《BS-EN-1158-1997.pdf》由会员分享，可在线阅读，更多相关《BS-EN-1158-1997.pdf（30页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 1158:1997 Incorporating Amendment No. 1 and Corrigenda Nos. 1 Building hardware Door coordinator devices Requirements and test methods The European Standard EN 1158:1997, with the incorporation of amendment A1:2002, has the status of a British Standard ICS 91.190 ? and 2 Licen
2、sed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 1158:1997 This British Standard, having been prepared under the direction of the Sector Board for Building and Civil Engineering, was published under the authority of the Standards Board and c
3、omes into effect on 15 August 1997 BSI August 2006 The following BSI references relate to the work on this standard: Committee reference B/538 Draft for comment 93/108726 DC ISBN 0 580 27919 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to
4、Technical Committee B/538, Waste management, upon which the following bodies were represented: Association of Builders Hardware Manufacturers British Plastics Federation British Woodworking Federation Chartered Institute of Building Council for Aluminium in Building Department of the Environment (Bu
5、ilding Research Establishment) Door and Shutter Manufacturers Association Flat Glass Manufacturers Association Glass and Glazing Federation Guild of Architectural Ironmongers Institute of Architectural Ironmongers National House-building Council Royal Institute of British Architects Steel Window Ass
6、ociation The following bodies were also represented in the drafting of the standard, through subcommittees and panels: Association of Building Component Manufacturers Association of Building Engineers British Security Industry Association Consumer Policy Committee of BSI LHC Building Components and
7、Services Loss Prevention Council Amendments issued since publication Amd. No.DateComments 1407620 February 2003See revised national foreword 14398 Corr. No. 1 13 March 2003National foreword corrected 16310 August 2006 Changes made to Clause ZA.3. Corrigendum No. 2 Licensed Copy: sheffieldun sheffiel
8、dun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 1158:1997 BSI 13 March 2003 i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 11583 Bibliography25 Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2
9、006, Uncontrolled Copy, (c) BSI BS EN 1158:1997 ii BSI 13 March 2003 National foreword This British Standard is the official English language version of EN 1158:1997, including amendment A1:2002 and Corrigendum February 2006, published by the European Committee for Standardization (CEN). The start a
10、nd finish of text introduced or altered by CEN amendment A1 is indicated in the text by tags ?. EN 1158:1997 (as amended) is a candidate “harmonized” European Standard and fully takes into account the requirements of the European Commission mandate M/101, Doors, windows, shutters, gates and related
11、hardware, given under the EU Construction Products Directive (89/106/EEC), and intended to lead to CE marking. The date of applicability of EN 1158:1997 (as amended) as a “harmonized” European Standard, i.e. the date after which this standard may be used for CE marking purposes, is subject to an ann
12、ouncement in the Official Journal of the European Communities. The Commission in consultation with Member States have agreed a transition period for the co-existence of “harmonized” European Standards and their corresponding national standard(s). It is intended that this period will comprise a perio
13、d, usually nine months, after the date of availability of the European Standard, during which any required changes to national regulations are to be made, followed by a further period, usually twelve months, for the implementation of CE marking. At the end of this co-existence period, the national s
14、tandard(s) will be withdrawn. Since BS EN 1158:1997 is the current national standard the changes introduced by amendment no. 1 may be implemented from nine months after publication. Based on this normal transition period of twenty-one months, BS EN 1158:1997 (as amended) would be fully effective in
15、September 2004. NOTEThis date is approximate. Users of this standard should contact BSI Customer Services for confirmation of withdrawal. The UK participation in its preparation was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to its Subcommittee B/
16、538/4, Building hardware, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European develo
17、pments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its Secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under
18、the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applic
19、ation. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 25 and a back cover. The BSI copyright notice displayed in this document i
20、ndicates when the document was last issued. Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1158 February 1997 + A1 December 2002 ICS 91.190.00 Descriptors: Hardware, buildings, doors, hin
21、ged doors, fire doors, door leaves, door closing devices, selection, definitions, classifications, specifications, performance evaluation, installation, tests, fatigue tests, performance tests, corosion resistance, marking English version Building hardware Door coordinator devices Requirements and t
22、est methods (includes amendment A1:2002) Quincaillerie pour le btiment Dispositifs de slection de vantaux Prescriptions et mthodes dessai (inclut lamendement A1:2002) Schlsser und Baubeschlge Schliefolgeregler Anforderungen und Prfverfahren (enthlt nderung A1:2002) This European Standard was approve
23、d by CEN on 1997-01-17 and amendment A1 was approved by CEN on 2002-11-07. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog
24、raphical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a
25、 CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sp
26、ain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1997 Copyright reserved to CEN members Ref. No. EN 1158:1997 + A1:2002 E Incorporating Corrig
27、endum February 2006 Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1158:1997 BSI 13 March 2003 2 Foreword This European Standard has been prepared by Technical Committee CEN/TC 33, Doors, windows, shutters, building hardware and curtain
28、walling, the Secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 1997, and conflicting national standards shall be withdrawn at the latest by August 1997.
