《BS-EN-12259-3-2000.pdf》由会员分享，可在线阅读，更多相关《BS-EN-12259-3-2000.pdf（58页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12259-3:2000 Incorporating Amendments Nos. 1 and 2 and Corrigendum No. 1 Fixed firefighting systems Components for sprinkler and water spray systems Part 3: Dry alarm valve assemblies The European Standard EN 12259-3:2000, with the incorporation of Amendments A1:2001 and A2:20
2、05, has the status of a British Standard ICS 13.220.20 ? Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 12259-3:2000 This British Standard, having been prepared under the direction of the Health and Environment Sector Policy and Strat
3、egy Committee, was published under the authority of the Standards Policy and Strategy Committee on 15 August 2000 BSI 2006 ISBN 0 580 34113 5 National foreword This British Standard is the official English language version of EN 12259-3:2000, including amendments A1:2001 and A2:2005. This European S
4、tandard is the subject to transitional arrangements agreed under a Commission mandate which is intended to lead to CE marking in support of the Construction Products Directive. In order to allow for any changes in national regulations, the Member States have agreed a transition period. The UK partic
5、ipation in its preparation was entrusted by Technical Committee FSH/18, Fixed firefighting systems, to Subcommittee FSH/18/2, Sprinklers, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The Britis
6、h Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Onlin
7、e. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsibl
8、e international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the E
9、N title page, pages 2 to 54, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Sidelining in this document indicates the most recent changes by amendment. Amendments issued since publication Amd. No. DateComments 120
10、2321 December 2001 13882 Corrigendum No. 1 24 October 2002Revision of national foreword 1635830 June 2006Indicated by a sideline Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12259-3 May
11、 2000 + A1 + A2 February 2001 November 2005 ICS 13.220.20; 13.320 English version Fixed firefighting systems Components for sprinkler and water spray systems Part 3: Dry alarm valve assemblies (includes amendments A1:2001 and A2:2005) Sytmes fixes de lutte contre lincendie Composants des systmes spr
12、inkleurs et pulvrisation deau Partie 3: Postes dalarme sous air (inclut les amendements A1:2001 et A2:2005) Ortsfeste Lschanlagen Bauteile fr Sprinkler- und Sprhwasseranlagen Teil 3: Trockenalarmventile und Zubehr (enthlt nderungen A1:2001 und A2:2005) This European Standard was approved by CEN on 1
13、7 December 1999. Amendment A1:2001 was approved by CEN on 20 January 2001 and amendment A2:2005 was approved by CEN on 19 October 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
14、standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any oth
15、er language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, F
16、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMU
17、NG Central Secretariat: rue de Stassart, 36 B-1050 Brussels 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12259-3:2000 +A1:2001 +A2:2005 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncon
18、trolled Copy, (c) BSI Page 2 EN 12259-3:2000 BSI 2006 Contents Page Foreword 3 1 Scope 7 2 Normative references 7 3 Definitions 8 4 Dry alarm valve assembly construction and performance 11 5 Quick opening device construction and performance 19 6 Marking 22 7 Instructions for installation and operati
19、on 24 8 Conditions for testing 25 9 Evaluation of conformity 25 Annex A (normative) Fire exposure test for body and cover 26 Annex B (normative) Strength test for body and cover 29 Annex C (normative) Flow tests for dry alarm valves 30 Annex D (normative) Sealing assembly tests 33 Annex E (normative
20、) Performance tests 37 Annex F (normative) Resistance to ageing test for non-metallic components (excluding gaskets and seals) 41 Annex G (normative) Leakage resistance test 43 Annex H (normative) Test for sealing assembly elements resistance to adhesion 44 Annex I (normative) Endurance test 45 Anne
21、x J (normative) Installation pressure leak resistance test 46 Annex K (normative) Strength and leak resistance test 47 Annex L (informative) Typical testing schedule and example of test specimen numbers for dry alarm valve 48 Annex M (normative) Salt mist corrosion test 49 Annex ZA (informative) Cla
22、uses of this European Standard addressing the provisions of the EU Construction Products Directive 50 Bibliography 54 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 3 EN 12259-3:2000 BSI 2006 Foreword This European Standard has been pr
23、epared by Technical Committee CEN/TC 191, Fixed fire fighting systems, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2000, and conflicting natio
24、nal standards shall be withdrawn at the latest by November 2000. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). It forms one part of EN 12259, covering c
25、omponents for automatic sprinkler systems, and is included in a series of European Standards planned to cover: a) automatic sprinkler systems (EN 12845 b) gas systems (EN 12094 c) powder systems (EN 124161); d) explosion protection systems (EN 26 184); e) foam systems (EN 135651); f) hydrant and hos
26、e reel systems (EN 671); g) smoke and heat control systems (EN 121011); h) water spray systems (EN 1). EN 12259 has the general title, Fixed fire fighting systems Components for sprinkler and water spray systems, and will consist of the following parts: Part 1: Sprinklers; Part 2: Wet alarm valve as
