《BS-EN-13733-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-13733-2002.pdf（16页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13733:2002 Products and systems for the protection and repair of concrete structures Test methods Determination of the durability of structural bonding agents The European Standard EN 13733:2002 has the status of a British Standard ICS 83.180; 91.080.40 NO COPYING WITHOUT BSI
2、PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:45:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13733:2002 This British Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy
3、 Committee, was published under the authority of the Standards Policy and Strategy Committee on 1 July 2002 BSI 1 July 2002 ISBN 0 580 39978 8 National foreword This British Standard is the official English language version of EN 13733:2002. The UK participation in its preparation was entrusted by T
4、echnical Committee B/517, Concrete, to Subcommittee B/517/8, Protection and repair of concrete structures, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement int
5、ernational or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not pu
6、rport to include all the necessary provisions of a contract. Users of this publication are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible interna
7、tional/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN tit
8、le page, pages 2 to 13 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:45:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
9、 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13733 May 2002 ICS 83.180; 91.080.40 English version Products and systems for the protection and repair of concrete structures - Tests methods - Determination of the durability of structural bonding agents Produits et systmes pour la protection e
10、t la rparation des structures en bton - Mthodes dessai - Dtermination de la durabilit des produits de collage structural Produkte und Systeme fr den Schutz und die Instandsetzung von Betontragwerken - Prfverfahren - Bestimmung der Dauerhaftigkeit von Klebstoffen fr konstruktive Zwecke This European
11、Standard was approved by CEN on 30 December 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references conce
12、rning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own la
13、nguage and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, S
14、weden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Membe
15、rs. Ref. No. EN 13733:2002 E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:45:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13733:2002 (E) 2 Contents page Foreword3 1Scope 4 2Normative references 4 3Principle4 4Equipment.4 4.1Concrete to concrete composites (see Figures 1a) and 1b)4 4
16、.2Steel to steel composite (see Figure 2) .5 4.3Environmental cabinets 5 5Environmental regimes.5 5.1Thermal Cycle.5 5.2Warm-moist environment5 6Preparation of test specimens5 6.1General5 6.2Concrete to concrete composites6 6.3Production of steel-to-steel composite specimens6 7Test procedures.6 7.1T
17、esting of the concrete-to-concrete specimens.6 7.2Testing of steel-to-steel specimens.7 8Test report 7 8.1Concrete to concrete composite specimen7 8.2Steel-to-steel composite specimen7 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:45:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13733
18、:2002 (E) 3 Foreword This document EN 13733:2002 has been prepared by Technical Committee CEN/TC 104 “Concrete and related products“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by end
19、orsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest by December 2002. This standard does not supersede any other European Standard. It has been prepared by Sub-Committee 8 “Products and systems for the protection and repair of concrete struct
20、ures“, the secretariat of which is held by AFNOR. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ir
21、eland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:45:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13733:2002 (E) 4 1 Scope The purpose of this European Standard is to define
22、 laboratory methods of testing to ascertain the durability of structural bonding agents in composite systems involving the bonding of hardened concrete to hardened concrete, fresh concrete to hardened concrete and steel-to-steel. 2 Normative references This European Standard incorporates by dated or
23、 undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only
24、 when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 1766, Products and systems for the protection and repair of concrete structures - Test methods Reference concretes for testing. EN 12390-4, T
25、esting hardened concrete Part 4: Compressive strength Specification for testing machines. ISO 8501-1, Preparation of steel substrates before application of paints and related products Visual assessments of surface cleanliness Part 1: Rust grades and preparation grades of uncoated steel substrates an
26、d of steel substrates after overall removal of previous coatings. 3 Principle This standard describes a thermal cycling regime and a warm-moist environment, which are applied in turn to composite systems incorporating a structural bonding agent. For testing the structural bonding of concrete, the sp
27、ecimen consists of three concrete cubes bonded in line which are then exposed to an environmental regime prior to being subjected to a compressive shear force applied in the plane of the bond line. For testing the structural bonding of steel, two steel plates are bonded together and subjected to a c
28、leavage force applied by the insertion of a wedge. The stressed specimen is then exposed to an environmental regime during which measurements are taken. 4 Equipment 4.1 Concrete to concrete composites (see Figures 1a) and 1b) 4.1.1Steel mould for casting 100 mm 100 mm 100 mm concrete cubes. 4.1.2Jig
29、 to ensure accurate alignment when bonding the 100 mm 100 mm 100 mm cubes. 4.1.3Steel mould 100 mm 100 mm 302 mm for casting fresh concrete to hardened concrete specimens. 4.1.4Compression testing machine conforming to EN 12390-4 capable of testing the bonded specimens conforming to 6.2.1 and 6.2.2
