《BS-EN-13489-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-13489-2002.pdf（26页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13489:2002 Wood flooring Multi-layer parquet elements The European Standard EN 13489:2002 has the status of a British Standard ICS 79.080 ? Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS EN 13489:2002 This British
2、Standard, having been prepared under the direction of the Building and Civil Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 7 January 2003 BSI 7 January 2003 ISBN 0 580 41069 2 National foreword This British Stand
3、ard is the official English language version of EN 13489:2002. The UK participation in its preparation was entrusted to Technical Committee B/543, Round and sawn timber, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary
4、. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue
5、or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the te
6、xt; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front co
7、ver, an inside front cover, the EN title page, pages 2 to 23 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51 GMT+
8、00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13489 December 2002 ICS 79.080 English version Wood flooring - Multi-layer parquet elements Planchers en bois - Elments de parquet contrecollHolzfubden - Mehrschichtparkettelemente This European Standard was
9、approved by CEN on 4 November 2002. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nat
10、ional standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and not
11、ified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzer
12、land and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. E
13、N 13489:2002 E Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13489:2002 (E) 2 Contents page Foreword3 Introduction.4 1Scope 5 2Normative references 5 3Terms and definitions5 4Specific product requirements.6 4.1Wood species.6 4.2Typical
14、types and patterns6 4.3Finishing.7 4.4Appearance.7 4.4.1General rules7 4.4.2Classification rules for type 1, 2 and 3 parquet7 4.4.3Classification rules for type 4 parquet 12 4.4.4Natural colours.12 4.5Moisture content12 4.6Geometrical characteristics12 4.6.1General12 4.6.2Dimensional characteristics
15、 and limit deviations 12 4.7Technical specification and properties .13 4.7.1General13 4.7.2Technical characteristics required when in service.13 4.7.3Specific site requirements13 4.7.4Appearance.13 4.7.5Renovation and repair.14 5Marking .14 Annex A (informative) Botanical and trade names of the most
16、 commonly used species for wood flooring (hardwood and softwood species)15 Annex B (normative) Principles for the classification of the free class21 Bibliography23 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13489:2002 (E) 3 Foreword
17、This document (EN 13489:2002) has been prepared by Technical Committee CEN /TC 175, “Round and sawn timber“ the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest
18、by June 2003, and conflicting national standards shall be withdrawn at the latest by June 2003. In this European Standard annex A is informative and annex B is normative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to i
19、mplement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51
20、GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13489:2002 (E) 4 Introduction This European Standard is one of a series of standards about wood flooring and wood panelling and cladding. This standard specifies the characteristics of multi-layer parquet. It is based upon current dimensional standards u
21、sed in the industry and other characteristics together with functions which have been verified by test. A large amount of knowledge exists about multi-layer parquet and values for product characteristics are attested by long use and experience. It is therefore not necessary to have test results. For
22、 new products technical data will have to be verified by testing. The appearance of the parquet floor is mainly influenced by species, classification and the pattern. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13489:2002 (E) 5 1 Scop
23、e This European Standard specifies the characteristics of multi-layer parquet elements for internal use as flooring. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate p
24、laces in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard, only when incorporated in it by amendment or revision. For undated references the latest edition of the publication r
25、eferred to applies (including amendments). EN 1310:1997, Round and sawn timber - Method of measurement of features. EN 1311, Round and sawn timber - Method of measurement of biological degrade. EN 1534, Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method. E
26、N 13183-1, Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method. EN 13488, Wood flooring Mosaic parquet elements. EN 13647, Wood and parquet flooring and wood panelling and cladding - Measurement of geometrical characteristics. EN 13756, Wood flooring Terminology. 3
27、Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 13756 and the following apply. 3.1 cup curvature of an element across the width of the face EN 13756 3.2 spring lengthwise curvature of an element normal to the edge EN 13756 NOTEIt should be meas
28、ured with zero bow. 3.3 multi-layer parquet element of laminated construction consisting of a top layer of solid wood and additional layer(s) of wood, or wood- based materials, glued together EN 13756, 2.4 Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51 GMT+00:00 2006, Uncontrolled C
29、opy, (c) BSI EN 13489:2002 (E) 6 3.4 strip smallest single item forming the top layer of each element. 3.5 element smallest individual piece or the smallest piece as delivered prior to installation EN 13756 3.6 lipping difference in height between the faces of two adjacent and assembled elements whe
