《ASSE-A10.38-1996-R2005.pdf》由会员分享，可在线阅读，更多相关《ASSE-A10.38-1996-R2005.pdf（35页珍藏版）》请在三一文库上搜索。
1、AMERICANSOCIETY OF SAFETYENGINEERS AMERICANNATIONALSTANDARD (R2005)ANSI/ASSE A10.39-1996 ANSI/ASSE A10.39-1996 (R2005) ANSI/ASSE A10.39-1996 (R2005) American National Standard for Construction and Demolition Operations Construction Safety and Health Audit Program Copyright American Society of Safety
2、 Engineers Provided by IHS under license with ASSE/SAFE Licensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 03:35:41 MSTNo reproduction or networking permitted without license from IHS -,-,- Additional A10 Standards available from ASSE ANSI/ASSE A10.3 Powder-Actuated
3、Fastening Systems ANSI/ASSE A10.4 Personnel Hoists and Employee Elevators ANSI/ASSE A10.6 Safety Requirements for Demolition Operations ANSI/ASSE A10.7 Safety Requirements for Transportation, Storage, Handling, and Use of Commercial Explosives and Blasting Agents ANSI/ASSE A10.8 Scaffolding Safety R
4、equirements ANSI/ASSE A10.9 Safety Requirements for Concrete and Masonry Construction ANSI/ASSE A10.10 Safety Requirements for Temporary and Portable Space Heating Devices ANSI/ASSE A10.11 Safety Requirements for Personnel and Debris Nets ANSI/ASSE A10.12 Safety Requirements for Excavation Operation
5、s on Construction and Demolition Sites ANSI/ASSE A10.13 Safety Requirements for Steel Erection ANSI/ASSE A10.15 Safety Requirements for Marine Dredging ANSI/ASSE A10.16 Safety Requirements for Tunnels, Shafts, and Caissons ANSI/ASSE A10.18 Safety Requirements for Temporary Floor Holes, Wall Openings
6、, Stairways, and Other Unprotected Edges ANSI/ASSE A10.22 Safety Requirements for Rope-Guided and Non-Guided Workers Hoists ANSI/ASSE A10.27 Safety Requirements for Hot Mix Asphalt Facilities ANSI/ASSE A10.28 Safety Requirements for Work Platforms Suspended from Cranes or Derricks ANSI/ASSE A10.31 S
7、afety Requirements for Digger-Derricks ANSI/ASSE A10.32 Safety Requirements for Fall Protection Systems for Construction Industry Users ANSI/ASSE A10.33 Safety and Health Program Requirements for Multi-Employer Projects ANSI/ASSE A10.34 Safety Requirements for Protection of the Public on or Adjacent
8、 to Construction and Demolition Sites ANSI/ASSE A10.37 Safety Requirements for Debris Net Systems Used During Construction and Demolition Operations ANSI/ASSE A10.38 Basic Elements of an Employers Program to Provide a Safe and Healthful Work Environment ANSI/ASSE A10.39 American National Standard fo
9、r Construction and Demolition Operations Safety and Health Audit Program ANSI/ASSE A10.42 Rigging Qualifications and Responsibilities in the Construction and Demolition Industry To purchase any of these A10 Standards as well as other ANSI Standards visit our web site at www.asse.org or call us at 84
10、7-699-2929. The information and materials contained in this publication have been developed from sources believed to be reliable. However, the American Society of Safety Engineers (ASSE) as secretariat of the ANSI accredited A10 Committee or individual committee members accept no legal responsibilit
11、y for the correctness or completeness of this material or its application to specific factual situations. By publication of this standard, ASSE or the A10 Committee does not ensure that adherence to these recommendations will protect the safety or health of any persons, or preserve property. Copyrig
12、ht American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 03:35:41 MSTNo reproduction or networking permitted without license from IHS -,-,- ANSI ANSI A10.39 1996 (R2005) American National
13、Standard Construction and Demolition Operations Construction Safety and Health Audit Program Secretariat American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 Approved May 19, 2005 American National Standards Institute, Inc. Copyright American Society of Safet
14、y Engineers Provided by IHS under license with ASSE/SAFE Licensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 03:35:41 MSTNo reproduction or networking permitted without license from IHS -,-,- Approval of an American National Standard requires verification by ANSI that
15、 the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substant
16、ial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not i
17、n any respect preclude anyone, whether he/she has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstance gi
18、ve an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretation should be addressed to the secretariat or sp
19、onsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute requires that action be taken periodically to reaffirm, revise, or withdraw this standard.
