《BS-EN-13740-1-2003.pdf》由会员分享，可在线阅读，更多相关《BS-EN-13740-1-2003.pdf（18页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13740-1:2003 Agricultural machinery Solid fertilizer line-distributors Environmental protection Part 1: Requirements The European Standard EN 13740-1:2003 has the status of a British Standard ICS 65.060.25 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 01:39:59 GMT+0
2、0:00 2006, Uncontrolled Copy, (c) BSI BS EN 13740-1:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 8 May 2003 BSI 8 May 2003 ISBN 0 580 41789 1 National foreword This British Standard is the official English language version of EN 13740
3、-1:2003. The UK participation in its preparation was entrusted to Technical Committee AGE/32, Agricultural implements and trailers, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standar
4、ds which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This p
5、ublication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible interna
6、tional/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN tit
7、le page, pages 2 to 14, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 01:39:59 GMT+00:00 2006, Unco
8、ntrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13740-1 April 2003 ICS 65.060.25 English version Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 1: Requirements Matriel agricole - Distributeurs dengrais solides en lignes - Pro
9、tection de lenvironnement - Partie 1: Prescriptions Landmaschinen - Reihen-Mineraldngerstreuer - Umweltschutz - Teil 1: Anforderungen This European Standard was approved by CEN on 28 February 2003. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditio
10、ns for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three offic
11、ial versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Bel
12、gium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR N
13、ORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2003 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13740-1:2003 E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 01:39:59 GMT+00:00 2006, Uncontrolled Copy, (c)
14、 BSI EN 13740-1:2003 (E) 2 Contents Foreword3 Introduction.4 1Scope 4 2Normative references 4 3Terms and definitions5 4Requirements.6 4.1General6 4.2Hopper filling opening.6 4.3Cleaning and emptying of residuals6 4.4Contact with obstacles6 4.5Marker system7 4.6Estimation of hopper volume .7 4.7Adjus
15、tment of flow rate.8 4.8Flow rate regulation system .8 4.9Adjustment for working width8 4.10Feeding device.8 4.11Spillage .8 4.12Evenness of transversal distribution.8 4.13Setting of flow rate.9 4.14Evenness of obtained flow rate9 5Instruction handbook 9 6Verification10 Annex A (informative) Checkli
16、st for the instruction handbook for solid fertilizer line-distributors12 Bibliography14 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 01:39:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13740-1:2003 (E) 3 Foreword This document (EN 13740-1:2003) has been prepared by Technical Committee C
17、EN /TC 144 “Tractors and machinery for agriculture and forestry“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2003, and conflicting national
18、standards shall be withdrawn at the latest by October 2003. This European Standard consists of the following Parts under the general title Agricultural machinery Solid fertilizer line-distributors Environmental protection: Part 1: Requirements Part 2: Test methods Annex A is informative. According t
19、o the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway
20、, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 01:39:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13740-1:2003 (E) 4 Introduction The objective of this European Standard is to specify requirements for fertilizer dis
21、tributors used according to the instruction handbook, so that: unintentional spreading of fertilizers is avoided; an even distribution of fertilizer with the desired application rate is achieved. This European Standard does not include any direct requirements for the longitudinal distribution. The r
22、equirements for evenness of flow rate will partly cover that subject. 1 Scope This European Standard specifies requirements for the environmental protection for design and construction of mounted, trailed and self-propelled solid fertilizer line-distributors, including such machines attached to a ba
23、sic machine, used in agriculture and horticulture. It also gives the requirements for the minimum content of the instruction handbook. NOTEThe standard is also applicable to seed drills if it is stated by the machine manufacturer that the machine is suitable for fertilizer application. This standard
24、 does not apply to machines which are: equipment for distributing liquid fertilizer; or equipment for distributing liquid or granulated pesticides; or solid fertilizer broadcasters and full width distributors (which are dealt with in EN 13739-1 and in EN 13739-2). Personal safety aspects have not be
25、en considered in this standard; they are dealt with in prEN 14017. If the term “machine“ is used, it covers both drilling and spreading line-distributors, except in the definitions. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other public
26、ations. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revision of any of these publications apply to this European Standard only when incorporated in it by amendment or revision.
27、 For undated references the latest edition of the publication referred to applies (including amendments). EN 13740-2:2003, Agricultural machinery - Solid fertilizer line-distributors - Environmental protection - Part 2: Test methods. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 01:39:59 GM
28、T+00:00 2006, Uncontrolled Copy, (c) BSI EN 13740-1:2003 (E) 5 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply: 3.1 solid fertilizer line-distributor solid fertilizer distributor which spreads fertilizer in bands separated by bands withou
29、t fertilizer and which has a working width which is roughly the same as the machine width 3.2 spreading line-distributor solid fertilizer line-distributor which spreads fertilizer in bands over the surface 3.3 drilling line-distributor solid fertilizer line-distributor which places fertilizer in ban
30、ds through a coulter into the soil 3.4 solid fertilizer line-distributor attached to a basic machine machine which lays down fertilizer in bands on the soil or into the soil and is combined with another machine for example combined grain and fertilizer drill or extra equipment for solid fertilizer d
31、istributors 3.5 combined grain and fertilizer drill machine which simultaneously applies seed and fertilizer 3.6 working width distance between two adjacent tramlines 3.7 application rate weight applied in the band of solid fertilizer applied per unit area, in kg/ha 3.8 spillage fertilizer which fal
32、ls uncontrolled from the machine to the ground when the feeding device is closed or disengaged 3.9 flow rate amount of solid fertilizer leaving the feeding system(s), in kg/min NOTEThe relation between the flow rate and the application rate is given by the following formula: Flow rate (kg/min) = app
33、lication rate (kg/ha) travelling speed (km/h) band width (m) number of bands: 600 3.9.1 intended flow rate flow rate desired by the user 3.9.2 obtained flow rate flow rate given by the machine for a certain machine control setting during spreading in simulated conditions as described in EN 13740-2:2
34、003. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 01:39:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13740-1:2003 (E) 6 4 Requirements 4.1 General The machine shall be designed to allow easy handling and adjustments for different types of fertilizers to be used, in order to ensure that
35、 the chosen amount of fertilizer per area is spread evenly and in the area at which it is aimed. The machine shall fulfil at least the requirements given in 4.2 up to 4.14. NOTEThe manufacturer should also take in consideration that the machine may work in a corrosive environment. 4.2 Hopper filling
36、 opening The machine shall be designed to minimize the risk that undesirable materials will cause blockages and influence the flow rate or transversal distribution in a negative way. This can for example be achieved by a grid. Hoppers with a volume equal to or greater than 1 000 l shall be so constr
37、ucted that it is possible to fill the hopper with bulk fertilizer from a bucket, 1,5 m wide or from big bags of 1 000 kg. 4.3 Cleaning and emptying of residuals Emptying and collecting the fertilizer from the hopper shall be possible without spreading or drilling and without unintentional flow to th
38、e ground. If tools are necessary to empty the hopper, they shall be delivered with the machine and a place shall be provided on the machine for their storage. It shall be possible for a person standing on the ground or on the existing access means to clean the machine. 4.4 Contact with obstacles 4.4
39、.1 General On a spreading line-distributor fitted with booms with a working width more than 10 m, the outer end of the boom shall be able to move backwards in case of contact with obstacles in the field. If the spreading distributor is moved forwards at 8 km/h and the obstacle is within 90 % to 100
40、% of half the boom width measured from the middle of the track, the boom or sections of the boom shall be able to give away without being damaged (see Figure 1). The boom sections shall return automatically to their original position after contact with the obstacle. Licensed Copy: sheffieldun sheffi
41、eldun, na, Mon Oct 30 01:39:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13740-1:2003 (E) 7 Key 1Half boom width Figure 1 Identification of half boom width 4.4.2 Construction and actions of coulters Line-distributors which are designed for drilling fertilizer (drilling line-distributors) shall h
42、ave coulters which have an overload protection system for each coulter or a group of coulters, to avoid damages caused by objects fixed in the soil. The working depth of the coulters shall be adjustable. 4.5 Marker system Combined drills wider than 4 m, for drilling fertilizer into the soil, shall b
43、e equipped with a marker system which gives the possibility to choose correct distance to next tramline. 4.6 Estimation of hopper volume The basic-hopper of the machine (e.g. the hopper without any extension walls), shall be fitted with a scale in litres by which the volume of fertilizer in the hopp
44、er can be determined. In case of an adjustable partition wall of the hopper (for example in combined drills), the hoppers shall be equipped with scales to indicate the actual volume hopper with different adjustments at each position of the partition wall. The scale shall cover at least 10 % to 80 %
45、of the basic-hopper volume and have a graduation for at least each 10 % of the nominal volume of the basic- hopper. The accuracy of the graduations shall be within 10 % of the reading. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 01:39:59 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13740
46、-1:2003 (E) 8 4.7 Adjustment of flow rate 4.7.1 Machines with a hopper volume of 600 l or more, shall either be equipped with: relevant calibration aids (for example chute, guide, collector) to adjust the flow rate; or a system which controls the flow rate automatically (for example load-sensor, mas
47、s flow control). 4.7.2 If the machine is fitted with a manually controlled system which allows a variation of the flow rate, then this variation range shall be at least 20 % of the intended flow rate, not exceeding the limit values defined in 4.14.2. 4.7.3It shall be possible to make the adjustment
48、stepless or in steps of maximum 10 % of the intended flow rate. 4.8 Flow rate regulation system If the machine is fitted with an automatic system which controls the flow rate, depending on speed, working width and application rate, the deviation of the obtained flow rate to the intended flow rate sh
49、all fulfil the requirements of Table 1. The adjustment of the feeding system with fertilizer of type a) as defined in 4.2 and 4.3 of EN 13740-2:2003 shall occur within 5 s when adjusting the flow rate from flow rate 3 by 50 %, but shall not exceed the limit values defined in 4.13.1. 4.9 Adjustment for working width For machines where the working width can be altered it shall be possible to adjust the machine to a different working width (for example to a reduced wo