30、n laid on a flat surface EN 13756 4 Specific product requirements 4.1 Wood species A list of the most commonly used species for parquet as described in this standard is given in Annex A. 4.2 Typical types and patterns Figures 1 to 4 give examples of common types/patterns of multi-layer parquet eleme
31、nts. Figures 2 and 3 are examples of types which are intended for patterned installation. Elements in Figure 3 are usually of smaller dimensions. Figure 1 Type 1 Figure 2 Type 2 Figure 3 Type 3 (an element intended for patterned installation) Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05
32、:22:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13489:2002 (E) 7 Figure 4 Type 4 4.3 Finishing The surface treatment used and any artificial change of the natural wood colour shall be stated in the product description. NOTEThe product is usually delivered with a factory applied surface coating
33、which allows the product to be taken into use immediately after installation. 4.4 Appearance 4.4.1 General rules Tables 1 to 4 define the classification relating to appearance rules for the face and for the non-visible parts (back and edges) of an element of the most commonly used species for multi-
34、layer parquet as defined in this standard. Features shall be measured according to EN 1310 (knots assessed according to the general method of 4.1 in EN 1310:1997). Biodeterioration is measured according to EN 1311. A classification with three appearance classes is specified, designated ?, and ?. A c
35、lassification named Free class is based on the principles laid out in Annex B. The material used for the top layer shall be selected hardwood or softwood, fresh and sound without rot, fungus, mould or insect damage. There will be variations from strip to strip, but the total impression of the instal
36、led floor shall show a homogeneous character of each classification. To allow for unavoidable classification differences, 3 % of the strips in a batch may be from other classes. Any additional strips from other classes are allowed as long as the general impression of the floor is not disturbed. Mult
37、i-layer parquet with a mosaic-like pattern shall be classified according to EN 13488. 4.4.2 Classification rules for type 1, 2 and 3 parquet 4.4.2.1 Rules for the most commonly used species 4.4.2.1.1 Quercus spp. (oak) Rules for oak are given in Table 1. Licensed Copy: sheffieldun sheffieldun, na, M
38、on Oct 30 05:22:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13489:2002 (E) 8 Table 1 Classification for Quercus spp. (oak) Face of the element Class Features ? ? Sound sapwood Not permitted Permitted up to 50 % of the face, if distributed Knots a Sound and intergrown Unsound knots Permitted if:
39、 diameter 3 mm diameter 1 mm if not grouped together b Permitted if: diameter 8 mm diameter 2 mm Checks Not permitted Permitted up to 20 mm in length per strip Bark pockets Not permitted Not permitted Lightning shake Not permitted Not permitted Slope of grain Permitted, no limit Permitted, no limit
40、Colour variation Slight variation permitted Permitted Medullary ray Permitted Permitted All features permitted without limit to size or quantity if these do not impair the strength or the wearing quality of the parquet flooring. Biodeterioration Not permitted Not permitted Not permitted, except blue
41、 stain and black holes. Non-visible parts All features permitted without limit to size or quantity if these do not impair the strength or the wearing quality of the parquet flooring. a Cracks in knots and knot holes shall be filled. b Knots are grouped together if the distance separating them, measu
42、red from edge to edge, does not exceed 30 mm. Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13489:2002 (E) 9 4.4.2.1.2 Fraxinus excelsior (European ash), Fagus sylvatica (European beech), Betula spp. (birch) and Acer spp. (maple) Rules
43、for European ash, European beech, birch and maple are given in Table 2. Table 2 Classification for Fraxinus excelsior (European ash), Fagus sylvatica (European beech), Betula spp. (birch) and Acer spp. (maple) Face of the element Class Features ? ? Sound sapwoodNot applicableNot applicableNot applic
44、able Knots a Sound and intergrown Unsound knots Permitted if: diameter 3 mm diameter 1 mm if not grouped together b Permitted if: diameter 8 mm c diameter 2 mm c ChecksNot permittedPermitted up to 20 mm in length per strip Bark pocketsNot permittedNot permitted Lightning shakeNot permittedNot permit
45、ted Slope of grainPermitted, no limitPermitted, no limit Colour variationSlight variation permittedd. Slight traces of natural discoloration permitted Permitted Red heart and black hearte Not permittedPermitted up to 50 % of the face, if distributed Stick marksNot permittedPermitted Medullary rayPer
46、mittedPermitted All features permitted without limit to size or quantity if these do not impair the strength or wearing quality of the parquet flooring. BiodeteriorationNot permittedNot permittedNot permitted, except blue stain and black holes Non-visible parts All features permitted without limit t
47、o size or quantity if these do not impair the strength or wearing quality of the parquet flooring. a Cracks in knots and knot holes shall be filled. b Knots are grouped together if the distance separating them, measured from edge to edge, does not exceed 30 mm. c No limitation in Betula spp. (birch)
48、. d Permitted for steamed beech. e Brown heart for birch and maple Licensed Copy: sheffieldun sheffieldun, na, Mon Oct 30 05:22:51 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13489:2002 (E) 10 4.4.2.1.3 Larix spp. (larch), Pinus sylvestris (redwood; Scots pine) and Picea spp. (spruce) Rules for la
49、rch, redwood; Scots pine and spruce are given in Table 3. Table 3 Classification for Larix spp. (larch), Pinus sylvestris (redwood; Scots pine) and Picea spp. (spruce) Face of the element Class Features ? ? Sound sapwoodPermittedPermitted Knots a Sound and intergrown Unsound knots Permitted if: diameter 12 mm diameter 5 mm if not grouped together b Permitted if: diameter 25 mm diameter 15 mm ChecksNot permittedPermitted up to 40 mm in length per