20、 Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published August 2005 by American Society of Safety Engineers 1800 East Oakton Street Des Plaines, Illinois 60018-2187 (847) 699-2929 www.asse.
21、org Copyright 2005 by American Society of Safety Engineers All Rights Reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America American National
22、Standard Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 03:35:41 MSTNo reproduction or networking permitted without license from IHS -,-,- Foreword (This Foreword is not a
23、 part of American National Standard A10.39-1996 (R2005).) This standard is one of a series of safety standards that have been formulated by the Accredited Standards Committee on Safety in Construction and Demolition Operations, A10. It is expected that the standards in the A10 series will find a maj
24、or application in industry, serving as a guide to contractors, labor, and equipment manufacturers. For the convenience of users, a list of existing and proposed standards in the A10 series for Safety Requirements in Construction and Demolition Operations follows. A10.1 Planning for Construction Safe
25、ty and Health (under development) A10.2 Safety, Health, and Environmental Training (under development) A10.3 Powder-Actuated Fastening Systems A10.4 Personnel Hoists and Employee Elevators A10.5 Material Hoists (under development) A10.6 Demolition Operations A10.7 Transportation, Storage, Handling,
26、and Use of Commercial Explosives and Blasting Agents A10.8 Scaffolding A10.9 Concrete and Masonry Construction A10.10 Temporary and Portable Space Heating Devices A10.11 Personnel and Debris Nets A10.12 Excavation A10.13 Steel Erection A10.15 Marine Dredging A10.16 Tunnels, Shafts, and Caissons A10.
27、17 Safe Operating Practices for Hot Mix Asphalt (HMA) Construction A10.18 Temporary Floor Holes, Wall Openings, Stairways, and Other Unprotected Edges A10.19 Pile Installation and Extraction Operations (under development) A10.20 Ceramic Tile, Terrazzo, and Marble Work A10.22 Rope-Guided and Non-Guid
28、ed Workers Hoists A10.23 Back Injury Prevention Programs (under development) A10.24 Roofing Safety Requirements for Low Sloped Roofs (under development) A10.25 Sanitation in Construction (under development) A10.26 Emergency Procedures for Construction Sites (under development) A10.27 Hot Mix Asphalt
29、 Facilities A10.28 Work Platforms Suspended from Cranes or Derricks A10.29 Aerial Lifts in Construction (under development) A10.30 Construction Workplace Security A10.31 Digger-Derricks A10.32 Fall Protection Systems for Construction Industry Users A10.33 Safety and Health Program Requirements for M
30、ulti-Employer Projects A10.34 Public Protection A10.35 High Pressure Hydro Blasting (under development) A10.36 Railroad Construction Safety (under development) A10.37 Debris Nets A10.38 Basic Elements of a Program to Provide a Safe and Healthful Work Environment A10.39 Construction Safety and Health
31、 Audit Program A10.40 Ergonomics in Construction (under development) A10.41 Equipment Operator and Supervisor Qualifications and Responsibilities (under development) A10.42 Rigging Qualifications and Responsibilities in the Construction Industry A10.43 Confined Spaces in Construction (under developm
32、ent) A10.44 Lockout/Tagout in Construction (under development) Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 03:35:41 MSTNo reproduction or networking permitted without l
33、icense from IHS -,-,- A10.46 Hearing Loss Prevention (under development) A10.47 Highway Construction Safety (under development) A10.48 Communication Tower Erection (under development) One purpose of these standards is to serve as guides to governmental authorities having jurisdiction over subjects w
34、ithin the scope of the A10 Committee standards. If these standards are adopted for governmental use, the reference of other national codes or standards in individual volumes may be changed to refer to the corresponding regulations. Revisions: The A10 Committee welcomes proposals for revisions to thi
