《BS-AU-201-2-1985 ISO-7880-1984.pdf》由会员分享，可在线阅读，更多相关《BS-AU-201-2-1985 ISO-7880-1984.pdf（8页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 201-2: 1985 ISO 7880: 1984 Relays and flashers Part 2: Specification for arrangement and functional attribution of relay terminals for road vehicles ISO title: Road vehicles Relays Arrangement and functional attribution of relay terminals UDC 629.113.066:621.
2、318.5 Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 01:57:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 201-2:1985 This British Standard, having been prepared under the direction of the Automobile Standards Committee, was published under the authority of
3、 the Board of BSI and comes into effect on 30 April 1985 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference AUE/16 Draft for comment 82/78656 DC ISBN 0 580 14405 4 Committees responsible for this British Standard The preparation of this British Standard
4、 was entrusted by the Automobile Standards Committee (AUE/-) to Technical Committee AUE/16, upon which the following bodies were represented: Association of Trailer Manufacturers Department of Transport (Highways) Electric Cable Makers Confederation National Caravan Council Limited Society of Motor
5、Manufacturers and Traders Limited Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 01:57:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 201-2:1985 BSI 02-2000i Contents Page Committees respons
6、ibleInside front cover National forewordii 1Scope and field of application1 2Reference1 3Specifications1 Publication referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 01:57:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 201-2:1985
7、 ii BSI 02-2000 National foreword This Part of BS AU 201 has been prepared under the direction of the Automobile Standards Committee and is identical with ISO 7880:1984 “Road vehicles Relays Arrangement and functional attribution of relay terminals”, published by the International Organization for S
8、tandardization (ISO). Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attention is drawn especia
9、lly to the following. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct app
10、lication. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International StandardCorresponding British Standard ISO 7588:1983BS AU 201 Relays and flashers Part 1:1985 Specification for mounting and positioning dimensions of male tabs and s
11、ocket apertures for relays and flashers for road vehicles (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments i
12、ncorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 01:57:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 201-2:1985 BSI 02-20001 1 Scope and field of application This Internat
13、ional Standard specifies the arrangement and functional attribution of relay terminals intended for road vehicles. 2 Reference ISO 7588, Road vehicles Relays and flashers Mounting and positioning dimensions of male tabs and socket apertures for relays and flashers. 3 Specifications Terminal position
14、s are shown from the relay terminal connection side. Type Arrangement of the terminals according to ISO 7588 Wiring diagram (basic types) Attribution of terminal functions 1 Break contact 1 = coil 2 = coil 3 = switching contact input 4 = switching contact output (break contact) 2 Make contact 1 = co
15、il 2 = coil 3 = switching contact input 5 = switching contact output (make contact) 3 Changeover contact 1 = coil 2 = coil 3 = switching contact input 4 and 5 = switching contact output (4 = break contact, 5 = make contact) NOTEOther terminal designations may be used if the arrangements and attribut
16、ion of functions of the terminals comply with the specifications. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 01:57:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI 2 blank Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 01
17、:57:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 201-2:1985 BSI 02-2000 Publication referred to See national foreword. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 01:57:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS AU 201-2: 1985 ISO 7880: 1984 BSI
18、 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards ar
19、e updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this B
20、ritish Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive
21、the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementati
22、on of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic informati
23、on services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards.
24、 For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted unde
25、r the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implem
26、enting the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070. Licensed Copy: London South Bank University, London South Bank University, Sat Dec 09 01:57:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI