《BS-EN-12958-2000.pdf》由会员分享，可在线阅读，更多相关《BS-EN-12958-2000.pdf（8页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12958:2000 Incorporating Amendment No. 1 Footwear Test methods for shanks Fatigue resistance The European Standard EN 12958:2000, with the incorporation of amendment A1:2004, has the status of a British Standard ICS 61.060 ? Licensed Copy: sheffieldun sheffieldun, na, Sat Oct
2、28 08:42:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12958:2000 This British Standard, having been prepared under the direction of the Sector Committee for Materials and Chemicals, was published under the authority of the Standards Committee and comes into effect on 15 May 2000 BSI 6 July 20
3、04 ISBN 0 580 34280 8 National foreword This British Standard is the official English language version of EN 12958:2000, including amendment A1:2004. The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear and leather, which has the responsibility to: A list of
4、organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence
5、 Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself
6、 confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and pro
7、mulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No.DateCo
8、mments 150486 July 2004Replacement of text in Clause 1 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:42:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12958 February 2000 + A1 May 2004 ICS 61.060 English version Footwear Test methods fo
9、r shanks Fatigue resistance (includes amendment A1:2004) Chaussures Mthodes dessai pour cambrions Rsistance la fatigue (inclut lamendement A1:2004) Schube Prfverfahren fr Gelenke Ermdungswiderstand (enthlt nderung A1:2004) This European Standard was approved by CEN on 1 January 2000; Amendment A1 wa
10、s approved by CEN on 2 March 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nati
11、onal standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and no
12、tified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe
13、rlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 2000 CEN All rights of exploitation i
14、n any form and by any means reserved worldwide for CEN national Members Ref. No. EN 12958:2000 + A1:2004 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:42:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12958:2000 BSI 6 July 20042 Foreword This European Standard has been prepared by Te
15、chnical Committee CEN/TC 309, Footwear, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2000, and conflicting national standards shall be withdraw
16、n at the latest by August 2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxe
17、mbourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document (EN 12958:2000/A1:2004) has been prepared by Technical Committee CEN/TC 309, Footwear, the Secretariat of which is held by AENOR. This amendment to the European Standard E
18、N 12958:2000/A1:2004 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2004, and conflicting national standards shall be withdrawn at the latest by November 2004. According to the CEN/CENELEC Internal Regulations
19、, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
20、Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3 3Definitions3 4Apparatus and materials3 5Sampling and conditioning3 6Test method4 7Expression of results4 8Test report4 Licensed Copy: sheffieldun sheffield
21、un, na, Sat Oct 28 08:42:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12958:2000 BSI 6 July 2004 3 1 Scope This European Standard specifies a test method for assessing the fatigue resistance of steel shanks of at least 100 mm in length used for the reinforcement of the waist region of womens sho
22、es and of some mens and childrens shoes. NOTESteel shanks below 100 mm in length cannot be reliably tested by this method. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropr
23、iate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. for undated references the latest edition of the publicat
24、ion referred to applies. EN 12222, Footwear Standard atmospheres for conditioning and testing of footwear and components for footwear. 3 Definitions For the purposes of this standard the following definition applies. 3.1 fatigue resistance the resistance of a shank, under specified conditions, to re
25、peated loading cycles 4 Apparatus and materials A test machine shall be used to measure the fatigue resistance of steel shanks. For multi station machines each station shall include the items described in a) to d). a) A fixed lower jaw with flat hardened steel face plates of height 32 mm 2 mm and of
26、 width suitable to securely clamp the shank. b) An adjustable upper jaw with flat hardened steel face plates with a means of exerting a force of 49 N 2 N on the shank perpendicular to the plane of the lower clamp faces at a rate of four cycles per second. One complete cycle being the application of
27、the load in a forward and reverse direction as in a simple harmonic motion. An illustration of suitable upper and lower jaw configuration is given in Figure 1. c) A method of counting the number of complete cycles up to break of the specimen. d) A method of controlling the clamping force of the jaws
28、 see items a) and b), to 4 900 Nmm 50 Nmm. NOTEA torque wrench is suitable. 5 Sampling and conditioning The test specimen shall be a complete shank. At least four samples of each type of shank shall be tested. Condition samples for 48 h prior to testing in a controlled atmosphere in accordance with
29、EN 12222. Tests shall be carried out in a suitable conditioned atmosphere in accordance with EN 12222, or, where this is not possible tests shall be carried out within 15 minutes of removing the test specimen from the conditioned atmosphere. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:
30、42:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12958:2000 4 BSI 6 July 2004 6 Test method The shank is clamped at its rear end as it would be in a shoe and bent as a cantilever beam by an alternating force applied to the shank. The number of loading cycles required to break the shank is termed
31、the fatigue life. Insert the heel end of the shank centrally in the lower jaw see 4a) so that 32 mm of shank are clamped with the end of the shank level with the bottom edge of the jaw and the specimen is perpendicular to the clamping forces of the lower jaw. Close and tighten the lower jaw see 4a)
32、ensuring that the torque exerted at the upper edge of the jaw is 4 900 Nmm by using a device according to 4d). Such a high torque does not need to be applied to the lower edge of the clamp, but apply sufficient to ensure that the lower edge is secure and that the faces of the jaws remain parallel. P
33、lace the upper jaw see 4b) on the specimen so that the distance between the top edge of the lower clamp see 4a) and the centre of the upper jaw see 4b) is 70 mm 2 mm. Uniformly close and tighten the upper jaw see 4b) ensuring that the total torque exerted is 4 900 Nmm see 4d). 7 Expression of result
34、s Operate the testing machine and record the total number of load cycles as each specimen breaks. For each specimen report the total number of load cycles to break and calculate the arithmetic mean of the four results. 8 Test report The test report shall include the following information: a) results
35、, expressed in accordance with Clause 7; b) reference to this test method; c) full description of the samples tested including commercial styles codes, colours, nature, etc.; d) the number of test specimens if other than four; e) any deviations from this standard method; f) date of testing. Licensed
36、 Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:42:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12958:2000 BSI 6 July 2004 5 Figure 1 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:42:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12958:2000 BSI 389 Chiswick High Road London W4
37、 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revisio
38、n. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the
39、Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions o
40、f standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orde
41、rs for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Librar
42、y and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept
43、up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to Br
44、itish Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standar
45、dization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not precl
46、ude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 08:42:18 GMT+00:00 2006, Uncontrolled Copy, (c) BSI