《BS-EN-12635-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-12635-2002.pdf（18页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 12635:2002 Industrial, commercial and garage doors and gates Installation and use The European Standard EN 12635:2002 has the status of a British Standard ICS 91.060.50 ? Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:47:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
2、 BS EN 12635:2002 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 14 October 2002 BSI 14 October 2002 ISBN 0 580 40574 5 Nat
3、ional foreword This British Standard is the official English language version of EN 12635:2002. The UK participation in its preparation was entrusted by Technical Committee B/538, Doors, windows, shutters, hardware and curtain walling, to Subcommittee B/538/5, Industrial, commercial and garage doors
4、 and gates, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalo
5、gue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corr
6、ect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests inf
7、ormed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 14, an inside back cover and a back cover. The BSI copyright date displayed in this document indi
8、cates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:47:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12635 September 2002 ICS 91.060.50 Englis
9、h version Industrial, commercial and garage doors and gates - Installation and use Portes quipant les locaux industriels et commerciaux et les garages - Installation et utilisation Tore - Einbau und Nutzung This European Standard was approved by CEN on 13 July 2002. CEN members are bound to comply w
10、ith the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Cent
11、re or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official ve
12、rsions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT
13、 EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12635:2002 E Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28
14、 09:47:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12635:2002 (E) 2 Contents page Foreword3 0Introduction3 1Scope 4 1.1General4 1.2Exclusions4 2Normative references 5 3Terms and definitions5 4Documentation.6 5Specific instructions6 5.1Installation6 5.2Labelling .7 5.3Hand over7 5.4Operation and
15、 use .7 5.5Maintenance and repairs.8 5.6Dismantling.8 5.7Change or upgrading.8 Annex A (normative) List of significant hazards9 Annex B (normative) Log book.10 Annex C (informative) Modification/conversion file.11 Annex D (informative) Information to the professional installers 12 Annex ZA (informat
16、ive) Relationship of this European Standard with EC Directives13 Bibliography14 Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:47:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12635:2002 (E) 3 Foreword This document EN 12635:2002 has been prepared by Technical Committee CEN/TC 33 “Door
17、s, windows, shutters, building hardware and curtain walling“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2003, and conflicting national standa
18、rds shall be withdrawn at the latest by March 2003. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA
19、, which is an integral part of this document. This standard is part of a series of European Standards for industrial, commercial and garage doors and gates. Annexes A and B are normative. Annexes C and D are informative. According to the CEN/CENELEC Internal Regulations, the national standards organ
20、izations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 0 Introduction
21、 This European product related standard has been prepared to meet the needs of manufacturers, users and safety enforcement authorities, with the primary purpose of providing information for installation and use, including maintenance, of industrial, commercial and garage doors and gates used by vehi
22、cular and pedestrian traffic. This standard is a type C standard as specified in EN 1070. Only correct installation and maintenance performed by a competent organisation or person in conformity with the instructions can ensure the safe and intended functioning operations of an installation. With the
23、 aim of clarifying the intention of the standard, the following market situations were considered when compiling this standard: a) when the installation is carried out by the manufacturer of the door (by his own personnel) or under his responsibility (via professional subcontractor), the product is
24、usually considered to be put on the market after installation. The installation requirements of this European Standard may be useful to draw up internal or contractual documents. b) when the installation of doors put on the market under the form of complete kits is carried out by the user or by his
25、appointed installer, this standard may be used to prepare the hand books to be supplied with the kit. c) when installation is of power operated doors consisting in the combination of separately sourced components, the installer is the manufacturer of the machinery which is usually considered to be p
26、ut on the market after installation. The information from the different sources needs to be compiled: - for the compatibility of the components and for their installation; - and to provide the information for safe use and maintenance to the end user. This European Standard may be used to draft the i
27、nformation for use and maintenance. This European Standard may also be used to draft the information to be provided with the component(s) used for the upgrading of existing doors (e.g. manually operated doors upgraded to power operation). With the aim of clarifying the intention of this European Sta
28、ndard and avoiding doubt when reading it, it was assumed when producing it that negotiation occurred between the manufacturer and the professional installer concerning the language. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:47:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12635:20
29、02 (E) 4 1 Scope 1.1 General This European Standard specifies the information to be provided by the door manufacturer and the components manufacturer to ensure safe installation, operation, use (including maintenance and repair) of doors, gates and barriers intended for installation in areas in the
30、reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail pre
31、mises which are mainly provided for the access of persons rather than vehicles or goods. This European Standard applies to manually operated and power operated doors, to doors and components intended to be installed by “non professional installers” and may also apply to the installation and use of u
32、pgrading component(s). The European Standard only applies to the doors and components manufactured after the date of publication. 1.2 Exclusions This European Standard does not apply to doors that are intended for a different use than the one described in 1.1 such as: - lock gates and dock gates; -
33、doors on lifts; - doors on vehicles; - doors mainly for the retention of animals; - theatre textile curtains; - railway barriers; - barriers used solely for vehicles. This European Standard does not apply to machinery other than power operated doors. This European Standard does not cover operation i
34、n environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2 or for domestic garage doors those specified in EN 55014-2. This European Standard does not cover: - products to be used in potential explosive atmosphere or on armoured doors; - programmab
35、le devices (see IEC 61508 series); - shock resistance of component (example IK code). These exclusions are based on technology used at the publication time of this standard. When a door is part of the load carrying structure of the building, the load carrying function is not dealt with in this Europ
36、ean Standard. Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:47:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12635:2002 (E) 5 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are ci
37、ted at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edit
38、ion of the publication referred to applies (including amendments). EN 292-2:1991, Safety of machinery Basic concepts, general principles for design Part 2: technical principles and specifications. EN 1050, Safety of machinery Principles for risk assessment. EN 1070, Safety of machinery Terminology.
39、EN 12433-1, Industrial, commercial and garage doors and gates Terminology Part 1: Types of doors. EN 12433-2, Industrial, commercial and garage doors and gates Terminology Part 2: Parts of doors. EN 12453, Industrial, commercial and garage doors and gates Safety in use of power operated doors Requir
40、ements. EN 12604, Industrial, commercial and garage doors and gates Mechanical aspects Requirements. prEN 13241-1:2002, Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics. 3 Terms and definitions For the pu
41、rposes of this European Standard, the terms and definitions in EN 1070, EN 12433-1 and EN 12433-2 apply. Whenever the term “door” is used in this standard, it shall also be deemed to cover all the types and variations of doors, gates and barriers in accordance with the scope, and as generally define
42、d in EN 12433-1. 3.1 professional installer competent person or an organisation offering to third parties door installation services including upgrading 3.2 competent person person, suitably trained, qualified by knowledge and practical experience, and provided with the necessary instructions to ena
43、ble the required installation to be carried out correctly and safely 3.3 log book book which includes general data related to a specific door, and which provides adequate space where records of inspections, tests, maintenance and any repair or modifications to the door can be kept 3.4 upgrading comp
44、onent component such as drive, control unit(s), safety device(s), added to an existing door to introduce or improve power operation Licensed Copy: sheffieldun sheffieldun, na, Sat Oct 28 09:47:10 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 12635:2002 (E) 6 3.5 owner natural or legal person who has
45、 the power of disposal of the door and takes the responsibility for its operation and use 4 Documentation The documentation shall be in accordance with EN 292-2:1991, 5.5 and shall include information of EN 292- 2:1991, annex A, 1.7.4. In addition, the requirements of this standard apply. All docume
46、ntation relevant to the door, the installation, the maintenance requirements and any incorporated diagrams, shall be legible and written in a language acceptable in the country in which the product is to be installed. Installation instructions to be used solely by the professional installer and whic
47、h are not intended to be handed over to the owner, may be written in any official language used in Europe (see Introduction). The documentation shall include all the necessary warning, advisory or cautionary notices. All symbols and diagrams incorporated into the documentation shall be in accordance
48、 with relevant European Standards. 5 Specific instructions 5.1 Installation The information shall state that the door or the individual components shall be installed in accordance with the installation instructions provided by the manufacturer. The installation instructions shall specify the level o
49、f competence in relation with the complexity of the door and components (see annex D). For example the manufacturer shall clearly state when the procedure specified can be adequately completed by non-professionals. The documentation shall include, as appropriate, instructions for the installation of the complete door or of the individual upgrading components (e.g. the installation instruction does not need to be issued when the manufacturer of the complete door installs it himself,