29、 This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC, see informative Annex ZA which is an integral part
30、 of this document. Whenever reference is made to classes, they are considered to be technical classes and not classes according to Article 3(2) of the Construction Products Directive (89/106/EEC). This European Standard is part of a series of European Standards dedicated to building hardware product
31、s. Normative and informative annexes are indicated in the contents list. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Icel
32、and, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This document EN 1158:1997/A1:2002 has been prepared by Technical Committee CEN/TC 33, Doors, windows, shutters, building hardware and curtain walling, the Secr
33、etariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2003, and conflicting national standards shall be withdrawn at the latest by September 2004. This document h
34、as been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this document. According to the CEN/C
35、ENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, S
36、weden, Switzerland and the United Kingdom. Contents Page Foreword2 1Scope3 2Normative references3 3Definitions3 4Classification4 5Requirements6 6Test apparatus7 7Test methods8 8Marking11 9Evaluation of conformity12 Annex A (normative) Additional requirements for door coordinator devices intended for
37、 use on fire/smoke door assemblies13 Annex B (informative) Illustrations of door coordinator devices and meeting stile details13 Annex C (normative) Flow chart of test procedure16 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Direc
38、tive (89/106/EEC)17 Bibliography25 Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1158:1997 BSI 13 March 2003 3 1 Scope ?This European Standard specifies requirements for the following door coordinator devices for use on double leaf swin
39、g doors: separately mounted door coordinator devices; coordinator mechanisms incorporated in door closers; coordinator mechanisms incorporated in door closers with electrically powered hold-open devices.? Door coordinator devices are used where it is necessary to ensure the correct sequence of closi
40、ng of double leaf swing doors, for example doors with rebated meeting stiles. Door coordinator devices manufactured in accordance with this European Standard are recommended for use wherever there is a requirement for reliable sequential closing of double leaf swing fire/smoke doors incorporating re
41、bated meeting stiles. Door coordinator devices for use on fire/smoke doors need additional attributes in order to contribute actively to meeting the essential requirements of safety in case of fire, either independently or as part of a complete door assembly. These additional requirements for door c
42、oordinator devices for use on a fire/smoke door assembly are specified in normative Annex A. ?Door closing devices are covered by EN 1154. Electrically powered hold-open devices are covered by EN 1155.? 2 Normative references This European Standard incorporates by dated or undated reference, provisi
43、ons from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by
44、amendment or revision. For undated references the latest edition of the publication referred to applies. EN 1154, Building hardware Controlled door closing devices Requirements and test methods. ?EN 1155?, Building hardware Electrically powered hold-open devices for swing doors Requirements and test
45、 methods. ?EN 1670?, Building hardware Corrosion resistance for hardware for doors, windows, shutters and curtain walling Requirements and test methods. ?EN 1634-1, Fire resistance tests for door and shutter assemblies Part 1: Fire doors and shutters. EN 1634-3, Fire resistance tests for door and sh
46、utter assemblies Part 3: Smoke control doors and shutters.? 3 Definitions ?For the purposes of this European Standard, the terms and definitions listed in EN 1154 apply together with the following:? 3.1 door coordinator devices 3.1.1 gravity arm coordinator ?see Figure B.1.1? 3.1.2 swing arm coordin
47、ator ?see Figure B.1.2? 3.1.3 double arm swing coordinator ?see Figure B.1.3? Licensed Copy: sheffieldun sheffieldun, na, Thu Oct 26 12:04:45 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 1158:1997 4 BSI 13 March 2003 3.1.4 coordinator incorporated in a door closing device ?see Figure B.1.4a and Fig
48、ure B.1.4b? ?Text deleted? ?3.2 rebated meeting stiles see Figure B.2.1? ?3.3? active leaf the first opening and last closing leaf of a rebated single swing double door set ?3.4? inactive leaf the last opening and first closing leaf of a rebated double leaf swing door ?3.5? waiting position the angu
49、lar position at which the active leaf is held to allow the inactive leaf to close first ?3.6? carry bar a component that ensures, in the case of the inactive leaf being operated first, that the active leaf is moved beyond the waiting position ?3.7? automatic swing door operator a closing device for swing doors that incorporates a powered opening mechanism ?3.8? automatic mode the operation of two automatic swing door operators in which