27、semblies; Part 3: Dry alarm valve assemblies; Part 4: Water motor alarms; Part 5: Water flow detectors; Part 6: Pipe couplings; 1) In preparation. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 4 EN 12259-3:2000 BSI 2006 Part 7: Pipe h
28、angers; Part 8: Pressure switches; Part 9: Deluge alarm valve assemblies; Part 10: Multiple controls; Part 11: Medium and high velocity water sprayers; Part 12: Pump sets. Annexes A, B, C, D, E, F, G, H, I, J and K give test methods and are normative. Annex L gives an example of a test schedule suit
29、able for type approval of conventional designs and is informative. This standard is to be entrusted for use to qualified and experienced organizations which have a capability to design and manufacture to recognized international standards. According to the CEN/CENELEC Internal Regulations, the natio
30、nal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Li
31、censed Copy: sheffieldun sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 5 EN 12259-3:2000 BSI 2006 Foreword to amendment 1 This amendment EN 12259-3:2000/A1:2001 to the EN 12259-3:2000 has been prepared by Technical Committee CEN/TC 191, Fixed fire fighting syst
32、ems, the Secretariat of which is held by BSI. This amendment to the European Standard EN 12259-3:2000 has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Di
33、rective(s), see informative annex ZA, which is an integral part of this standard. It forms one part of EN 12259, covering components for automatic sprinkler systems and is included in a series of European Standards planned to cover: automatic sprinkler systems (EN 12259 gaseous extinguishing systems
34、 (EN 12094)1; powder systems (EN 12416)1; explosion protection systems (EN 26184); foam systems (EN 13565); hose reel systems (EN 671)1; smoke and heat control systems (EN 12101)1; water spray systems1. EN 12259 has the general title, Fixed fire fighting systems Components for sprinkler and water sp
35、ray systems, and will subdivided as follows: Part 1: Sprinklers; Part 2: Wet alarm valve assemblies; Part 3: Dry alarm valve assemblies; Part 4: Water motor alarms; Part 5: Water flow detectors; Part 6: Pipe couplings; Part 7: Pipe hangers; Part 8: Pressure switches; Part 9: Deluge alarm valve assem
36、blies; Part 10: Multiple controls; Part 11: Medium and high velocity water sprayers; Part 12: Sprinkler pump sets. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 6 EN 12259-3:2000 BSI 2006 Foreword to amendment 2 This European Standard
37、 (EN 12259-3:2000/A2:2005) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI. This Amendment to the European Standard EN 12259-3:2000 shall be given the status of a national standard, either by publication of an identical text o
38、r by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by August 2007. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requiremen
39、ts of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standar
40、d: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldu
41、n sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 7 EN 12259-3:2000 BSI 2006 1 Scope This part of EN 12259 specifies requirements for construction and performance of dry alarm valve assemblies, accelerators and exhausters used in automatic sprinkler systems confo
42、rming to annexes A and B of prEN 12845, Automatic sprinkler systems Design and installation. Auxiliary components and attachments to dry alarm valve assemblies, accelerators and exhausters are not covered by this standard. 2 Normative references This European Standard incorporates by dated or undate
43、d reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when in
44、corporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. Reference deleted ISO 65 Carbon steel tubes suitable for screwing in accordance with ISO 7-1. Reference deleted ISO 868 Plastics and ebonite Determination of indentation hardn
45、ess by means of a dorometer (shore hardness). ISO 898-1 Mechanical properties of fasteners Part 1: Bolts, screws and studs. ISO 898-2 Mechanical properties of fasteners Part 2: Nuts with specified proof load values. prEN 12845 Automatic sprinkler systems Design and installation. Licensed Copy: sheff
46、ieldun sheffieldun, na, Sat Oct 28 06:20:13 GMT+00:00 2006, Uncontrolled Copy, (c) BSI Page 8 EN 12259-3:2000 BSI 2006 3 Definitions For the purposes of this standard the following definitions apply. 3.1 accelerator quick opening device (see 3.18) to hasten the operation of a dry alarm valve using m
47、echanical means other than by reducing the installation air/inert gas pressure, to the valve trip point 3.2 alarm device mechanical or electrical device to sound an alarm on operation of the dry alarm valve EN 12259-2:1999 3.3 anti-flooding device device to prevent excessive water from entering any
48、relevant part or parts of the quick opening device (see 3.18) where this might prevent subsequent operation 3.4 anti-reset latch mechanism to prevent the sealing assembly from returning to its closed position after operation 3.5 automatic drain (valve) normally open valve to drain water automaticall
49、y from and vents the intermediate chamber (see 3.14) of dry alarm valve to atmosphere, when the dry alarm valve is in the ready condition (see 3.20) and limits water flow from the alarm line after the dry alarm valve operates 3.6 clapper type of sealing assembly (see 3.22) EN 12259-2:1999 3.7 differential pressure ratio ratio of service pressure to installation air/inert gas pressure at the