35、s standard. Revisions are made to the standard periodically (usually five years from the date of the standard) to incorporate changes that appear necessary or desirable, as demonstrated by experience gained from the application of the standard. Proposals should be as specific as possible, citing the
36、 relevant paragraph number(s), the proposed wording, and the reason for the proposal. Pertinent documentation would enable the A10 Committee to process the changes in a more timely manner. Interpretations: Upon a request in writing to the Secretariat, the A10 Committee will render an interpretation
37、of any requirement of the standard. The request for interpretation should be clear, citing the relevant paragraph number(s) and phrased as a request for a clarification of a specific requirement. Oral interpretations are not provided. No one but the A10 Committee (through the A10 Secretariat) is aut
38、horized to provide any interpretation of this standard. Approval: Neither the A10 Committee nor American National Standards Institute (ANSI) “approves,“ “certifies,“ “rates,“ or “endorses“ any item, construction, proprietary device, or activity. Appendixes: Appendixes are included in most standards
39、to provide the user with additional information related to the subject of the standard. Appendices are not part of the approved standard. Committee Meetings: The A10 Committee meets twice a year. Persons wishing to attend a meeting should contact the Secretariat for information. Standard Approval: T
40、his standard was processed and approved for submittal to ANSI by the American National Standards Committee on Safety in Construction and Demolition Operations, A10. Approval of the standard does not necessarily imply (nor is it required) that all Committee members voted for its approval. At the time
41、 this standard was published, the A10 Committee had the following members: Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 03:35:41 MSTNo reproduction or networking permitt
42、ed without license from IHS -,-,- Richard King, CSP, Chairman James Tomaseski, Vice Chairman Timothy R. Fisher, Secretary CSP, ARM, CPEA Jennie Dalesandro, Administrative Technical Support Organization Represented Name of Representative Accident Prevention Corp. Frank Burg Michael Serpe Aegis Corpor
43、ation Matthew J. Burkart, P.E. Judith Burkhart Allegheny Power System David Szuch Richard P. Sanner Alstom Power Robert Renney Ted P. Sharp American Federation of Labor and Congress of Industrial Organizations Jim E. Lapping, MS, P.E., CSP American Insurance Services Group Edward Campbell James G. B
44、orchardt, CSP, CPE ASCE - Construction Institute Committee Edward R. Ardery, P.E. American Society of Safety Engineers Allen Macenski, CSP, J.D. A. David Brayton, CSP, CPC American Subcontractors Association Dave Madaras Luke McFadden Asbestos Workers International Union Terry Lynch Jim E. Lapping,
45、MS, P.E., CSP Associated Builders and Contractors Michael W. Hayslip, P.E., CSP Joe Visgaitis Associated General Contractors of America, The James Brown Ron Prichard, Ph.D., P.E. Barton-Malow Company John Gleichman, CSP Black Job Safety Analysis, etc. 4.2.3.8 Permits, i.e., confined space, hot work,
46、 trenching, etc. 4.2.3.9 Exposure and Medical Records 4.2.3.10 Toolbox Talk Minutes 4.2.3.11 Safety Meeting Minutes 4.2.3.12 Special Plans/Procedures 4.2.3.13 Enforcement Procedure(s) 4.2.3.14 Prior Audit Result Documentation 4.2.3.15 Resolution of Audit Results 4.3 Performance. 4.3.1 Does the Const
47、ruction Employer develop and implement supervisory activities, such as those offered in A10.33 and A10.38, including: 4.3.1.1 Periodic project safety and health inspections that are recorded and maintained? 4.3.1.2 Follow-up inspections and abatement actions and results that are recorded and maintai
48、ned? 4.3.1.3 Specific safety and health activities conducted prior to the start of work or conducting a specific task as required by procedure, regulatory requirements or Copyright American Society of Safety Engineers Provided by IHS under license with ASSE/SAFE Licensee=IHS Employees/1111111001, User=listmgr, listmgr Not for Resale, 03/05/2007 03:35:41 MSTNo reproduction or networking permitted without license from IHS -,-,- AMERICAN NATIONAL STANDARD A10.39-1996 (R2005) 12 program requirements. Is this activity sufficiently