1 Error Management . 134 F.2 The value of the sliding window . 135 F.3Performance 136 Annex G 137 G.l HIC defi
44、nitions for GPP . 137 (3.2 HIC specific messages . 138 G.3 HIC physical description for GPP . 138 G.3.1 Destination ID assignment and Destinations . 138 G.3.2 No acknowledgement of packet delivery 139 (3.3.3 Order of delivery of packet contents 139 G.3.4 Order of delivery of independent packets 139
45、G.3.5 Relationship of a packet to an Information Packet . 140 V Copyright American National Standards Institute Provided by IHS under license with ANSI Licensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 12:37:08 MDTNo reproduction or networking permitted without lice
46、nse from IHS -,-,- SCSI-SCSI-3 GPP REV 9. January 12. 1995 G.3.6 Managing the order of execution of commands with HIC . 140 G.3.7 Simple GPP service delivery subsystem with HIC 141 G.4 HIC encapsulation of an Information Packet 142 G.4.1 HIC packet 142 G.4.2 Information Packet management 143 G.5 GPP
47、 services to HIC Link Level services . 143 G.5.1 HIC-PACKET.request . 143 G.5.1.1 Semantics . 144 G.5.1.2 When generated 144 (3.5.1.3 Effect of receipt . 144 G.5.1.4 Function parameter usage 144 G.5.1.5 LL managed parameters . 145 G.5.2 HIC-PACKET.indication . 145 G.5.2.1 Semantics . 145 G.5.2.2 Whe
48、n generated 145 G.5.2.3 Effect of receipt . 145 G.5.2.4 LL managed parameters . 146 G.5.3 HIC-PACKET.confirmation . 146 G.5.3.1 Semantics . 146 G.5.3.2 When generated 146 G.5.3.3 Effect of receipt . 146 G.5.3.4 LL managed parameters . 146 G.6 HIC events . 147 G.6.2 LL unexpected disconnect event 147 66.3 LL unsuccessful Information Packet transfer condition . 147 G.4.3 HIC responses and signals . 143 AnnexH 148 H.l Introduction to the GPP HIC packet protocol 148 H.2 GPP transaction protocol . 149 H.2.2 Transport layer independence 149 H.2.1 HIC packets .