《BS-EN-13280-2001.pdf》由会员分享，可在线阅读，更多相关《BS-EN-13280-2001.pdf（38页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13280:2001 Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water The European Standard EN 13280:2001 has the status of a British Standard ICS 23.020.10; 91.140.60 NO COPYING WITHOUT BSI PERMISSIO
2、N EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:53:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13280:2001 This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for Materials and Chemicals,
3、was published under the authority of the Standards Policy and Strategy Committee on 22 October 2001 BSI 22 October 2001 ISBN 0 580 38047 5 National foreword This British Standard is the official English language version of EN 13280:2001. It supersedes BS 7491-1:1991, -2:1992 and -3:1994 which are wi
4、thdrawn. The UK participation in its preparation was entrusted by Technical Committee PRI/5, UK steering committee for CEN/TC 210, to Subcommittee PRI/5/2, GRP tanks for water cisterns, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on reque
5、st to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of th
6、e BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid
7、 enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document com
8、prises a front cover, an inside front cover, the EN title page, pages 2 to 35 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Oct
9、 29 09:53:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13280 August 2001 ICS 23.020.10 English version Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water Spcific
10、ation pour citernes monoblocs et rservoirs compartiments en PRV pour le stockage hors sol deau froide Spezifikation fr textilglasverstrkte Einkammer- oder Mehrkammertanks fr die oberirdische Lagerung von Kaltwasser This European Standard was approved by CEN on 9 June 2001. CEN members are bound to c
11、omply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Manageme
12、nt Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the offi
13、cial versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT
14、 EUROPEN DENORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13280:2001 E Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29
15、09:53:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13280:2001 (E) 2 Contents Page Foreword. 3 1 Scope 3 2 Normative references 3 3 Terms and definitions 4 4 Designation. 6 5 Materials 7 6 Appearance and configuration. 8 7 Requirements for one-piece cisterns and sectional tanks 10 8 Requirements
16、for class A1 and A2 one-piece cisterns and sectional tanks only . 14 9 Requirements for class A1 one-piece cisterns and sectional tanks only 15 10 Requirements for class B one-piece cisterns. 15 11 Marking . 16 Annex A (normative) Method of test for water absorption. 17 Annex B (normative) Method of
17、 test for deformation. 18 Annex C (normative) Method of test for impact resistance . 20 Annex D (normative) Sectional tank panel pressure test. 22 Annex E (normative) Method of test for leaks in a one-piece cistern. 23 Annex F (normative) Method of test for impact resistance of one-piece cistern cov
18、ers 24 Annex G (normative) Method of test for the assessment of ingress of particles and insects. 25 Annex H (normative) Method for the hot water test for one-piece cisterns. 27 Annex J (normative) Method of test for the assessment of rigidity of one-piece cistern and sectional tank covers 30 Annex
19、K (informative) Recommendations for thermal insulation . 31 Annex L (informative) Information to be supplied by the purchaser. 33 Annex M (informative) One-piece cistern and sectional tank foundation and installation. 34 Bibliography. 35 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:53:0
20、7 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13280:2001 (E) 3 Foreword This European Standard has been prepared by Technical Committee CEN/TC 210, GRP tanks and vessels, the Secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by pub
21、lication of an identical text or by endorsement, at the latest by February 2002, and conflicting national standards shall be withdrawn at the latest by February 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to imple
22、ment this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 1 Scope This European Standard specifies the requirements for rectangular a
23、nd vertical cylindrical glass reinforced plastics (GRP) one-piece cisterns and rectangular sectional tanks for the storage of water above ground for both domestic and industrial use within the following capacity ranges; a) one-piece cistern 500 l to 100 000 l; b) sectional tank 500 l and larger. Par
24、ticular requirements for additional components for cisterns for domestic use are also included. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text an
25、d the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies (
26、including amendments). EN 59, Glass reinforced plastics Measurement of hardness by means of a Barcol impresser. EN 578, Plastics piping systems Plastics pipes and fittings Determination of the opacity. EN 10025:1993, Hot rolled products of non-alloy structural steels Technical delivery conditions. E
27、N 10088-3:1995, Stainless steels Part 3: Technical delivery for semi finished products, bar, rod and sections for general purposes. prEN 13121-1:1998, GRP tanks and vessels for use above ground Part 1: Raw materials Acceptance conditions and usage conditions. EN ISO 2078, Textile glass Yarns Designa
28、tion. ISO 75-3:1993, Plastics Determination of temperature of deflection under load Part 3: High strength thermosetting laminates and long-fibre-reinforced plastics. ISO 472, Polyester resin systems Designation. ISO 1461, Metallic coatings Hot dip galvanized coatings on fabricated ferrous products R
29、equirements. ISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C. ISO 8605, Textile glass reinforced plastics; sheet moulding compound (SMC); basis for a specification. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:53:07 GMT+00:00 2006, Un
30、controlled Copy, (c) BSI EN 13280:2001 (E) 4 3 Terms and definitions For the purposes of this European Standard the following terms and definitions apply. 3.1 cistern 3.1.1 one-piece cistern rectangular or vertical cylindrical fixed container for holding water at atmospheric pressure at a maximum te
31、mperature of 39 C 3.1.2 sectional tank rectangular fixed container assembled from panels for the storage of water at atmospheric pressure at a maximum temperature of 39 C. This temperature is higher than is acceptable for drinking water that has a maximum upper limit 25 C as defined within the Drink
32、ing Water Directive, 80/778/EEC 3.2 water for domestic purposes water supplied for drinking, washing, cooking and sanitary purposes 3.3 feed and expansion cistern cistern for supplying cold water to and receiving expansion water from a hot water system 3.4 primary expansion cistern cistern connected
33、 to a primary circuit of space heating or hot water heating system which accommodates the increase in volume of water in that system when it is heated from cold 3.5 secondary water heating system part of the hot water system comprising the cold feed pipe, any storage cistern, the water heater and fl
34、ow and return pipework from which hot water for use is conveyed to all points of draw off 3.6 nominal capacity volume contained in the cistern, measured up to the top edge of the side walls 3.7 actual capacity volume contained in the cistern up to the maximum working level 3.8 top edge of tank top e
35、dge of the upper side panels or the lowest point of the cover, whichever is the lower 3.9 raised level inlet chamber enclosed chamber above the level of the cover incorporating an access lid or panel, permitting the level control mechanism or piped inlet to be mounted at a higher level than would ot
36、herwise be possible Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:53:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13280:2001 (E) 5 3.10 maximum working depth depth of water to the lower edge of the overflow pipe or warning pipe, whichever is the lower 3.11 jointing sealant material u
37、sed to effect a watertight seal between the modular panels of a sectional tank construction 3.12 vent pipe pipe open to the atmosphere and used in connection with a hot water system for the escape of air and/or steam 3.13 vent fitting on the cistern cover providing a protected opening to atmosphere
38、to allow for the movement of air resulting from changes in the water level so that the water always remains at atmospheric pressure 3.14 warning pipe pipe so fixed that its outlet, whether inside or outside a building, is in a conspicuous position where the discharge of water can be readily seen 3.1
39、5 overflow pipe pipe connected to the cistern to discharge any overflow therefrom 3.16 bracing system internal or external structure which provides support to the side walls, divisions, weirs and baffles of the cistern or tank 3.17 baffle internal wall within a cistern or tank, which partially subdi
40、vides the cistern or tank in order to increase the length of the flowpath between the inlet and the outlet of the cistern or tank 3.18 weir internal wall within a cistern or tank, which divides the cistern or tank but to less than its full depth such that the contents can spill over from one side of
41、 the weir to the other 3.19 division internal wall within a cistern or tank which divides the tank into watertight compartments 3.20 tank base panel or panels, principally in the horizontal plane, which form the bottom of the sectional tank Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:5
42、3:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13280:2001 (E) 6 3.21 foundation structure upon which the cistern or tank is constructed 3.22 rupture complete or catastrophic structural failure 3.23 cover rigid close-fitting cover secured to cistern or tank sides which excludes light and the ingr
43、ess of particles and/or insects from the cistern or tank 3.24 test water line line at 100 mm below the top edge of the side walls of a one-piece cistern 4 Designation Each one-piece cistern or sectional tank shall be designated by a code with the following components, in the order presented. a) The
44、number and date of this European Standard i.e. EN 13280: 2001. b) The capital letters GRP. c) The capital letters and numbers “A1”, “A2” or “B” where: “A1” and “A2” indicates class A one-piece cisterns or sectional tanks, which are for use in potable water storage as one of the following: 1) a cold
45、water storage one-piece cistern or sectional tank; 2) a feed one-piece cistern or sectional tank or a combined feed and expansion one-piece cistern or sectional tank, supplying a secondary water heating system; 3) a combination of these. “A1” indicates a class A one-piece cistern or sectional tank,
46、which is for use in potable water storage, and is supplied for use with the additional fittings specified in clause 9. “A2” indicates a class A one-piece cistern or sectional tank, which is for use in potable water storage and is supplied for use without the additional fittings specified in clause 9
47、. NOTE These fittings are required for use in potable water storage but in that case are supplied and fitted by other parties. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:53:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13280:2001 (E) 7 “B” indicates a class B one-piece cistern or s
48、ectional tank which is for use in the storing of cold non-potable water as one of the following: 1) a cold non-potable water one-piece cistern or sectional tank; 2) a combined feed and expansion one-piece cistern or sectional tank to a primary circuit; 3) an expansion one-piece cistern or sectional
49、tank. d) A number representing the nominal capacity in litres. For example, a sectional tank of nominal capacity 20 000 l intended for use in potable water storage and supplied without the additional fittings specified in clause 9 would be designated as EN 13280 :2001/GRP/A2/2000. 5 Materials 5.1 Resins Polyester resin systems, where used, shall conform to ISO 472 and be selected from the resin types specified in prEN 13121-1:1998. 5.2 Fibrous reinforcement The glass fibre reinforcement used shall be of type “E” glass. A