《BS-7016-4-1988 ISO-7967-4-1988.pdf》由会员分享，可在线阅读，更多相关《BS-7016-4-1988 ISO-7967-4-1988.pdf（20页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS 7016-4: 1988 ISO 7967-4: 1988 Components and systems of reciprocating internal combustion engines Part 4: Glossary of terms for pressure charging and air/exhaust gas ducting systems ISO title: Reciprocating internal combustion engines Vocabulary of components and systems Part 4:
2、Pressure charging and air/exhaust gas ducting systems UDC 62 833 + 62 24:(038) Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 This British Standard, having been prepared under the direction of t
3、he Machinery and Components Standards Committee, was published under the authority of the Board of BSI and comes into effect on 30 December 1988 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference MCE/14 Draft for comment 86/78268 DC ISBN 0 580 16865 4 C
4、ommittees responsible for this British Standard The preparation of this British Standard was entrusted by the Machinery and Components Standards Committee (MCE/-) to Technical Committee MCE/14, upon which the following bodies were represented: Association of Consulting Engineers British Railways Boa
5、rd Ministry of Defence Society of Motor Manufacturers and Traders Ltd. The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Association of British Generating Set Manufacturers BEAMA Ltd. Marine Engine and Equipment Manufacturers Association Am
6、endments issued since publication Amd. No.Date of issueComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-1999i Contents Page Committees responsibleInside front cover National forewo
7、rdii 0Introduction1 1Scope and field of application2 2Reference2 3Arrangement of terms and definitions2 4Pressure charging and scavenging units3 5Air inlet and exhaust pipes and manifolds8 6Air filtration system9 7Silencers9 8Charge air cooler10 9Exhaust gas cleaners10 Indexes English11 French13 Rus
8、sian14 Publication referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 ii BSI 10-1999 National foreword This Part of BS 7016 has been prepared under the direction of the
9、Machinery and Components Standards Committee and is identical with ISO 7967-4:1988 “Reciprocating internal combustion engines Vocabulary of components and systems Part 4: Pressure charging and air/exhaust gas ducting systems” published by the International Organization for Standardization (ISO). ISO
10、 7967 consists of nine Parts which are listed in clause 0. Parts 1 to 9 of ISO 7967 will be implemented as Parts 1 to 9 of BS 7016. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminol
11、ogy and certain conventions are not identical with those used in British Standards; attention is drawn especially to the following. Wherever the words “part of ISO 7967” appear, referring to this standard, they should be read as “Part of BS 7016”. A British Standard does not purport to include all t
12、he necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International StandardCorresponding British Standard ISO 2710:1978BS 5676:197
13、9 Vocabulary for reciprocating internal combustion engines (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 14, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments
14、incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-19991 Licensed Copy: London South Bank University, Lo
15、ndon South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 2 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-19993 Licensed Copy:
16、 London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 4 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4
17、:1988 BSI 10-19995 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 6 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Unc
18、ontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-19997 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 8 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri De
19、c 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-19999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 10 BSI 10-1999 Licensed Copy: London South Bank University, Lo
20、ndon South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-199911 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 12 BSI 10-1999 Licensed Cop
21、y: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-199913 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016
22、-4:1988 14 BSI 10-1999 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4:1988 BSI 10-1999 Publication referred to See national foreword. Licensed Copy: London South Bank University, London South Bank Un
23、iversity, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7016-4: 1988 ISO 7967-4: 1988 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards
24、in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of ou
25、r products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI of
26、fers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020
27、8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and internationa
28、l standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept
29、 up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the co
30、pyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or othe
31、rwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior writt
32、en permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 10:17:34 GMT+00:00 2006, Uncontrolled Copy, (c) BSI