《BS-EN-13530-3-2002.pdf》由会员分享，可在线阅读，更多相关《BS-EN-13530-3-2002.pdf（22页珍藏版）》请在三一文库上搜索。
1、BRITISH STANDARD BS EN 13530-3:2002 Incorporating Amendment No. 1 Cryogenic vessels Large transportable vacuum insulated vessels Part 3: Operational requirements The European Standard EN 13530-3:2002, with the incorporation of amendment A1:2005, has the status of a British Standard ICS 23.020.40 ? L
2、icensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 13530-3:2002 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 May 2002 BSI 6 March 2006 ISBN 0 580 39778 5 National foreword This B
3、ritish Standard is the official English language version of EN 13530-3:2002, including amendment A1:2005. The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags ?. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, te
4、xt altered by CEN amendment A1 is indicated in the text by ?. The UK participation in its preparation was entrusted to Technical Committee PVE/18, Cryogenic vessels, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cr
5、oss-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or o
6、f British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text;
7、present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an
8、inside front cover, the EN title page, pages 2 to 18, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 15895March 2006See national foreword Licensed Copy: sh
9、effieldun sheffieldun, na, Sun Oct 29 09:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13530-3 May 2002 ICS 23.020.40 English version Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3: Operational requirements Rcipients
10、cryogniques - Grands rcipients transportables, isols sous vide - Partie 3:Exigences de service (inclut lamendement A1:2005) Kryo-Behlter - Groe ortsbewegliche, vakuum-isolierte Behlter - Teil 3: Betriebsanforderungen (enthlt nderung A1:2005) This European Standard was approved by CEN on 3 January 20
11、02; amendment A1:2005 was approved by CEN on 19 May 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc
12、es concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into it
13、s own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem
14、bourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T E U R O P E N D E N O R M A L I S A T I O N E U R O P IS C H E S K O M IT E E F R N O R M U N G Management Centre: rue de Stassart,
15、 36 B-1050 Brussels 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13530-3:2002 + A1:2005 E +A1 June 2005 (includes amendment A1:2005) Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:38 GMT+00:00 2006, Uncontroll
16、ed Copy, (c) BSI EN 13530-3:2002 (E) 2 Contents page Foreword3 Introduction.4 1 Scope5 2 Normative references5 3 Terms and definitions .5 4 Preliminaries before putting into service6 4.1 General6 4.2 Marking and labelling6 4.3 Handover documents6 5 Personnel training .6 6 General safety requirements
17、6 6.1 General6 6.2 Safety considerations .7 7 Putting into service .7 8 Location8 9 Transport within the location .9 10 Filling 9 10.1 Prefill checks9 10.2 Preparations.9 10.3 After fill check10 11 Product withdrawal10 12 Change of service10 13 Taking out of service.11 14 Maintenance and repair.11 1
18、5 Periodic inspection12 16 Additional requirements for flammable gases .12 16.1 General safety requirements (see also clause 6).12 16.2 Putting into service (see also clause 7)13 16.3 Location (see also clause 8).13 16.4 Transport within the location (see also clause 9)13 16.5 Filling (see also clau
19、se 10).13 16.6 Change of service (see also clause 12) 14 16.7 Taking out of service (see also clause 13) .14 16.8 Maintenance and repair (see also clause 14) .14 17 Emergency equipment/procedures14 Annex A (informative) Example of an emergency procedure15 Annex B (informative) Qualification of exist
20、ing national large transportable cryogenic vessels for use in the European Union 16 Bibliography18 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13530-3:2002 (E) 3 Foreword This document EN 13530-2:2002 has been prepared by Technical Co
21、mmittee CEN/TC 268 “Cryogenic vessels“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting national standards shall be withdr
22、awn at the latest by November 2002. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). In this standard the annexes A and B are informative. Users of this Eu
23、ropean Standard, prepared in the field of application of Article 118A of the EC Treaty, should be aware that standards have no formal legal relationship with Directives that may have been made under Article 118A of the Treaty. In addition, national legislation in the Member states can contain more s
24、tringent requirements than the minimum requirements of a Directive based on Article 118A. Information on the relationship between the national legislation implementing Directives based on Article 118A and this European Standard may be given in a national foreword of the national standard implementin
25、g this European Standard. EN 13530 consists of the following parts under the general title, Cryogenic vessels Large transportable vacuum insulated vessels: Part 1: Fundamental requirements. Part 2: Design, fabrication, inspection and testing. Part 3: Operational requirements. This European Standard
26、has been submitted for reference into the RID and/or in the technical annexes of the ADR. Therefore in this context the standards listed in the normative references and covering basic requirements of the RID/ADR not addressed within the present standard are normative only when the standards themselv
27、es are referred to in the RID and/or in the technical annexes of the ADR. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germ