30、in compressive shear. 4.1.5Test rig support to align the bonded cube assembly securely in the testing machine whilst the compressive shearing force is applied parallel to the planes of the bonds and distributed evenly between them, as depicted in Figures 1a) and 1b). Licensed Copy: sheffieldun sheff
31、ieldun, na, Mon Oct 30 05:45:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13733:2002 (E) 5 4.2 Steel to steel composite (see Figure 2) 4.2.12 steel plates 150 mm 25 mm 3,0 mm. 4.2.2Steel wedge having dimensions depicted in Figure 2. 4.2.3PVC tape. 4.2.4Travelling microscope of magnification 15,
32、fitted with a rule graduated in mm. 4.3 Environmental cabinets 4.3.1Temperature controlled conditioning cabinet adjustable to within 1 C. 4.3.2Programmable temperature cabinet capable of heating to (+ 55 2) C and cooling to (- 25 2) C. 4.3.3Climatic chamber capable of heating to (+ 40 2) C at (95 5)
33、 % relative humidity. 5 Environmental regimes 5.1 Thermal Cycle Thermal cycling takes place in a programmable temperature cabinet. The thermal cycling regime is depicted in Figure 3. After 15 min initial cooling from 20 C, the cycle starts from 25 C according to the detail given in Figure 3. Each th
34、ermal cycle consists of a cooling phase over 6 h in air at a temperature of (- 25 2) C followed by a heating phase over 6 h in air at a temperature of (+ 55 2) C. The cooling and the heating shall take place at a rate of 3 C/min. One cycle lasts for 12 h and comprises the following stages : 333 min
35、air storage at T = (- 25 2) C ; 27 min heating in air to T = (+ 55 2) C ; 333 min air storage at T = (+ 55 2) C ; 27 min cooling in air to T = (- 25 2) C. During any interruption of the cycling the specimen shall be stored at standard climate conditions (21 2) C/(60 10) % relative humidity). The com
36、plete thermal cycling regime shall consist of 50 cycles. 5.2 Warm-moist environment The warm-moist environmental regime shall consist of six months exposure to an environment maintained at (+ 40 2) C, (95 5) % relative humidity). During any interruption to the regime the specimen shall be stored at
37、standard climate conditions (21 2) C/(60 10) % relative humidity). 6 Preparation of test specimens 6.1 General For applications involving bonded plate reinforcement six specimens of hardened concrete to hardened concrete and six specimens of steel-to-steel shall be produced for testing associated wi
38、th each environmental regime. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:45:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13733:2002 (E) 6 For applications involving bonded mortar or concrete six specimens of either hardened concrete to hardened concrete or fresh concrete to harden
39、ed concrete shall be produced for testing associated with each environmental regime. For each environmental regime three specimens shall be tested. A further three specimens shall be maintained at standard climate conditions (21 2) C, (60 10) % relative humidity) for control purposes. 6.2 Concrete t
40、o concrete composites 6.2.1 Production of the hardened concrete to hardened concrete specimens Concrete cubes of dimensions 100 mm 100 mm 100 mm shall be cast and cured in accordance with EN 1766. On one cube, two of the formed faces to be bonded and on two cubes, the formed face to be bonded, shall
41、 be gritblasted in accordance with the requirements of EN 1766. Immediately prior to bonding these gritblasted surfaces shall be vacuumed to remove any dust. Mix the components of the adhesive to be tested and apply an even layer approximately 1mm thick to each of the prepared concrete surfaces in a
42、ccordance with the manufacturers instructions. Bond the three cubes together to produce a specimen with a bond line approximately 1mm thick as shown in Figure 1. It is necessary to use a jig to ensure accurate alignment of adherents. Allow the adhesive to cure for at least 7 days at (+ 21 2) C, (60
43、10) % relative humidity. 6.2.2 Production of the fresh concrete to hardened concrete specimens Concrete cubes of dimensions 100 mm 100 mm 100 mm shall be cast and cured in accordance with EN 1766. On two of the cubes, the cast face to be bonded shall be gritblasted in accordance with the requirement
44、s of EN 1766. Immediately prior to bonding this gritblasted surface shall be vacuumed to remove any dust. The components of the adhesive shall be mixed and an even layer approximately 1 mm thick applied to the prepared concrete surfaces in accordance with the manufacturers instructions. Place the tw
45、o cubes at a separation of (102 0,2) mm in the 100 mm 100 mm 302 mm mould. The concrete shall be poured into the central 100 mm 100 mm 100 mm volume and carefully compacted by hand in accordance with EN 1766. The complete assembly shall be cured for at least 28 days at (+ 21 2) C, (60 10) % relative
46、 humidity. 6.3 Production of steel-to-steel composite specimens Degrease one side of each steel plate using a suitable degreasing agent and then gritblast to grade Sa 2.5 according to ISO 8501-1. The gritblasted surface shall then be vacuumed to remove any dust. Glue PVC tape (12,5 mm wide) on one e
47、nd of the plate so that the wedge can be inserted there (see Figure 2). Mix the components of the adhesive and apply an even layer approximately 0,5 mm thick to each of the prepared steel surfaces in accordance with the manufacturers instructions. Bond the steel plates together in a suitable jig (fo
48、r example, see Figure 4) in order to achieve a glueline thickness of (0,65 0,05) mm. Allow the adhesive to cure for at least seven days at (+ 21 2) C, (60 10) % relative humidity, before inserting the wedge at a rate of 50 mm/min to its full depth of 25 mm in a suitable compression testing machine.
49、7 Test procedures 7.1 Testing of the concrete-to-concrete specimens After the specimens have undergone the appropriate environmental regime, they shall be conditioned for 24 h at (21 2) C and (60 10) % relative humidity. The test and control specimens shall then be tested in shear as Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:45:11 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13733:2002 (E) 7 shown in Figures 1a) and