《BS-EN-15330-1-2007.pdf》由会员分享，可在线阅读，更多相关《BS-EN-15330-1-2007.pdf（34页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 15330-1:2007 Incorporating corrigendum no. 1 Surfaces for sports areas Synthetic turf and needle-punched surfaces primarily designed for outdoor use Part 1: Specification for synthetic turf The European Standard EN 15330-1:2007 has the status of a British Standard ICS 97.220.1
2、0 ? Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00:00 2008, Uncontrolled Copy, (c) BSI BS EN 15330-1:2007 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2007 BSI 2007 ISBN 978 0
3、 580 60822 3 National foreword This British Standard is the UK implementation of EN 15330-1:2007, incorporating corrigendum October 2007. It partially supersedes BS 7044-4:1991. EN 15330-1:2007 is one of a package of standards being produced by CEN/TC 217. On publication of the entire package, BS 70
4、44 will be withdrawn. The start and finish of text introduced or altered by corrigendum is indicated in the text by tags . Text altered by CEN corrigendum October 2007 is indicated in the text by . The UK participation in its preparation was entrusted to Technical Committee PRI/57, Surfaces for spor
5、ts areas. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer im
6、munity from legal obligations. Amendments issued since publication Amd. No. DateComments 17513 Corrigendum No. 1 31 December 2007 See national foreword Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EUROPEAN S
7、TANDARD NORME EUROPENNE EUROPISCHE NORM EN 15330-1 March 2007 ICS 97.220.10 Incorporating corrigendum October 2007 English Version Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf Sols sportifs - Surf
8、aces en gazon synthtique et surfaces aiguilletes principalement destines lusage en extrieur - Partie 1: Spcifications pour le gazon synthtique Sportbden - berwiegend fr den Auenbereich hergestellte Kunststoffrasenflchen und vernadelte Belge - Teil 1: Festlegungen fr Kunststoffrasen This European Sta
9、ndard was approved by CEN on 10 February 2007. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerni
10、ng such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own l
11、anguage and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania
12、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN
13、All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15330-1:2007: E Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 15330-1:2007 (E) 2 Contents Pa
14、ge Foreword4 1 Scope 5 2 Normative references5 3 Terms and definitions .7 4 General7 4.1 Resistance to artificial weathering.7 4.2 Water permeability.7 4.3 Joint strength.7 4.4 Abrasion resistance of non-filled surfaces.8 5 Surfaces designed primarily for hockey .8 5.1 General8 5.2 Vertical ball reb
15、ound .8 5.3 Ball roll8 5.4 Shock absorption.8 5.5 Vertical deformation8 5.6 Rotational resistance 8 6 Surfaces designed primarily for football.9 6.1 General9 6.2 Vertical ball rebound .9 6.3 Ball roll9 6.4 Shock absorption.9 6.5 Vertical deformation9 6.6 Rotational resistance 9 6.7 Resistance to sim
16、ulated use 9 7 Surfaces designed primarily for rugby union.10 7.1 General10 7.2 Vertical ball rebound .10 7.3 Critical fall height.10 7.4 Shock absorption.10 7.5 Vertical deformation10 7.6 Rotational resistance 10 7.7 Resistance to simulated use 10 7.8 Tensile properties of carpet11 8 Surfaces desig
17、ned primarily for tennis.11 8.1 General11 8.2 Vertical ball rebound .11 8.3 Angled ball behaviour .11 8.4 Shock absorption.11 8.5 Slip resistance11 9 Surfaces designed for multi-sports use12 9.1 General12 9.2 Vertical ball rebound .12 9.3 Ball roll12 9.4 Shock absorption.13 9.5 Rotational resistance
18、 13 9.6 Angled ball behaviour .13 9.7 Resistance to simulated use of surfaces designed to allow the use of studded footwear .13 Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 15330-1:2007 (E) 3 10 Informati
19、on to be provided by the manufacturer or supplier .14 Annex A (informative) Site tests15 A.1 General .15 A.2 Hockey pitches 16 A.3 Football pitches.17 A.4 Combined hockey and football pitches 18 A.5 Rugby pitches18 A.6 Tennis courts.19 Annex B (informative) Surfaces for multi-sports use21 Annex C (n
20、ormative) Preparation of wet test pieces 26 Annex D (informative) Ball rebound27 Annex E (normative) Information to be supplied by the manufacturer or supplier regarding maintenance.28 Annex F (normative) Product identification.29 Annex G (normative) Surface regularity.30 Bibliography31 Licensed Cop
21、y: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 15330-1:2007 (E) 4 Foreword This document (EN 15330-1:2007) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is he
22、ld by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. EN 15330 consists of the following
23、 parts, under the general title Surfaces for sports areas Synthetic turf and needle-punched surfaces primarily designed for outdoor use: Part 1: Specification for synthetic turf Part 2: Specification for needle-punched surfaces According to the CEN/CENELEC Internal Regulations, the national standard
24、s organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu
25、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 15330-1:2007 (E) 5 1 Scope This European Standard specifies performance and du
26、rability characteristics for synthetic turf sports surfaces used primarily outdoors. Five categories of surface are covered, each based on the principal sporting use of the surface, as follows: surfaces designed primarily for hockey; surfaces designed primarily for association football; surfaces des
27、igned primarily for rugby union for training purposes; NOTE Under the Laws of the Game of Rugby Union, surfaces for rugby union matches have to comply with IRB Regulation 22. surfaces designed primarily for tennis; and surfaces designed for multi-sports use. The requirements are intended to apply to
28、 surfaces used for community, educational and recreational sport. For professional and elite levels of competition, many sports governing bodies have published their own specifications; the requirements of the sports governing bodies might differ from those detailed in this European Standard and fac
29、ility developers are advised to ensure that they select surfaces offering the correct level of performance for the level of competition played on the pitch or court. This European Standard is based on type approval testing of products in the laboratory. Selected requirements may also be used on site
30、 to assess the suitability of installed surfaces. Guidance on the testing of installations is given in Annex A. Some of the surfaces covered by this European Standard are designed to allow users to wear footwear fitted with studs. An example of a typical stud is given in EN 15306. For the purposes o
31、f this European Standard, multi-dimpled shoe profiles often found on footwear used on sand-filled or non-filled synthetic turfs are not considered to be studs. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only
32、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 430, Resilient floor coverings Determination of mass per unit area EN 933-1, Tests for geometrical properties of aggregates Part 1: Determination of particle size
33、distribution Sieving method EN 1097-3, Tests for mechanical and physical properties of aggregates Part 3: Determination of loose bulk density and voids EN 1177, Impact absorbing playground surfacing Safety requirements and test methods EN 1969, Surfaces for sports areas Determination of thickness of
34、 synthetic sports surfaces EN 12230, Surfaces for sports areas Determination of tensile properties of synthetic sports surfaces Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 15330-1:2007 (E) 6 EN 12235, Su
35、rfaces for sports areas Determination of vertical ball behaviour EN 12228:2002, Surfaces for sports areas Determination of joint strength of synthetic surfaces EN 12229, Surfaces for sports areas Procedure for the preparation of synthetic turf and needle-punch test pieces EN 12234, Surfaces for spor
36、ts areas Determination of ball roll behaviour EN 12616, Surfaces for sports areas Determination of water infiltration rate EN 13036-4:2003, Road and airfield surface characteristics Test methods Part 4: Method for measurement of slip/skid resistance of a surface The pendulum test EN 13036-7, Road an
37、d airfield surface characteristics Test methods Part 7: Irregularity measurement of pavement courses: the straightedge test EN 13672, Surfaces for sports areas Determination of resistance to abrasion of non-filled synthetic turf EN 13744, Surfaces for sports areas Procedure for accelerated ageing by
38、 immersion in hot water EN 13864, Surfaces for sports areas - Determination of tensile strength of synthetic yarns EN 13865, Surfaces for sports areas Determination of angled ball behaviour Tennis EN 14808, Surfaces for sports areas Determination of shock absorption EN 14809, Surfaces for sports are
39、as Determination of vertical deformation EN 14836, Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering EN 14955, Surfaces for sports areas Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas EN 15301-1, Surfaces for sports
40、areas Part 1: Determination of rotational resistance EN 15306, Surfaces for outdoor sports areas Exposure of synthetic turf to simulated wear EN 20105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) EN ISO 13934-1, Textiles Tensile prope
41、rties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999) ISO 48, Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) ISO 1763, Carpets Determination of number of tufts and/or lo
42、ops per unit length and per unit area ISO 2549, Textile floor coverings Hand-knotted carpets Determination of tuft leg length above the woven ground ISO 4919, Textile floor coverings Determination of tuft withdrawal force ISO 8543, Textile floor coverings Methods for determination of mass ISO 11357-
43、3, Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00:00 2008, Uncontrolled Copy, (c) BSI EN 15330-1:2007 (E) 7 3 Terms
44、 and definitions For the purposes of this document, the following terms and definitions apply. 3.1 synthetic turf surface sports surface comprised of a carpet of tufted, knitted or woven construction whose pile is designed to replicate the appearance of natural grass NOTE not necessarily in colour 3
45、.2 non-filled synthetic turf synthetic turf surface that does not contain any form of unbound particulate fill within the pile of the carpet 3.3 filled synthetic turf synthetic turf surface whose pile is either totally filled or partly filled with an unbound particulate material NOTE typically sand,
46、 rubber or sand and rubber mixes 3.4 surface for multi-sports synthetic turf surface designed to be used for more than one sport NOTE For further information see Annex B. 4 General 4.1 Resistance to artificial weathering 4.1.1 Colour fastness When tested in accordance with EN 20105-A02 following art
47、ificial weathering in accordance with EN 14836, the change in colour of the weathered synthetic turf compared with an unaged test specimen of the synthetic turf shall be Grey Scale 4 or greater. 4.1.2 Tensile strength When tested in accordance with EN 13864 following artificial weathering in accorda
48、nce with EN 14836, the tensile strength of the pile yarn(s) used to form the synthetic turf pile shall be within 50 % of the tensile strength of the unaged yarn. 4.2 Water permeability When tested in accordance with EN 12616, the water infiltration rate of surfaces designed to be permeable shall be
49、equal to or greater than 180 mm/h. 4.3 Joint strength 4.3.1 Stitched joints When tested in accordance with Method 1 of EN 12228:2002, following immersion in hot water in accordance with EN 13744, the strength of stitched joints shall be equal to or greater than 1 000 N/100 mm. Licensed Copy: London South Bank University, London South Bank University, Fri Feb 15 07:25:19 GMT+00