28、any, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This European Standard (EN 13530-3:2002/A1:2005) has been prepared by Technical Committee CEN/TC 268 “Cryogenic vessels”, the secretaria
29、t of which is held by AFNOR. This Amendment to the European Standard EN 13530-3:2002 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2005 and conflicting national standards shall be withdrawn at the latest by D
30、ecember 2005. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). According to the CEN/CENELEC Internal Regulations, the national standards organizations of t
31、he following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain
32、, Sweden, Switzerland and United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13530-3:2002 (E) 4 Introduction Elements of this European Standard support the requirements of the framework Directives on Transport of Dangerous Go
33、ods and other international, national or local requirements. Large transportable cryogenic vessels are often partly equipped by the manufacturer, but can be installed or re- installed by another party, such as the operator, user or owner. For this reason some of the scope this European Standard, whi
34、ch includes putting into service, inspection, filling, maintenance and emergency procedure overlaps with some of the parts EN 13530-1 and prEN 13530-2. Operational requirements for the usage of these vessels on public road, rail, sea and air are not covered in this standard, but are defined in other
35、 International, national or local requirements. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13530-3:2002 (E) 5 1 Scope 1.1This European Standard specifies operational requirements for large transportable vacuum insulated cryogenic ves
36、sels of more than 1000 l volume. 1.2This European Standard applies to vessels designed for cryogenic fluids specified in EN 13530-1. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at
37、the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of
38、the publication referred to applies (including amendments). EN 12300, Cryogenic vessels - Cleanliness for cryogenic service. EN 13530-1, Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements. prEN 13530-2, Cryogenic vessels - Large transportable vacuum i
39、nsulated vessels - Part 2: Design, fabrication, inspection and testing. 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply in addition to those given by EN 13530-1. 3.1 putting into service operation by which a vessel is prepared to be used.
40、 It applies to either a new vessel being used for the first time or an existing vessel being returned to service 3.2 filling operation by which a transportable vessel undergoes a prefill check, filling with a cryogenic fluid and an after fill check 3.3 withdrawal process by which product is taken fr
41、om a vessel to the connected supply system 3.4 outdoor location location outside of any building or structure and not enclosed by more than two walls 3.5 underground location area or room whose ground or floor is on all sides sufficiently lower than the adjacent ground surfaces 3.6 vessel vessel mea
42、ns large transportable cryogenic vessel as defined in EN 13530-1 Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13530-3:2002 (E) 6 4 Preliminaries before putting into service 4.1 General Before putting into service, verification shall ta
43、ke place to ensure that the vessel is suitable for the intended service and that the marking, labelling and handover documents are complete. 4.2 Marking and labelling Marking and labelling shall be in accordance with EN 13530-1. 4.3 Handover documents In addition to the manufacturers documentation,
44、where necessary the cryogenic vessel shall be accompanied by vessel specific documents and instructions for all items supplied covering the: ? operation; ? auxiliary equipment; ? inspection records. These documents shall be retained by the owner of the vessel. The user shall have appropriate operati
45、ng instructions available. Such instructions may be attached to the vessel in a permanent manner, or carried by or available to the operator. 5 Personnel training Only persons trained for the specific task shall be allowed to put into service, fill, handle, operate or maintain the vessel. The traini
46、ng programme shall include: ? normal procedures; ? product and hazard identification; ? safe operating limits; ? emergency procedures (see annex A); ? physical and chemical properties of the vessels content and their effects on the human body; ? personal protection. Training shall be repeated as nec
47、essary to ensure that personnel remain competent. A record should be maintained which details the training personnel have received. 6 General safety requirements 6.1 General Before any operation the operator should ensure that all equipment is free from any obvious damage or defect which can effect
48、its safe operation. Licensed Copy: sheffieldun sheffieldun, na, Sun Oct 29 09:59:38 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 13530-3:2002 (E) 7 Marking and labelling shall not be removed or defaced. Consideration should be given to the product properties and the use of appropriate personal prot
49、ective equipment. Parts under pressure shall be disconnected only if they have been previously depressurised. When under pressure, leaking valves or connections shall only be tightened using suitable tools and procedures. Direct flame or direct intense heat shall never be used to raise the pressure or de-ice frozen valves. All surfaces which can come in contact with the product shall be kept free from oil and grease and shall fulfil the requirements of EN 12300. Outlets