《BS-A-306-1994 ISO-8280-1993.pdf》由会员分享，可在线阅读，更多相关《BS-A-306-1994 ISO-8280-1993.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS A 306:1994 ISO 8280:1993 Rivets, solid, universal head, metallic material, with or without surface treatment Dimensions UDC 621.884:629.7 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A
2、 306:1994 This British Standard, having been prepared under the direction of the Aerospace Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 August 1994 BSI 01-2000 The following BSI references relate to the work on this standard: Commit
3、tee reference ACE/12 Draft for comment 91/82708 DC ISBN 0 580 23220 4 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Aerospace Standards Policy Committee (ACE/-) to Technical Committee ACE/12, upon which the following bodies were repres
4、ented: The Association of Electronics, Telecommunications and Business Equipment Industries British Industrial Fastners Federation Ministry of Defence Society of British Aerospace Companies Ltd. Amendments issued since publication Amd. No.DateComments Licensed Copy: London South Bank University, Lon
5、don South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 BSI 01-2000i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative reference1 3Configuration and dimensions1 Figure 11 Table 1 Dimensions (except length L1)
6、2 Table 2 Lengths L1 for rivets in aluminium and aluminium alloys3 Table 3 Lengths L1 for rivets in nickel alloys, corrosion-resistant steels, commercially pure titanium and titanium alloys4 List of referencesInside back cover Licensed Copy: London South Bank University, London South Bank University
7、, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 ii BSI 01-2000 National foreword This British Standard has been prepared under the direction of the Aerospace Standards Policy Committee. It is identical with ISO 8280:1993 Aerospace Rivets, solid, universal head, metalli
8、c material, with or without surface treatment Dimensions published by the International Organization for Standardization (ISO). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Complia
9、nce with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International StandardCorresponding British Standard ISO 286-2:1988BS EN 20286 ISO system of limits and fits Part 2:1992 Tables of standard tolerance grades and limit deviations for holes and shaft
10、s (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment tabl
11、e on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 BSI 01-20001 1 Scope This International Standard specifies the dimensions of universal head solid rivets, in metallic m
12、aterial, with or without surface treatment. It is intended for the drawing up of aerospace product standards. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the
13、edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently
14、 valid International Standards. ISO 286-2:1988, ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts. 3 Configuration and dimensions See Figure 1 and Table 1 to Table 3. Dimensions and tolerances are expressed in millimetres. They are ap
15、plicable after any surface treatment. 1) The Length range is limited (see Table 2 and Table 3). 2) Drill start option, only for corrosion-resistant steel, nickel alloys, commercially pure titanium, titanium alloys. Figure 1 Licensed Copy: London South Bank University, London South Bank University, S
16、at Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 2 BSI 01-2000 Table 1 Dimensions (except length L1) Diameter code D1aD2D3D4HL2L3R1R2 d11bmax.min.max.min.max.min.max.min.max.min. 0,08 0161,63,363,041,61,20,90,7 1,4 2 0,15 02024,23,82,01,51,10,92,4 0252,55,254,752,51,82,01,
17、71,31,10,80,53 03036,35,73,02,22,42,11,51,30,90,63,7 0353,57,356,653,52,62,82,451,81,6 1,6 1,050,704,3 0,25 04048,47,6433,22,82,01,81,20,84,9 050510,59,55,03,74,03,52,42,2 2 1,51,06,1 060612,611,46,04,54,84,22,82,61,81,27,3 080816,815,2866,45,63,73,52,41,69,8 10010211910,07,5874,54,33212,2 a Over le
18、ngth L 2, D1 max. may increase by 0,03. b See ISO 286-2. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 BSI 01-20003 Table 2 Lengths L1 for rivets in aluminium and aluminium alloys LengthDiameter
19、 code CodeL1 +0,5 0 016020025030035040050060080100 Shape of tail enda AAABABABABABABABAB 0033+ 0044+ 0055+ 0066+ 0077+ 0088+ 0099+ 01010+ 01111+ 01212+ 01313+ 01414+ 01515+ 01616+ 01717+ 01818+ 01919+ 02020+ 02222+ 02424+ 02626+ 02828+ 03030+ 03232+ 03535+ 04040+ 04545+ 05050+ 05555+ 06060+ a Form A
20、: non-radiused tail end (see Figure 1) Form B: radiused tail end (see Figure 1) Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 4 BSI 01-2000 Table 3 Lengths L1 for rivets in nickel alloys, corros
21、ion-resistant steels, commercially pure titanium and titanium alloys LengthsDiameter code CodeL1 +0,5 0 016020025030035040050060 Shape of tail enda AAABABABABABAB 0033+ 0044+ 0055+ 0066+ 0077+ 0088+ 0099+ 01010+ 01111+ 01212+ 01313+ 01414+ 01515+ 01616+ 01717+ 01818+ 01919+ 02020+ 02222+ 02424+ 0262
22、6+ 02828+ 03030+ 03232+ 03535+ 04040+ a Form A: non-radiused tail end (see Figure 1) Form B: radiused tail end (see Figure 1) Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 BSI 01-2000 List of re
23、ferences See national foreword. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS A 306:1994 ISO 8280:1993 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent nati
24、onal body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess t
25、he latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of
26、which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign st
27、andards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information
28、on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Inf
29、ormation Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax
30、: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval s
31、ystem or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If
32、 these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 03:32:52 GMT+00:00 2006, Uncontrolled Copy, (c) BSI