《BS-7590A-1992.pdf》由会员分享，可在线阅读，更多相关《BS-7590A-1992.pdf（8页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS 7590A:1992 (extracted from BS 7590:1992) Worksheet for the determination of volume fraction by systematic manual point count IMPORTANT NOTE. It is essential that this worksheet is used in conjunction with clauses 3 to 10 of BS 7590:1992. Licensed Copy: London South Bank Universit
2、y, London South Bank University, Fri Dec 08 11:42:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7590A:1992 BSI 10-1999 ISBN 0 580 21324 2 A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct applica
3、tion. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 3 and a back cover. This standard has been updated (see copyright date) and may have had amend
4、ments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:42:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7590A:199
5、2 BSI 10-1999i Contents Page A.1Worksheet1 A.2Symbols2 A.3Procedure for systematic manual point count2 Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:42:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: London South Bank University, Londo
6、n South Bank University, Fri Dec 08 11:42:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7590A:1992 BSI 10-19991 A.1 Worksheet Field no. i PiField no. i PiField no. i Pi 11121 21222 31323 41424 51525 61626 71727 81828 91929 102030 NOTESee A.2 for symbols and A.3 for procedure. Fraction percentage
7、Standard deviation s 95 % CI = Volume fraction Vv = Relative error = Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:42:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7590A:1992 2 BSI 10-1999 A.2 Symbols A.3 Procedure for systematic manual point count A.3.1
8、 Visually estimate the area fraction of the constituent or feature of interest on the metallographic section. A.3.3 If applicable, use Table 1 to select the grid size PT for optimum efficiency of counting. A.3.3 Superimpose the grid upon the microscope viewing screen or in the microscope eyepiece an
9、d select magnification such that the size of the features of interest are approximately one-half of the spacing between grid points. A.3.4 Select the relative error, e.g. 10 %, 20 %, or 33 %, desired for the measurement. The relative error is defined as follows: A.3.5 Using Tables 2 to 5, obtain an
10、estimate of the number of fields, n, required to obtain the desired degree of precision. A.3.6 Determine the spacing between fields which will form a systematic (equally spaced) array covering a majority of the sample area without overlap. For example, on a 10 mm 15 mm sample area where 40 fields ar
11、e indicated from Tables 2 to 5, a 5 8 array of fields at 1.5 mm intervals might be used. A.3.7 Determine the number of turns required on the stage translation controls to move the stage from one field position to the next. Do not observe the image while translating to a new field to avoid bias in po
12、sitioning the grid. A.3.8 Count and record the number of grid points Pi, falling within the feature of interest for each field. A.3.9 Count any point falling on the constituent boundary as one-half. A.3.10 Calculate the percentage of points Pp(i) within the feature of interest for each field A.3.11
13、Calculate the mean of Pp(i) A.3.12 Calculate the standard deviation estimate, s. PTTotal number of points in the grid PiPoint count on the ith field Pp(i)Percentage of the grid points on the ith field Mean of Pp(i) nNumber of fields examined sEstimate of standard deviation () CI95 % confidence inter
14、val VvVolume fraction as percentage Relative error = (7) (2) (3) (4) Pp Pp Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:42:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7590A:1992 BSI 10-19993 A.3.13 Calculate CI, the 95 % confidence interval for. Where
15、 n 30 use the multiplier given in Table 6 in the equation for CI instead of the value 2. (5) Pp Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:42:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 7590A:1992 BSI 389 Chiswick High Road London W4 4AL BSI British
16、 Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of Brit
17、ish Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the
18、 technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standard
19、s Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British S
20、tandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details
21、 on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact
22、Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no
23、extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as
24、 symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: London South Bank University, London South Bank University, Fri Dec 08 11:42:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI