《BS-EN-13417-1-2001.pdf》由会员分享，可在线阅读，更多相关《BS-EN-13417-1-2001.pdf（10页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13417-1:2001 Part 1: Designation The European Standard EN 13417-1:2001 has the status of a British Standard ICS 83.120 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:45:07 GMT+00:00 2006, Uncontr
2、olled Copy, (c) BSI BS EN 13417-1:2001 This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for Materials and Chemicals, was published under the authority of the Standards Policy and Strategy Committee on 04 December 2001 BSI 04 December 2001 IS
3、BN 0 580 38759 3 National foreword This British Standard is the official English language version of EN 13417-1:2001. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepegs, which has the responsibility to: A list of o
4、rganizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Sta
5、ndards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Stan
6、dard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European development
7、s and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No
8、. DateComments Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:45:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13417-1 October 2001 ICS 59.100.01 English version Reinforcement - Specifications for woven fabrics - Part 1: Designation Ren
9、fort - Spcifications des tissus - Partie 1: DsignationVerstrkung - Spezifikationen fr Gewebe - Teil 1: Bezeichnung This European Standard was approved by CEN on 16 August 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu
10、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English
11、, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic,
12、 Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B
13、-1050 Brussels 2001 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13417-1:2001 E Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:45:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13417-1:2001 (E) 2 Contents page Forewo
14、rd3 1Scope 3 2Normative references 3 3Terms and definitions4 4Designation System.4 4.1Data Block 14 4.2Data Block 25 4.3Data Block 35 4.4Data Block 46 5Coding Example for a woven glass fibre fabric6 6Coding Example for a woven carbon fibre fabric.6 Bibliography7 Licensed Copy: sheffieldun sheffieldu
15、n, na, Sun Oct 29 12:45:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13417-1:2001 (E) 3 Foreword This European Standard has been prepared by Technical Committee CEN/TC 249 “Plastics“, the secretariat of which is held by IBN. This European Standard shall be given the status of a national standard
16、, either by publication of an identical text or by endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest by April 2002. EN 13417 consists of the following parts, under the general titre “Reinforcement Specifications for woven fabrics“: ? Part 1
17、 : Designation ? Part 2 : Methods of test and general requirements ? Part 3 : Specific requirements This standard includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:
18、 Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 1 Scope 1.1This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be u
19、sed as a basis for specifications of fabrics used for the reinforcement of plastics. 1.2This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, et
20、c. and which are intended to provide reinforcement in plastic composite materials. The material used may be used on its own or in combination (hybrids). 1.3The designation of a fabric is structured in a product hierarchy which includes several levels which determine families and sub-families of fabr
21、ics. It is not intended that this hierarchy takes into account all the attributes of individual fabrics which may use different yarn types or different yarn counts. Neither is it intended to imply that woven fabrics having the same designation give necessarily the same performance. This Part 1 of EN
22、 13417 does not give engineering data, performance data or data which may be required to specify woven fabrics for a particular application or method of processing. If such additional properties are required they shall be determined in accordance with the test methods specified in EN 13417-2. 2 Norm
23、ative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of
24、 any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:45:07 GMT+00:00 2006, U
25、ncontrolled Copy, (c) BSI EN 13417-1:2001 (E) 4 EN 13417-2; Reinforcement Specifications for woven fabrics Part 2: Methods of test and general requirements EN 13417-3; Reinforcement Specifications for woven fabrics Part 3: Specific requirements ISO 472, Plastics Vocabulary. 3 Terms and definitions F
26、or the purposes of this Part 1 of EN 13417 the terms and definitions given in ISO 472 apply. Additional terms are defined in Part 2 of this standard. 4 Designation System The designation system for woven reinforcement fabrics is based on the following standardised pattern (see Note) Designation Iden
27、tity BlockIndividual Item Block Data BlockData BlockData BlockData Block Standard Number Block 1234 It consists of an Identity Block comprising the European Standard number and an Individual Item Block. For unambiguous coding the Individual Item Block is subdivided into 4 data blocks comprising the
28、following information: ? Block 1 : Identification of the reinforcing material type and grade ? Block 2 : Construction fabric properties ? Block 3 : Weight in g/m2 ? Block 4 : Warp/weft ratio (used only for unidirectional, mixed and hybrid fabrics) To ensure legibility: ? the description blocks shall
29、 be under square brackets; ? spaces shall be inserted between blocks; ? individual positions inside blocks shall be separated from each other by a stroke between two spaces; ? if a data block is not used, the block does not appear. NOTEThis standardised pattern is a modification of the frame text gi
30、ven in ISO 1043-2, adapted to the designation of these reinforcement products. 4.1 Data Block 1 In this data block the material type and grade are identified by letters according to Table 1. In the case of combinations of different materials (hybrid or mixed fabrics), the different materials and gra
31、de shall be identified by their letters with each constituent separated by a comma. The materials shall appear in descending order of their content by weight in the fabric. For each constituent the letters shall be followed by a number equal to the percentage content by total weight rounded to the n
32、earest 5 %. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:45:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13417-1:2001 (E) 5 Table 1 Code letters for the material type and grade in the fabric Code LetterMaterial typeMaterial grade AHMAAramidHMHigh Modulus ASMAAramidTMTailor-made Modu
33、lus GEGGlassEE Glass GAGGlassAA Glass GARGGlassARAR Glass GCGGlassCC Glass GDGGlassDD Glass GQGGlassQQuartz Glass GR or GSGGlassR or SR or S Glass respectively GERGGlassERE-CR Glass CHMCCarbonHMHigh Modulus CUHMCCarbonUHMUltra High Modulus CHTCCarbonHTHigh Tenacity CIMCCarbonIMIntermediate Modulus K
34、KCeramic PPPolyethylene 4.2 Data Block 2 In this data block the construction fabric properties are defined as follows: In positions 1 and 2: the yarns designation for warp and for weft (simplified and restricted to the type of yarn and its linear densities). NOTE“nt0“ , when occuring, means a collec
35、tion of n parallel (0 twist) yarns. In positions 3 and 4: the yarn count (given in ends per cm for warp and picks per cm for weft). In position 5: the weave type (identified by letters according to Table 2 ; see ISO 2113 for information). Table 2 Code letterWeave type PLPlain 22TW2x2 Twill CRCrowfoo
36、t Satin 5SS5 Shaft Satin 8SS8 Shaft Satin BBasket LLeno MLMock Leno 4.3 Data Block 3 In this data block the mass per unit area of the finished fabric is identified by a number equal to the nominal mass in grams per square metre. This is the nominal mass per unit area around which the specific tolera
37、nces shall be given in the applicable clause of Part 3 of this standard. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:45:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13417-1:2001 (E) 6 4.4 Data Block 4 Ratios data are used only for unidirectional, mixed and hybrid fabrics. For Unidi
38、rectional fabrics, the ratio is identified by a number equal to the percentage of the total fabric weight per unit area which is in the warp. For mixed and hybrids, it is recognised that the warp/weft ratio may not be fully proportional to the weave density in the 2 directions in the case of hybrids
39、, due to the potentially different material densities. 5 Coding Example for a woven glass fibre fabric European Standard Data block 1 Glass fibre reinforcement, E Glass Data block 2 Yarn designation, yarn count and weave type Data block 3 Weight in grams per square meter EN 13417G/EEC9 68/EC9 68/17.
40、4/12/PL203 6 Coding Example for a woven carbon fibre fabric European Standard Data block 1 Carbon fibre reinforcement, High Tenacity grade Data block 2 Yarn designation, yarn count and weave type Data block 3 Weight in grams per square meter EN 13417C/HTCF 67/CF 67/7/7 PL93 Licensed Copy: sheffieldu
41、n sheffieldun, na, Sun Oct 29 12:45:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13417-1:2001 (E) 7 Bibliography ISO 2113, Reinforcement fibres - Woven fabrics - Basis for a specification. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 12:45:07 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
42、BS EN 13417-1:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revision
43、s British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambigu
44、ity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers
45、automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In resp
46、onse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards throug
47、h its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with s
48、tandards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Co
49、pyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbol